MEBLIX makes custom loft-style furniture in Almaty: kitchens, wardrobes, tables, countertops from solid wood and slabs, shelves. As a direct manufacturer, we offer a free measurement with samples, a 3D design in 1–2 days, our own workshop, installation by our own crews and a 24-month warranty on the item under the contract.
Loft is recognized by the combination of wood and metal, but in an apartment it works differently than in a former factory floor. We show what makes up the style and how to adapt it to real living space.
What makes up loft in an interior
Loft is distinguished by open construction — a visible metal frame, massive wood, simple geometric shapes and deliberately "honest" materials with no decorative disguise. The basis of such an item is a steel profile tube and solid oak, ash or kiln-dried pine: wood stays wood, metal stays metal, with no film or imitation. In carcass elements the same principle is supported by laminated chipboard with "concrete", "metal" and "wood" decors and live-edge slabs, where the grain pattern and knots are not hidden but emphasized. Loft differs from Scandinavian style in weight and contrast — dark metal against light wood — and from industrial style in being less rough: weld seams are ground down, surfaces are sanded, so the pieces suit a living room, not just a workshop. If you are choosing between these directions, keep one difference in mind: loft forgives large forms but does not forgive careless edge and seam finishing — that is exactly what makes it read as a style rather than as an unfinished build.
How to fit loft into a small apartment
In an apartment loft works in doses: one or two accent pieces (a table, a shelving unit, a bar counter) against a neutral background, not the whole interior in a "factory" key. A room overloaded with details loses air, and a large metal frame in a narrow passage becomes an obstacle. It is more practical to rely on the dimensions of the space rather than on a picture: a made-to-measure item lets you adjust the countertop depth, shelf height and frame dimensions so that the loft piece does not "eat up" the passage and does not clash with the rest of the furnishings. For small areas, verticality works well — a tall narrow shelving unit instead of a wide one, a console table against the wall, shelves above the work area. Zoning then stays with the style: a loft table separates the kitchen from the living room without a solid partition. Start with a measurement and a layout plan, not with choosing a texture — then the loft piece will fall into place and won't require remodeling.
What to pair loft with and what to avoid
- Modern finishes: neutral walls and minimal decor let loft pieces sound at full strength.
- Concrete and brick: support the industrial character of wood and metal without overpowering their texture.
- Leather: in the upholstery of chairs and sofas, it reinforces the "honest" surface next to solid wood and steel.
- Classics with carving: clashes with the simple geometric shapes of loft and breaks the contrast of materials.
- An abundance of decor: overloads the interior and dampens the contrast of textures that the style is chosen for.
What materials and hardware we use to make loft furniture
In loft, material is not a background but part of the construction. We explain which species, metal and hardware we use to assemble items and why we choose exactly these.
Solid wood and slabs for countertops and shelves
We make countertops and shelves from kiln-dried oak, ash and pine with a moisture content of 8–10 %, and for expressive countertops we take live-edge slabs and fill the cracks with epoxy resin. Oak gives a dense, fine-grained texture and holds its shape over long spans, ash is lighter and resembles oak in pattern at a lower weight, and pine is the most affordable option for shelves and open shelving units. A live-edge slab keeps the bark and the uneven contour of the board, so every such countertop turns out one of a kind. The finish is oil or lacquer: oil emphasizes the species and allows the surface to be refreshed locally, while lacquer gives denser protection against moisture. A moisture content of 8–10 % is not a formality: over-dried or under-dried solid wood behaves unpredictably after installation, so we measure moisture before cutting, not after.
Metal frames and powder coating
We weld frames and supports from steel profile tube and coat them by the powder method — most often matte black, but we also match other RAL colors to the interior. Profile tube of various sections goes into table legs, shelving frames, bases for slab countertops and open wardrobe frames. Powder coating holds up better than liquid enamel: the finish does not chip at the edges and does not wear where the frame meets the floor. Matte black is the base color of loft, but if the walls or backsplash are in a different shade, we coat the frame to match from the RAL palette so the metal does not clash with the rest of the finish. We grind the weld seams before coating: an uncoated or untreated seam is the first thing to rust and spoil the look of the frame, so this operation comes before the chamber, not after.
