Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
Office lounge area with a coffee table on a black metal frame between light-colored sofas

For business · Offices

Office coffee tables in Almaty

We make coffee and side tables to fit the sofa and armchairs in the waiting area, the lounge by the reception, the meeting room and the office — in the same finish as the office furniture. Measurement and 3D design are free, the price is fixed in the contract, and the item comes with a 24-month warranty.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 6 days
minimum lead time
24 mo.
item warranty

Lounge area: coffee table on a black metal frame between sofas

02Projects

Completed office coffee table projects

Scope, materials and lead time — for each project.

  • Tables for the reception waiting area — MEBLIX project, Nurly Tau Business Center, Bostandyk districtOffice

    Tables for the reception waiting area

    Nurly Tau Business Center, Bostandyk district

    Three coffee tables for the waiting area by the reception: a large one in the center of the soft seating group and two side tables by the armchairs. A single finish to match the reception desk, with space for water and guest catalogs.

    Scope
    3 coffee tables for the soft seating group, single finish
    Materials
    25 mm laminated chipboard, metal frame
    Lead time
    9 days
    I want the same
  • Round tables for meeting rooms — MEBLIX project, Esentai residential complex, Medeu districtOffice

    Round tables for meeting rooms

    Esentai Residential Complex, Medeu district

    Five round coffee tables for small meeting rooms: no sharp corners, on a central pedestal so participants have room for their legs. The finish was matched to the meeting tables.

    Scope
    5 round tables without sharp corners
    Materials
    25 mm laminated chipboard, column base
    Lead time
    10 days
    I want the same
  • Tables for the lobby lounge area — MEBLIX project, Dostyk Business Center, Medeu districtOffice

    Tables for the lobby lounge area

    Dostyk Business Center, Medeu district

    “Table plus two side tables” sets for four lobby lounge areas: the small tables slide under the central one and pull out toward the armchairs when guests arrive. One finish for the whole order.

    Scope
    table + 2 side tables sets, 4 zones
    Materials
    25 mm laminated chipboard, metal frame
    Lead time
    12 days
    I want the same
  • Glass tables for executive offices — MEBLIX project, Mega Tower residential complex, Bostandyk districtOffice

    Glass tables for executive offices

    Mega Tower Residential Complex, Bostandyk district

    Two coffee tables with tempered glass tops on a black metal frame for the rest areas of executive offices. A light, presentable look next to the sofa and armchairs.

    Scope
    2 tables with glass on a black frame
    Materials
    8 mm tempered glass, metal
    Lead time
    13 days
    I want the same
  • Tables for the meeting room — MEBLIX project, Gagarinsky Business Center, Almaly districtOffice

    Tables for the meeting room

    Gagarinsky Business Center, Almaly district

    Two coffee tables made of natural oak veneer for a representative meeting room, in the same tone as the large meeting table. Warm wood texture under protective lacquer.

    Scope
    2 oak veneer tables to match the table
    Materials
    MDF + natural veneer, metal
    Lead time
    12 days
    I want the same
  • Loft tables for the coworking space — MEBLIX project, Alatau Business Center, Auezov districtOffice

    Loft tables for the coworking space

    Alatau Business Center, Auezov district

    Eight loft-style coffee tables for an open coworking space: black metal frame and a wood-look tabletop. A single style across all lounge spots, resistant to the flow of residents.

    Scope
    8 loft tables on black metal
    Materials
    Wood-look laminate, black metal
    Lead time
    11 days
    I want the same

03How we work with offices

How ordering works coffee table

Book a measurement specialist for the office
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 6 days

    Production

    In the workshop we cut 25 mm laminated chipboard, edge the ends, weld and paint the frame, cut in the socket hatch and assemble the table completely. Lead time for each model is in the price list above.

  5. 05

    1 day

    Delivery and installation

    We deliver, bring in, assemble, set up and adjust the furniture. After installation we clean up after ourselves.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

04Prices

Prices for custom office coffee tables made to order

The “from” price is for one table in the base size; for the “Triplet” set it is for a set of three. The final price depends on sizes, material and options; we fix the cost in the contract after a free measurement.

