Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
Employee workstations with acoustic partitions, cabinets and wardrobes along the office wall

For business · Offices

Staff furniture in Almaty

We design workstations to fit your office layout: free measurement and a 3D layout design within 1–2 days, the price is fixed in the contract. 24-month warranty on the item under the contract, we have been working since 2013.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 5 days
lead time
24 mo.
warranty under contract

Workstations with acoustic partitions and wardrobes along the wall

02Projects

Completed furniture projects for staff

Site, scope, materials and lead time — per project.

  • Bench system for the sales department open-space — MEBLIX project, Nurly Tau Business Center, Bostandyk districtOffice

    Bench system for the sales department open space

    Nurly Tau Business Center, Bostandyk district

    40 workstations on back-to-back bench systems with a unified finish: a shared cable tray in the center, divider screens between employees. Laid out according to the floor plan and assembled in one go.

    Scope
    40 workstations on bench systems, unified finish
    Materials
    25 mm laminated chipboard, frame, cable trays
    Lead time
    16 days
    Need the same
  • Call center workstations with acoustics — MEBLIX project, Prime Plaza Business Center, Auezov districtOffice

    Call center workstations with acoustic screens

    Prime Plaza Business Center, Auezov district

    Twenty-four call center workstations with acoustic screens on three sides: neighbors' voices don't interfere, and each has a headset shelf. Dense operator seating without extra noise.

    Scope
    24 workstations with screens on three sides
    Materials
    16 mm laminated chipboard, acoustic panels
    Lead time
    12 days
    Need the same
  • Operator desks for a bank branch — MEBLIX project, Esentai residential complex, Medeu districtOffice

    Operator desks for a bank branch

    Esentai Residential Complex, Medeu district

    Eighteen operator workstations with full cable management: trays, grommets and vertical channels in the supports. Only monitors on the desks — wires are fully hidden.

    Scope
    18 operator workstations, cable management
    Materials
    16/25 mm laminated chipboard
    Lead time
    11 days
    Need the same
  • Height-adjustable desks for an IT team — MEBLIX project, Dostyk Business Center, Medeu districtOffice

    Height-adjustable desks for the IT team

    Dostyk Business Center, Medeu district

    Twelve workstations with electric height adjustment for the IT team: a button moves the desk from sitting to standing, with memory for 4 heights for different developers.

    Scope
    12 sit-stand desks, electric drive
    Materials
    25 mm laminated chipboard, electric drive
    Lead time
    13 days
    Need the same
  • Staff reception desks in a clinic — MEBLIX project, Samal microdistrict, Medeu districtOffice

    Reception workstations for clinic staff

    Samal microdistrict, Medeu district

    Three administrator workstations in a clinic: a neat barrier on the patient side, a work surface, a niche and drawers for cards and documents on the staff side.

    Scope
    3 reception desks for staff with a barrier
    Materials
    25 mm laminated chipboard, milling
    Lead time
    10 days
    Need the same
  • Corner workstations and cabinets for a design bureau — MEBLIX project, Alatau Business Center, Auezov districtOffice

    Corner workstations and cabinets for a design bureau

    Alatau Business Center, Auezov district

    Sixteen corner workstations with add-on cabinets for a design bureau: an L-shaped worktop for two monitors and drawings, three drawers flush with the desk. Unified finish throughout the floor.

    Scope
    16 corner desks with add-on cabinets
    Materials
    16 mm laminated chipboard, Boyard slides
    Lead time
    12 days
    Need the same

03How we work with offices

How ordering staff furniture works

Book a measurement specialist for the office
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 5 days

    Production

    In the workshop we cut laminated chipboard, edge the ends with 2 mm PVC, paint MDF and assemble the item with a test assembly before shipping. Lead times for each option are in the price list on this page; rush orders are possible.

  5. 05

    1 day

    Delivery and installation

    We deliver, bring in, assemble, position and adjust the furniture. After installation we clean up.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

04Prices

How much custom staff furniture costs

The "from" price is for the item in the basic configuration: carcass and worktop made of laminated chipboard, PVC edge, hardware. The final cost is fixed in the contract after a free measurement and approval of the 3D design.