Carcasses, fronts and hardware for kitchens and wardrobes
what we build carcasses, fronts and hardware for kitchens and wardrobes from| Element | Material / solution | What it brings to loft |
|---|
| Carcass | Egger, Kronospan laminated chipboard | Concrete, metal and wood décors |
|---|
| Front | Enameled MDF, laminated chipboard | Matte surfaces with an industrial feel |
|---|
| Hinges and lift mechanisms | Blum | Smooth operation, 25-year manufacturer's warranty |
|---|
| Drawer runners | Blum, Hettich | Even extension under load |
|---|
| Handles and rails | Black metal | Support the color of the frame |
|---|
What items we make in loft style
Loft in the interior is not just tables and chairs. We show which items are ordered from us most often and how each one differs in construction.
Loft style kitchens
We make loft style kitchens with fronts in concrete, metal or wood décors and open shelves on a metal frame — kitchens remain one of the workshop's most frequent tasks, with 3 500+ completed projects in total. We build carcasses and fronts from Egger and Kronospan laminated chipboard, with some elements in enameled MDF. We mount rails and black handles on the metal frame so the texture reads in the same line as the shelves. Open sections are convenient for dishes needed every day, while heavy supplies go into closed drawers on Blum runners — so the loft aesthetic does not get in the way of cooking. Making loft style furniture for the kitchen starts with a measurement: there we show décor samples and metal color samples so the textures match under your lighting.
Wardrobes and storage systems
We build loft-style wardrobes to the dimensions of the wall or niche, with fronts featuring wood, concrete or metal decor and black hardware. The carcass is made from Egger and Kronospan laminated chipboard, the fronts from enameled MDF or the same laminated chipboard with textured decor. Blum hinges and lift mechanisms hold heavy fronts smoothly, and the manufacturer's warranty on them is 25 years. In a loft wardrobe, what matters is not only the texture of the front but also how it opens: Blum hinges and lift mechanisms hold the doors smoothly, without slamming. Before cutting, we check the moisture content of the solid wood, and before shipping we do a test assembly in the workshop — checking whether the carcass wobbles on a level floor.
Tables, countertops and shelves
We make dining and work tables on a metal frame with solid wood or a slab on top, and shelves from the same solid wood and square steel tubing, so the whole line reads as one set. Countertops are made from kiln-dried oak, ash and pine with a moisture content of 8–10 %, slabs with a live edge and cracks filled with epoxy resin. Frames are welded from square steel tubing and powder-coated in matte black or another RAL color. For a table, what matters more than thickness "by eye" is the combination of countertop weight and frame rigidity: too thin a tube under a heavy slab causes play, so we calculate the frame for the specific countertop. For the measurement we bring samples of solid wood, laminated chipboard decors and metal color swatches — it's easier to choose a texture that suits the light in your room.
How to order loft furniture to fit your apartment
Making custom loft furniture directly from the manufacturer is a sequence of steps from measurement to the acceptance report, and at each stage it's clear what is happening and what you get.
Free measurement and 3D design
Measurement and 3D design are free with us: for the measurement we bring samples of solid wood, laminated chipboard decors and metal color swatches, and we prepare the design in 1–2 days. A technician measures the walls, niches and slopes, notes utility outlets and floor unevenness so the carcass fits without gaps or on-site trimming. You show a sketch or reference — they make it easier to understand proportions, countertop thickness and hardware type. As a result you get a drawing with dimensions and a visualization showing front textures, metal frame color and section layout. Samples at the measurement matter more than a catalog on screen: it's easier to choose the metal color and wood texture when you hold the swatch next to the walls and interior items rather than comparing photos.