  • 50% prepayment, the rest after installation and sign-off
  • Kaspi, card, cash, bank transfer for companies
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • Side table for a sofa "Side"Laminated chipboard, metal framefrom 6 daysfrom 20 000 ₸
  • Square table "Quart"Laminated chipboardfrom 6 daysfrom 22 000 ₸
  • Rectangular table "Meet"Laminated chipboardfrom 7 daysfrom 24 000 ₸
  • Table on casters "Mobil"Laminated chipboard, castersfrom 6 daysfrom 25 000 ₸
  • Round table "Round"Laminated chipboard, column basefrom 7 daysfrom 26 000 ₸
  • Table with a lower shelf "Duo"Laminated chipboardfrom 7 daysfrom 27 000 ₸
  • Table on a metal frame "Karkas"Laminated chipboard, metal profilefrom 8 daysfrom 28 000 ₸
  • Oval table "Oval"Laminated chipboard, metal framefrom 8 daysfrom 30 000 ₸
  • Table for the reception lounge "Foyer"Laminated chipboard, metal framefrom 9 daysfrom 32 000 ₸
  • Loft table on black metal "Industry"laminate + solid wood, black metalfrom 9 daysfrom 34 000 ₸
  • Table with a glass top "Glass"tempered glass, metalfrom 10 daysfrom 38 000 ₸
  • Modular table "Module"Laminated chipboard, metal framefrom 10 daysfrom 40 000 ₸
  • Veneer table "Wooden"MDF + natural veneer, metalfrom 12 daysfrom 46 000 ₸
  • Set "Triplet"table and two side tables, laminated chipboard, metal framefrom 11 daysfrom 52 000 ₸
  • Executive table "Prestige"MDF in enamel or veneer, metalfrom 13 daysfrom 58 000 ₸

05For legal entities

We supply office coffee tables to businesses with contract and invoice

We work with LLPs and sole proprietors on bank transfer. Price, materials and lead times are in the contract before production starts.

Request a contract and invoice
  1. 01Contractprice, materials, lead times and installation date — before start
  2. 02Estimate and 3D designfree, within 1–2 days after measurement
  3. 03Invoice for paymentbank transfer for LLPs and sole traders
  4. 04Closing documentsacceptance certificate and delivery note after installation
50%
deposit, balance — after the acceptance certificate
Bank transfer
for LLPs and sole proprietors; for private clients — card and cash
24 mo.
warranty on items per the contract
Set
from a single workstation to a whole floor — one estimate and one contract
Repeat order
in the same Egger or Kronospan finish later

06Principles

Why a custom office coffee table is more convenient than a ready-made one

  1. 01

    Height to fit your sofa

    We set the tabletop height from the seat height of the soft furniture already in the waiting area, not from an average catalog model.

  2. 02

    Size to fit the niche and walkway

    We choose the length and shape based on the measurement so the table doesn’t block the path to the reception and fits into a niche, by a column or along a partition.

  3. 03

    Thick wear-resistant tabletop

    25 mm laminated chipboard with 2 mm PVC edge withstands cups, bags and daily cleaning, and on a long table it doesn’t sag under magazines.

  4. 04

    Stable base

    A powder-coated steel frame and adjustable supports level the table on tile, so it doesn’t wobble when someone leans on the edge.

  5. 05

    Power and lighting inside

    We cut a socket block with USB into the tabletop, route the cable along the base and cable channel, and hide the lighting in a profile with no visible points.

  6. 06

    Same decor as the office furniture

    The laminated chipboard decor and frame colour match the reception desk and work desks, and a follow-up order for a new floor is made later in the same colour.

A stack of Egger and Kronospan laminated chipboard sheets in our workshop's warehouse before cutting for office furnitureA CNC machine cuts a laminated chipboard sheet into office furniture parts according to the drawingsAn edgebanding machine seals the ends of parts with PVC edge banding in the MEBLIX workshop in AlmatyA craftsman coats MDF fronts with enamel in our workshop's spray boothA craftsman checks the test assembly of an item in the workshop before shipping it to the client's officeFinished round veneer coffee tables after delivery to the waiting area

01 / 06

07Production

How the tabletop and frame of the table go through our workshop

Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.

  1. A stack of Egger and Kronospan laminated chipboard sheets in our workshop's warehouse before cutting for office furniture
    01

    Egger · Kronospan · E1

    Board

    Egger and Kronospan boards of emission class E1 arrive at the workshop warehouse. There are 40+ laminated chipboard decors, 16–18 mm thick. Class E1 is for offices and cabinets.

  2. A CNC machine cuts a laminated chipboard sheet into office furniture parts according to the drawings
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the drawings, and the machine cuts the board to them. Dimensions come from a laser measurement accurate to 1 mm.

  3. An edgebanding machine seals the ends of parts with PVC edge banding in the MEBLIX workshop in Almaty
    03

    Blum · Hettich · Boyard

    Edging and drilling

    The edge-banding machine seals the edges, then we drill holes for Blum hinges and Hettich runners.