  • 50% prepayment, the rest after installation and sign-off
  • Kaspi, card, cash, bank transfer for companies
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • Operator desk "Operator"16 mm laminated chipboard, metal framefrom 5 daysfrom 26 000 ₸
  • Straight work desk "Standard"16 mm laminated chipboard, metal framefrom 5 daysfrom 30 000 ₸
  • Desk with cable management "Cable"16/25 mm laminated chipboardfrom 6 daysfrom 34 000 ₸
  • Corner work desk "Corner"16 mm laminated chipboard, metal framefrom 6 daysfrom 38 000 ₸
  • Call center desk “Call”16 mm laminated chipboard, acoustic panelsfrom 7 daysfrom 40 000 ₸
  • Desk with a screen partition “Barrier”16 mm laminated chipboard, fabric screenfrom 7 daysfrom 42 000 ₸
  • Desk with an attached cabinet “Tandem”16 mm laminated chipboard, Boyard slidesfrom 7 daysfrom 46 000 ₸
  • Set “Desk + cabinet”16 mm laminated chipboard, castersfrom 7 daysfrom 52 000 ₸
  • Staff reception desk “Front desk”25 mm laminated chipboard, millingfrom 9 daysfrom 58 000 ₸
  • Desk with built-in sockets “Hub”16 mm laminated chipboard, metal frame, built-in unit with 3 sockets + 2 USBfrom 6 daysfrom 58 000 ₸
  • Bench system “Duo” for 2 seats25 mm laminated chipboard, shared framefrom 9 daysfrom 62 000 ₸
  • Desk with an acoustic partition “Quiet”16 mm laminated chipboard, acoustic panel made of PET felt, metal framefrom 8 daysfrom 68 000 ₸
  • Height-adjustable desk “Lift”25 mm laminated chipboard, electric drivefrom 10 daysfrom 95 000 ₸
  • Bench system “Quadro” for 4 seats25 mm laminated chipboard, shared framefrom 11 daysfrom 118 000 ₸
  • Bench system “Hexa” for 6 seats25 mm laminated chipboard, reinforced framefrom 13 daysfrom 168 000 ₸

05For legal entities

We supply staff furniture to businesses with contract and invoice

We work with LLPs and sole proprietors on bank transfer. Price, materials and lead times are in the contract before production starts.

Request a contract and invoice
  1. 01Contractprice, materials, lead times and installation date — before we start
  2. 02Estimate and 3D designfree, within 1–2 days after measurement
  3. 03Invoice for paymentbank transfer for LLPs and sole proprietors
  4. 04Closing documentsacceptance certificate and delivery note after installation
50%
down payment, the balance — after the acceptance certificate
Bank transfer
for LLPs and sole proprietors; for private clients — card and cash
24 mo.
warranty on items per the contract
Set
from one workstation to a whole floor — one estimate and one contract
Repeat order
in the same Egger or Kronospan finish later

06Principles

Why a custom project beats ready-made sets

  1. 01

    A desk for height and task

    We select height and dimensions for the employee's seating and type of work: at an operator desk compactness matters, at a corner desk — space for two monitors and documents.

  2. 02

    Screen height and material for the task

    We select screens by task: taller and denser for dust and neighbor's glances, with sound-absorbing filling for acoustics in the call zone. Material and height are confirmed at the measurement.

  3. 03

    Ergonomics of the workstation

    Countertop depth for the monitor and keyboard, free movement of the chair, frame height with adjustable supports — we check these parameters at the project stage so that seating is comfortable.

  4. 04

    Matching the decor to the lighting and floor

    We match the laminated chipboard decor to the office lighting and flooring so that the batch reads evenly in different zones: the shade is perceived differently by the window and deep inside the room.

  5. 05

    Reserve of workstations

    We allow for free floor area and socket points for future headcount growth, so that adding workstations does not require re-planning and re-laying cable routes.

  6. 06

    Mounting of the frame and cable ducts

    The method of fixing the frame and cable ducts to the floor and walls depends on the substrate at the site. Ask the specialist during the measurement which fasteners and routes will suit your premises.