Workshop production and installation
We make every item in our own 600 m² workshop in Almaty — from cutting solid wood and welding the frame to test assembly — and then install with our own crews. The carpentry area planes and glues panels and finishes live-edge slabs; metal frames are welded from square tubing and powder-coated in matte black or another RAL color, carcasses and fronts are cut from laminated chipboard and MDF. We measure the moisture content of solid wood before cutting and grind welds before painting. Test assembly in the workshop before shipping is needed to check whether the item wobbles on a level floor: catching this on site is harder than in the workshop, where the frame can be adjusted before installation. Installers arrive with finished parts and fasteners, level the items and connect the hardware.
Lead times, payment and order acceptance
Lead times for each option are listed in the price list on this page, and rush orders are possible; payment is a 50% deposit, with the balance after signing the acceptance certificate, and we work by bank transfer. Delivery within the city and up to 30 km is free for a large order, beyond 30 km — for an extra charge. We sign the acceptance certificate after installation, not at shipment: that way you accept furniture that has already been assembled and set up, not boxes, and all comments are recorded before the final payment. We structure acceptance according to the points of the contract — you check the geometry, edges, and operation of doors and drawers. Custom loft-style furniture is more convenient to accept when the project and installation are handled by one team: you don't have to redirect a claim between contractors.
Quality, warranty and care of loft furniture
The quality of loft furniture comes from control at every stage of the workshop and clear warranties under the contract, and the service life of an item largely depends on how it is cared for after installation.
How we control quality
We measure the moisture of solid wood before cutting, grind welded seams before painting, and before shipping we do a test assembly and check whether the item wobbles on a level floor. A moisture measurement shows whether the panel will warp after installation in an apartment with dry air. Grinding the seam before powder coating removes scale and ridges that make the paint go on unevenly and eventually start to peel. Test assembly in the workshop reveals play in the frame and skew in the supports before the item goes to the customer. These three checks cover three different risks — how the wood behaves after installation, corrosion along the seam, and frame play — which is why they happen at different times rather than in a single final inspection. When such items are made to order, the order of checks matters more than the final inspection: a defect at an early stage is cheaper to fix than to redo a finished countertop.
Warranty on the item and hardware
We give a 24-month warranty on the item under the contract, and Blum hardware carries a 25-year manufacturer's warranty. Twenty-four months cover our work: frame geometry, welding quality, painting and assembly. The manufacturer's twenty-five years apply to Blum hinges, lift mechanisms and drawer runners — that is the service life of the mechanism itself, not of the whole item. Hettich and Boyard hardware is subject to its own manufacturer's terms, so the contract lists them separately for each supplier. The warranty on the item and the warranty on hardware are different things: the first covers our work under the contract, the second comes from the hardware manufacturer, so we set out the terms in the contract as separate lines. When ordering loft furniture, it is worth clarifying this before signing: change the hardware for another and its term will be calculated under the new supplier's terms.
Care of solid wood and metal
- Wiping: a soft cloth and moderately damp cleaning without abrasives or stiff sponges.
- Wet spots: wipe up immediately, do not leave water on solid wood for long — otherwise the grain swells.
- Hot dishes: place on a trivet, not directly on the countertop, so the oil or lacquer finish is not damaged.
- Heat sources: keep solid wood away from radiators and the stove, otherwise the geometry of the panel changes.
- Metal: ordinary damp cleaning, without aggressive chemicals — powder coating does not like solvents and acids.
The bottom line on loft-style furniture
This section gathers what is worth keeping in mind before ordering: what makes up the result, how the work proceeds, and what to look at in the finished item.
- Materials: kiln-dried solid wood and powder-coated profile tube set the character of the item and how it behaves in the room.
- Fit: a made-to-measure item fits the dimensions of the room, not the other way around — this is the main difference from ready-made standard solutions.
- Process: measurement, 3D design, production in the workshop and installation follow one another as consecutive steps, and each stage is clear in advance.
- Warranty: the terms for the item itself and for the hardware are specified separately, so it is worth reading them before signing the contract.
- Care: solid wood and metal last a long time with simple rules — no aggressive chemicals and no excess moisture.
- Check before ordering: verify three things — the material, the fit in the room and the warranty coverage — then the result will match your expectations.