  4. A craftsman coats MDF fronts with enamel in our workshop's spray booth
    04

    Any RAL colour

    Enamel and veneer

    A finishing specialist paints the fronts to RAL — matte and gloss. The tabletop and the table frame are assembled together already in the workshop to check how the supports fit and that everything is level before delivery to the office.

  5. A craftsman checks the test assembly of an item in the workshop before shipping it to the client's office
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the modules in the workshop before dispatch, checking front gaps and drawer travel. The quality control department signs the item off for shipping.

  6. Finished round veneer coffee tables after delivery to the waiting area
    06

    Installation to fit the office schedule

    Finished item

    We deliver, bring in and assemble within 1 day, adjust the furniture and clean up after ourselves. The warranty is 24 months from signing the acceptance certificate.

08Team

Who will make a coffee table for your waiting area

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

09FAQ

Frequently asked questions about office coffee tables

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01Can I order just one coffee table?

Yes, we take on both a single table and a set for several zones. Measurement and a 3D design for a single item are also free. We will match the decor to the furniture already in your office.

02Can I order a coffee table to fit a niche?

Yes, we cut the tabletop to the order's dimensions: for a niche, a column, a curved sofa or the corner of a waiting area. The contour is finished with PVC edge banding along the entire edge. We show the shape in advance in the 3D design.

03How much does a side table for a sofa cost?

The Side side table on a metal frame and the square Quart for a pair of armchairs are the two basic models. The price depends on size, material and options such as sockets or lighting. All models and prices are in the price list on this page.

04How much does a set of one table and two side tables cost?

The Triplet set of a main table and two side tables is in the price list on this page. All three tables are made in the same decor and on the same frame. The exact amount is fixed in the contract after measurement.

05Is a glass coffee table suitable for a busy reception?

Yes, if the table stays in place and is not moved during cleaning. Tempered glass is stronger than ordinary glass and, when it breaks, produces small blunt shards. Where a table is constantly moved around, 25 mm laminated chipboard is more reliable.

06Can a socket and USB be built into a coffee table?

Yes, we cut a socket unit with USB under a flip-up cover into the tabletop. The cable is hidden in the frame support and cable channel so it does not lie across the walkway. We agree the cut-out position in the 3D design.

07Will you make a table to match the furniture already in the office?

Yes, we match the laminated chipboard decor and frame colour using samples and photos of your furniture. If we furnished the office, we take the decor from the previous contract. That way the table fits in with the reception interior.

08Do you make coffee tables in batches for several offices?

Yes, tables for several floors and branches are handled with one estimate and one contract with a LLP or sole proprietor. Payment is by bank transfer: 50 % prepayment, the rest after the acceptance certificate. Later you can order more tables in the same decor.

09When will the coffee table be ready?

Lead times for each model are in the price list on this page and depend on the material and options. Veneer tables and tables with lighting take longer than laminated chipboard ones. Rush orders are possible — discuss the date with the manager.

10What warranty comes with the coffee table?

The table comes with a 24-month warranty under the contract. Before dispatch, every item undergoes a test assembly in the workshop, and installation is carried out by our team. We sign the acceptance certificate after installation.

10Reviews

Reviews of office coffee tables

4,9

average rating
on Google and Zoon

See all reviews

11Article

Office coffee table by MEBLIX in Almaty, sized to your area

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

MEBLIX office coffee tables are made in our own workshop in Almaty to fit the sofa and armchairs of a waiting area, a lounge by the reception, a meeting room or an office. Countertops in 25 mm laminated chipboard, glass or veneer on a steel frame, in the same decor as the office. Free measurement and 3D design, 24-month warranty.

How to match an office coffee table to the sofa and armchairs

A table in a waiting area only works together with the upholstered furniture. Its height, length and distance to the seat decide whether a guest can comfortably set down a cup and walk past without trouble.

What height to make the table relative to the seat

We calculate the countertop height from the seat height of the sofa or armchairs: the table is set level with the seat or slightly lower, so a guest can pick up a cup without getting up or leaning over. Our office coffee tables are made to the dimensions of a specific area, so we set the height to match the upholstered furniture already in the reception room, not an average model from a catalog. A steel frame with adjustable feet lets the table sit level on uneven tiles and the height be fine-tuned on site. In an office with low lounge armchairs we lower the countertop even further, so the area looks calmer and does not block the view, and a guest does not bump their knees against the edge. Measure the seat height of the actual sofa with its cushions rather than taking the figure from the spec sheet: upholstered furniture sags slightly over time.