A stack of Egger and Kronospan laminated chipboard sheets in our workshop warehouse before cutting for office furnitureA CNC machine cuts a laminated chipboard sheet into office furniture parts according to drawingsAn edgebanding machine seals the ends of parts with PVC edge in the MEBLIX workshop in AlmatyA craftsman applies enamel to MDF fronts in the spray booth of our workshopA craftsman checks the test assembly of an item in the workshop before sending it to the customer's officeThe finished item — a desk with a screen partition — after assembly in the customer's office

01 / 06

07Production

How production works in our workshop

Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.

  1. A stack of Egger and Kronospan laminated chipboard sheets in our workshop warehouse before cutting for office furniture
    01

    Egger · Kronospan · E1

    Board

    Egger and Kronospan boards of emission class E1 arrive at the workshop warehouse. There are 40+ laminated chipboard decors, thickness 16–18 mm. Class E1 — for offices and cabinets.

  2. A CNC machine cuts a laminated chipboard sheet into office furniture parts according to drawings
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the drawings, and the machine cuts the board to them. Dimensions come from a laser measurement accurate to 1 mm.

  3. An edgebanding machine seals the ends of parts with PVC edge in the MEBLIX workshop in Almaty
    03

    Blum · Hettich · Boyard

    Edging and drilling

    The edge-banding machine seals the edges, then we drill holes for Blum hinges and Hettich runners.

  4. A craftsman applies enamel to MDF fronts in the spray booth of our workshop
    04

    Any RAL colour

    Enamel and veneer

    A finishing specialist paints the fronts to RAL — matte and gloss. For desks, a control assembly matters: we join the frame, countertop and cable ducts at the workshop before shipping, so that parts don't need adjusting on site.

  5. A craftsman checks the test assembly of an item in the workshop before sending it to the customer's office
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the modules in the workshop before dispatch, checking front gaps and drawer travel. The quality control department signs the item off for shipping.

  6. The finished item — a desk with a screen partition — after assembly in the customer's office
    06

    Installation to fit the office schedule

    Finished item

    We deliver, bring in, assemble in 1 day, adjust the furniture and clean up after ourselves. From signing the acceptance act — a 24-month warranty.

08Team

Who works on your office project

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

09FAQ

FAQ about office workstations

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01How do I place an order for staff desks from a LLP or sole proprietor?

For legal entities we draw up a contract and issue an invoice for bank transfer. 50 % prepayment, the balance — after signing the acceptance act. Closing documents: the act and the delivery note. To get started, leave a request — the manager will agree on the package contents and prepare an estimate.

02What documents will I receive after the work desks are installed?

After installation we sign the acceptance act, with the delivery note attached. These are the closing documents for accounting. The balance is paid after signing the act.

03Where do you deliver work desks for employees?

We deliver across Almaty and within a 30 km radius — free for a large order, the threshold is stated on the Delivery and payment page. Beyond 30 km — for an extra charge. Delivery and installation are handled by our own team, we agree the time to fit the office's working hours.

04What warranty do you provide on staff work desks?

The item carries a 24-month warranty under the contract. Blum hardware has a 25-year manufacturer's warranty; for Hettich and Boyard the terms differ — ask when choosing the configuration.

05Can I cancel or reschedule the office measurement?

Measurement is free, we agree the time by phone or on WhatsApp. If the office plans have changed, reschedule the visit in advance — the specialist will come on the new date. We prepare the 3D design in 1–2 days.

06What load can the work desk top withstand?

A 22–25 mm laminated chipboard countertop is designed for a monitor, equipment and documents at one workstation. Heavy equipment and archives are better placed on separate cabinets and wardrobes. Ask the specialist about the exact load for your equipment.

07Do you make rattan furniture for the office?

Yes, we make rattan furniture. For staff workstations, laminated chipboard and a steel frame are more often chosen; rattan suits waiting areas and lounge parts of the office. Discuss the task with the manager during the measurement.

08How long does it take to make a set of staff desks?

Lead times depend on the chosen model and material — see the price list on this page. A rush order is possible; we fix the date in the contract after agreeing the configuration.

09Can I order staff furniture wholesale for several floors?

Yes, we fit out offices entirely: a single workstation or a whole floor in a unified decor — with no mismatch in shades and hardware. For such a volume we prepare a single estimate and one contract, and later you can order more desks in the same material.

10Where can I see samples of materials and hardware for work desks?

Samples of Egger and Kronospan laminated chipboard, edging, frames and hardware can be seen in the showroom in Almaty. It's best to book in advance by email or on WhatsApp.

10Reviews

Reviews of furniture for staff

4,9

average rating
on Google and Zoon

See all reviews

11Article

Custom staff furniture in Almaty from the MEBLIX workshop

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

MEBLIX manufactures staff furniture in Almaty at its own production facility: work tables, mobile cabinets and wardrobes to the dimensions of a specific office. Measurement and a 3D layout project are free and take 1–2 days, installation is handled by our own team, and the item comes with a 24-month warranty under the contract.

What a staff furniture set includes at an employee's workplace

An employee's work area is not just a single countertop but a set of items that must match in decor and dimensions. We break down what such a set consists of and how to order it as a whole.

What makes up a single workplace

  • Work surface: a computer model with enough depth for a monitor, keyboard and papers, on legs or a steel frame.
  • Mobile cabinet: lockable storage for personal items and documents, on casters so it rolls under the countertop.
  • Document wardrobe: vertical storage for folders and outerwear if the department has no shared cloakroom.
  • Cable channels and grommets: hidden routing from the monitor and PC tower to the sockets, with no dangling loops.
  • Locks: securing drawers when workstations are in a densely seated open space.

A set for the sales department with a meeting area

For the sales department we equip managers' workstations with identical work surfaces and cabinets, and separate the meeting area with partitions and a differently configured model in the same decor. Such a set is full-fledged staff furniture where all items match in decor and dimensions. We assemble the open space on a powder-coated steel frame with adjustable feet to level the surfaces on an uneven floor. Partitions between managers reduce noise but take up part of the width of each workstation — this is factored into the 3D layout project before measurement, not after. We assemble the meeting area from a table for larger seating and the same document wardrobes so the whole department reads as one space. Our team handles installation, and we agree the time around the office's working hours. Reordering a single item later almost always lands in a different decor shade — even with the same laminated chipboard article — so we lock the entire set into one estimate and one contract upfront.

Table of workplace configuration options

sets of items for different employee tasks
OptionCompositionBest for
Basic workstationTable and mobile cabinetEmployee at a computer
Workstation with storageTable, cabinet, document wardrobeDepartment with paper document flow
Workstation with cable managementTable with cable channels and grommets, lockable cabinetDensely seated open space
Workstation on a steel frameTable on a powder-coated frame with adjustable feetPremises with uneven floors

Materials and hardware for office staff furniture

Material specifications determine how a table withstands daily computer work. We show the thicknesses, edge banding and hardware we use in the workshop and explain which of these really matters.

Laminated chipboard, carcass and countertop thicknesses

We make carcasses and countertops from E1-class Egger and Kronospan laminated chipboard: carcass 16–18 mm, countertop 22–25 mm, 2 mm PVC edge banding. These items are built for long daily use, so a 22–25 mm countertop thickness matters more than looks: on a thin board, a monitor and a resting elbow eventually cause noticeable sagging, while a 25 mm surface keeps its shape for years. We use Egger and Kronospan boards with a melamine finish — it withstands damp cleaning and coffee spilled by the keyboard. We glue 2 mm PVC edge banding around the entire perimeter, including the inner cutouts for cable ducts. 2 mm PVC edge banding, not 0.4 mm, protects the end face from chips and moisture — it is the thin edge that most often swells on desks under intensive use.

Steel frame or laminated chipboard supports

We recommend desks on a powder-coated steel frame with adjustable supports for open-plan offices, where desks are often moved and the floor is uneven. Powder-coated steel does not chip when moved and withstands damp cleaning, while laminated chipboard supports are cheaper and suitable where the desk stays in place — in offices and quiet zones. We assemble office desks for staff on adjustable supports: they screw out in height and adapt to screed and tiles. Adjustable supports compensate for floor unevenness of up to several millimeters — without them the desk wobbles and the employee slips paper under a leg. For workplaces this is no small thing: a wobbling desk loosens the fasteners, and play appears where the frame meets the top.