Countertop length and depth for a sofa

  • Length: the countertop is made shorter than the sofa, so there is room at the edges for legs and visitors' bags.
  • Depth: a guest sits an arm's length from the edge, so a table that is too deep is awkward for those sitting opposite.
  • Armchairs at the sides: for two armchairs flanking a sofa, a square table works, within reach of all three.
  • Corner sofa: instead of one large table, a main table plus a side table at the second armrest is more convenient.
  • Checking on site: lay cardboard on the floor in the size of the future countertop and sit on the sofa for a few minutes.

How much space to leave around the table

We check the distance from the sofa edge to the table and the width of the walkway in the 3D layout plan, which we prepare free of charge within 1–2 days after measuring the office. The plan shows where a visitor will walk from the entrance to the reception desk, where the coat rack will stand and whether a door will hit the corner of the table. Space is left between the seat and the countertop for legs, but not so much that one has to reach for a cup. In a narrow waiting area it is sometimes better to skip a central table and place side tables by each armchair, keeping the walkway clear. A rectangular table is turned with its long side along the sofa, not across the walkway. Mark the path from the entrance door to the reception on the plan: no table should block it, even if it looks better that way.

Which table shape to choose for a waiting area, lounge and office

The shape of the countertop determines how many guests can reach the table, how freely people move around it and how the table looks next to the upholstered furniture. Here is which shape suits each office area.

Table shape by office area

Matching table shape to zone purpose
Office zoneSuitable shapeWhy
Waiting area by the wallrectangularfollows the line of the sofa
Lounge by receptionround, ovalno corners in the walkway
Meeting room with armchairssquareequal access from all sides
Executive officerectangular, ovalpaired with the desk
Narrow waiting corridorside table by each armchairthe walkway stays clear
Open coffee areamodularadapts to the number of guests

When a custom shape is needed

We cut custom shapes to order size in our own workshop and seal the edges with 2 mm PVC edge banding around the entire perimeter, including curves. Custom office coffee tables are needed when the waiting area is built into a niche, wraps around a column, or follows the curve of the reception desk. A semicircular table by a radius sofa, a trapezoid in a corner zone, an elongated oval along a glass partition — all of these are made from the same 25 mm laminated chipboard as standard models, on the same steel frame. The more complex the outline, the more important it is to see it in a 3D design next to the soft furniture and walkways. Before ordering, cut a template out of cardboard and place it on the floor: within a couple of minutes it becomes clear whether the shape works for those sitting at it and walking past.

Table in the executive office

In the executive office we make the table in the same material as the desk and wardrobes: MDF in enamel and natural veneer on a metal base — the material is chosen to match the desk. Such a table stands in the informal meeting area where the executive has coffee with partners outside the meeting room, so it is more visible than in a general reception and should look more expensive. Veneer gives a lively wood grain, enamel gives a smooth solid color with no visible texture. The shape is most often rectangular or oval, and we select the dimensions for a pair of armchairs, and sometimes for a compact sofa. A lower shelf can be added to keep company catalogs and gift materials at hand. For meetings where documents and a laptop are placed on the table, make the top slightly higher than a standard coffee table — it is more comfortable to work at.

What materials office coffee tables are made from

Hot cups are left on the table, bags and folders are put down, and cleaning happens every day. That is why the top and base are chosen for load, not just for looks.

25 mm laminated chipboard with PVC edge banding

Our main material for tops is Egger and Kronospan laminated chipboard 25 mm thick: the melamine coating resists scratches from keys, wet cleaning and cup marks better than a painted surface. We seal the edges with 2 mm PVC edge banding on a machine in the workshop, so water after cleaning does not get into the board and the edge does not swell. A thick top is visually heavier and more reliable than a thin one, and on a long table it does not sag under a stack of magazines. Decors range from light wood to concrete and solid colors — we match them to the rest of the office furniture, and take the edge banding in exactly the same tone. Laminated chipboard suits high-traffic areas: receptions, coworking spaces, waiting areas in clinics and banks. In a waiting area, choose a matte decor of medium lightness — hand and mug marks are less noticeable on it.

Glass, veneer and loft on metal

  • Tempered glass: the tabletop looks light and doesn't clutter a small area, and a glass coffee table for the office suits bright interiors.
  • Glass safety: tempered glass is stronger than regular glass and, when broken, shatters into small blunt fragments.
  • Natural veneer: MDF with veneer gives the pattern of real wood, so such models are placed in executive offices.
  • Loft on metal: laminate and solid wood on a black metal frame support an office interior in an industrial style.
  • Veneer in the reception area: a veneered tabletop requires coasters under cups, but over the years it acquires a deeper shade.
  • Where to place glass: choose it where the table isn't moved and heavy bags aren't placed on it.