Blum, Hettich and Boyard hardware in cabinets and wardrobes

  • Blum: hinges, lift mechanisms and drawer runners — this hardware carries a 25-year manufacturer's warranty under the contract.
  • Hettich and Boyard: we fit them to cabinets and wardrobes in projects that need a different balance of budget and mechanics.
  • Locks: we fit locks to staff cabinets and wardrobes — employees lock personal belongings and documents with a key.
  • Cable ducts and grommets: we route monitor and charger cables through the countertop so no tangle lies on the surface.

Material parameters table

material parameters by furniture element
ElementMaterialParameter
CarcassEgger or Kronospan laminated chipboard16–18 mm
CountertopEgger or Kronospan laminated chipboard22–25 mm
End facesPVC edge banding2 mm
Selected itemsEnameled MDFper project
Selected itemsNatural veneerper project
Rattan lineRattanper project

Sizes, measurement and production of staff furniture for your office

A size mistake is the most expensive one when ordering furniture: the desk will not fit through the doorway or will hit a column. We show which dimensions are comfortable at the computer and how the measurement goes with a layout plan.

Comfortable desk dimensions at the computer

For computer work, a countertop depth of at least 60 cm and a width of at least 120 cm per person is comfortable, so that the monitor, keyboard and documents do not crowd each other. With a width of 140–160 cm, two monitors, a paper tray and a laptop stand fit without overhanging the edge. A work surface height of 74–76 cm suits most employees of average height; for those taller than 185 cm, it is reasonable to raise the countertop by 2–3 cm. The compartment for the system unit takes up 20–25 cm of width and requires ventilation gaps of at least 5 cm at the back and sides. Keyboard shelves lower the work plane by 8–10 cm below the main countertop — this frees up space for office equipment, but the shelf extension should not hit the knees. Office furniture for employees is designed with these dimensions in mind so that every workstation is comfortable throughout the day.

How measurement and 3D layout design work

  • Room measurement: a technician measures the length and width of the walls, the height of window sills, column protrusions and niches — these are used to calculate how many workstations will fit.
  • Utility mapping: on the plan we mark sockets, ventilation outlets and radiators so that desks do not block access to them.
  • Layout design: in 3D we show the position of each desk, cabinet and wardrobe with aisles between rows.
  • Approval and launch: we make changes before signing, then fix the dimensions in the contract and send the cutting plan to the workshop.

Ready-made desks or custom-sized manufacturing

We manufacture to the dimensions of a specific office — this wins where ready-made desks do not fit into a niche or do not match the decor of the rest of the setting. A standard model 120 or 140 cm wide rarely covers a niche 68 cm deep: gaps and awkward passages remain. For custom manufacturing, the countertop is cut from a sheet of Egger or Kronospan E1 class laminated chipboard 22–25 mm thick, the carcass is assembled from 16–18 mm boards with 2 mm PVC edge banding, and the steel frame with powder coating gets the required length without extensions. Non-standard width does not make the item more expensive if it fits into the cutting plan of a laminated chipboard sheet without much waste. Before launch, check the countertop decor against the cabinets already in place — reordering in the same decor later is possible, but matching a shade from a photo is harder than from a sample in the showroom.

How staff furniture differs from an executive office

Staff furniture and an executive office solve different tasks — one workstation is replicated across the whole department, the other is made as a one-off. Let us break down the differences in configuration, materials and zoning.

Tasks and configuration of the two zones

Employee workstations are designed for replicating identical places, while an executive office is a one-off item with a different configuration and finish. In the staff zone, one module is repeated: a desk, a mobile cabinet, a document wardrobe, and then the set is copied according to the number of places in the department. An executive office is assembled as a separate ensemble — a desk with an enlarged countertop, a meeting extension, a lockable cabinet, a wardrobe for folders and personal items. The difference in materials is even more noticeable: for workstations, Egger and Kronospan E1 class laminated chipboard is used, while in the office, MDF in enamel and natural veneer are more often used. Mixing these materials in one room without a design project is risky in terms of style. If the decors are selected from samples of one collection, enamel and melamine read as a single line, but a random juxtaposition of warm veneer and cold laminated chipboard gives away a mismatch.

Partitions and zoning of workstations

We include partitions between managers' workstations in the layout plan to separate the open space from the meeting area in a single finish. The height of a partition sets the working scenario: a screen at countertop level hides wires and papers but keeps the view open, while a panel above the eye level of a seated employee cuts off noise from the meeting area. In the 3D layout you can see how the partitions will sit relative to windows, walkways and columns — this is the stage where we agree on the configuration. We supply orders from a single workstation up to a whole office floor in one finish, so the partitions come with the same edge banding and colour as the desks. A partition above the eye level of a seated employee gives privacy but worsens visibility — in open spaces, low partitions at countertop level are more common. For a sales department with a meeting area, it makes sense to combine both types: low screens in the general seating and high panels by the meeting zone.

A single finish for the whole floor

We supply orders from a single workstation up to a whole office floor in one finish and accept repeat orders in the same finish later. One contract and one estimate for the whole set simplify approval: there is no need to reconcile deliveries from different contractors and compare shades across different samples. A repeat order in the same finish is possible, but a batch of laminated chipboard from a different production run may differ in shade — so it is better to cover a large order with a single material delivery. Our 600 m² workshop in Almaty handles cutting, 2 mm PVC edge banding and trial assembly, so we run a batch of one finish in full and do not mix production runs. Before starting a large project, it is worth building a reserve for repeat orders into the estimate right away — that is cheaper than later hunting for a board of the right shade from another batch.

How to order staff desks for an LLP and take delivery

For LLPs and sole proprietors, ordering furniture also means paperwork. We show the path from measurement to the acceptance certificate and closing documents.

Order stages from measurement to installation

  • Measurement and 3D design: we visit the office free of charge and prepare the workstation layout within 1–2 days.
  • Contract and invoice: we fix the specification of items and issue an invoice for bank transfer to legal entities.
  • 50 % prepayment: starts production in our 600 m² workshop with chipboard cutting and 2 mm PVC edge banding.
  • Installation: delivery and assembly are handled by our own team, and we agree the time around the office's working schedule.
  • Certificate and balance: you pay the remaining 50 % when signing the acceptance certificate, and receive the closing documents at the same time.

Documents for LLPs and sole proprietors by bank transfer

For legal entities we work under a contract and invoice with bank transfer, and we issue the closing documents — the acceptance certificate and the delivery note — once installation is complete. The contract lists every item in the set: desks on a powder-coated steel frame, lockable cabinets, wardrobes, cable ducts and cable grommets. Such an office furniture set for staff is convenient to accept and put on the books as a single transaction. One estimate and one contract cover an order from a single workstation up to a whole office floor in a single finish, while a repeat order in the same finish later is processed as a separate transaction without reassembling the rest. We handle wholesale and complete orders the same way as small ones. A contract with a fixed specification of items simplifies putting the order on the books — it is easier for accounting to match the delivery note with the order, so check the item codes and quantities in the annex to the contract before signing.

How to check quality before acceptance

  • 2 mm PVC edge banding: check along the perimeter of countertops and carcasses that there are no chips, peeling or burrs on the ends.
  • Hardware: open and close every door and drawer, check the smooth operation of Blum, Hettich or Boyard runners and that the locks work.
  • Joints and alignment: make sure the countertops sit without skewing, the adjustable supports are set, and the cable ducts fit into their slots.
  • Completeness: check the number of items against the delivery note before signing the acceptance form — it is easier to resolve a shortfall right away than later.

Installation in a working office and production lead times

An office rarely stops work to have furniture installed. Below is how we coordinate installation time, what production lead times depend on, and how delivery works within the city and beyond.

Installation to fit the office schedule

We install our products with our own team and coordinate the installation time to fit the office schedule so that employees are not pulled out of their workflow. The team arrives at the start of a shift, during the lunch window or after closing — whichever suits a particular department. We assemble the sets for employees on site from ready-made modules: the carcasses arrive pre-assembled and numbered according to the layout from the 3D design, so the team does not waste time looking for parts. Zone-by-zone installation — first one row of workstations, then the next — lets employees move over as sections become ready, without the whole floor standing idle. This approach is convenient when you need furniture for staff in an office and cannot stop work for installation. A ready layout speeds up installation compared with assembling from scratch according to a drawing — this margin is worth allowing for if the office works without days off.

What production lead times depend on

Production lead times depend on the item and the material, and the exact values for each option are given in the price list on this page; a rush order is possible. Carcasses and countertops made of Egger and Kronospan laminated chipboard follow the workshop's established route: cutting, edge banding with 2 mm PVC, drilling and a test assembly. Tables on a powder-coated steel frame add a metal coating cycle, and MDF in enamel for offices adds several coats with drying in between. A rush order can realistically be sped up if the items fit the standard laminated chipboard cutting plan — custom MDF painting always adds a finishing cycle. That is why a staff set made of laminated chipboard is quicker to produce than the same set with enamel fronts: when planning a department move, allow extra time for the finishing cycles, not for assembly.

Delivery in Almaty and beyond the city

Delivery in Almaty and up to 30 km is free for a large order, beyond 30 km — for an extra charge; the large-order threshold is stated on the Delivery and payment page. We transport products in rigid packaging with edge protectors, because 2 mm PVC edge banding is the most vulnerable spot in transit. We unload and carry everything in with the same team that later assembles it: parts do not pass between contractors and the module numbering does not get mixed up. Within the city and to the near suburbs we deliver by one vehicle with installation on the same day. A large order is delivered by one vehicle with installation on the same day — less risk of damaging the edge banding during repeated loading. If the office is in a remote area beyond 30 km, we agree the extra charge and delivery time in advance, before signing the contract.

The bottom line on staff furniture

We have put together five points that determine the outcome when ordering furniture for staff: completeness of the set, material specifications, production format, documents and installation arrangements.

  • A complete set: a workplace is assembled from a desk, cabinet, wardrobe and cable management in a single finish, rather than pieced together from separate items.
  • Specifications instead of adjectives: a 16–18 mm carcass, 22–25 mm worktop and 2 mm PVC edge say more about durability than the word “quality”.
  • Made to measure: it wins where a ready-made desk does not fit into a niche or clashes with the finish of the rest of the floor.
  • The legal entity route: contract, invoice, prepayment, installation and acceptance certificate with closing documents — with no intermediaries.
  • Installation and verification: work is planned around the schedule of a working office, and lead times and prices are checked against the page price list, not from memory.

12Calculation

How to calculate the cost of furniture for staff

Select the workstation type and number of seats in the calculator — the calculation will go to the manager on WhatsApp, who will clarify the decor and configuration.

01Type
02Quantity, pcs of identical items
1 pc
130 pcs
03Carcass
04Fronts
05Hardware
06Options

13Office furniture

What else we make besides staff furniture

Office furniture

We design and make cabinet furniture for offices, precisely fitted to the space and with a single decor throughout the floor.

Office desks

We design workstations to suit the office layout and employees' tasks: measurement and a 3D layout design are free, and the price is fixed in the contract before work starts.

Office wardrobes

We design and make office wardrobes for your documents, equipment and clothing, fitted into a niche and with the required number of sections.

Document wardrobes

We will make a wardrobe to the dimensions of your archive or office: free office measurement and a 3D layout design in 1–2 days, with the price fixed in the contract.

Clothing wardrobes

A wardrobe fitted into a niche in the reception or changing room keeps things tidy and protects employees' clothing from dust.

Office cabinets

We will make cabinets to suit your desk and tasks: with a lock, for office equipment or for filing.

Office sofas

We design and make sofas for receptions, waiting areas and meeting rooms: free measurement with fabric samples and a 3D design in 1–2 days, with the price fixed in the contract.

Executive office

We design and manufacture an executive office to suit the manager's needs: meetings, document storage, a relaxation area.

Executive desk

We design and make a desk for the director's office with free measurement and a 3D layout design in 1–2 days.

Desk with a meeting extension

An executive desk with a briefing extension brings the meeting and the workplace into one line without taking up extra space.

Meeting tables

We design and make tables for meeting rooms to the dimensions of your room.

Reception furniture

We furnish the reception to the dimensions of your office: a counter, sofas, tables and a wardrobe in a single decor.

Loft office furniture

We furnish the office in a single decor: workstations, meeting rooms, reception and relaxation areas.

Loft tables

A loft table on a steel frame with a wooden or laminated chipboard top solves the workstation task without losing the office style.