Table base and stability

Base types and their use in the office
Base typeStabilityWhere it fits
Profile metal framehigh, doesn't wobblereception areas with heavy foot traffic
Column supportgood on round tableslounge by the reception
Casters with a stopperlocks in placemeeting rooms and coffee areas
Carcass with a lower shelfhigh, heavy bottomareas with brochures and press
Adjustable supportslevel the table on tileold floors and uneven surfaces

Side, mobile and modular tables in the office

One table in the center isn't enough where guests sit along a long wall and the waiting area changes for an event, a presentation or a reception. That's where side, mobile and modular options help.

A set of a main table and side tables

We make the "table + 2 side tables" set in the same decor and on the same type of frame, so the three tables look like a well-thought-out group rather than a random assortment. The main coffee table for the office is placed in front of the sofa, and the side tables by the armrests and beside the armchairs on the sides, so every guest has somewhere to put a cup and a phone. A side table is smaller and lighter, and it can be moved to an armchair in another part of the area without the help of the facilities manager. Such a set is convenient in reception areas where visitors sit both on the sofa and in separate armchairs. Side models can also be ordered separately if you already have a main table — we'll match the same decor to it. Make the height of the side table level with the armrest or slightly higher — then a cup is placed without lowering the hand.

A table on casters in the meeting room

A table on casters with a stopper is rolled to wherever it's needed right now: to the armchairs at a meeting, to the wall during cleaning, to the next room for an event. In the meeting room, coffee, water and handouts are placed on such a table without occupying the main conference table. The stopper locks the casters, so the mobile table doesn't roll away when someone leans on it. The tabletop is made of the same 25 mm laminated chipboard as the stationary models and holds a tray with dishes. In the staff coffee area, the mobile table is moved to the wall after lunch to free up the passage. Choose casters with a soft rim if the office has laminate or tile: they leave no marks and roll more quietly.

Modular tables and the lower shelf

  • Modules in a row: modular tables are lined up along a long sofa and brought together into one large table for events.
  • Modules apart: each module works on its own, so the waiting area is easy to rearrange when office furniture is moved.
  • Lower shelf: the second tier clears magazines, company catalogs and brochures off the tabletop, leaving room for cups.
  • Heavy base: the shelf makes the structure more stable, and the table does not tip over if someone leans on the edge.
  • Rule of choice: if printed materials sit on the table, order the version with a shelf, otherwise the tabletop quickly turns into a display stand.

Sockets, USB and lighting in office coffee tables

Waiting guests charge their phones and laptops, while staff hold short meetings at the table. Power built right into the table does away with extension cords on the floor and cables across the walkway.

Socket and USB unit in the tabletop

A socket unit with USB ports can be cut into the tabletop, and we route its cable through a cable channel along the frame support so it does not dangle under the table. A lid with a cover closes the unit when charging is not needed, and the tabletop stays flat: cups are set on it and papers laid down. We choose the cut-in spot in the 3D design so that the port is within reach of guests both from the sofa and from the armchairs. Most often such a table is placed in waiting areas of banks, clinics, car showrooms and coworking spaces, where visitors sit for a long time. A metal frame with a hollow profile is convenient because the cable runs inside the support and is not visible at all. Decide where the power socket will be, in the wall or perhaps in the floor, before the measurement: this determines which side of the table the cable will run from.

Table lighting in the lounge

LED lighting under frosted glass or along the lower edge makes the table the focal point of the lounge by the reception, especially in the evening when the general light is dimmed. We build the carcass of such a table from MDF and hide the LED strip in a profile so the guest sees an even glow without dots. An office coffee table with lighting works well in showrooms, dealerships and reception rooms, where the visitor's first impression matters. We route the lighting power the same way as the socket cable, along the support and cable channel, with no exposed wires under the tabletop. The switch can be brought out to the end face or connected to the general lighting of the area. Match the glow color with the rest of the reception lighting: warm lighting next to cool ceiling fixtures looks accidental.

What to check in a table with power

  • Unit cover: closes flush with the tabletop and does not get in the way of setting a cup or laptop next to the ports.
  • Cable: runs inside the support or along the cable channel and does not lie on the floor in the visitor walkway.
  • Stability: a table with a cable is not moved during cleaning, so it has fixed supports rather than casters.
  • Access to ports: sockets are within reach of guests from the sofa and armchairs, not just the person sitting nearby.
  • Main rule: no cable should cross the walkway, even if that would make connecting the table easier.

How to fit the tables into the overall decor and keep their look

Every visitor sees the table. It must match the rest of the furniture in color, withstand the flow of guests and look the same years later as on the day it was installed.

Matching the decor to office furniture

We select office coffee tables based on Egger and Kronospan laminated chipboard samples and the frame colour of the furniture already in the reception area: reception desks, wardrobes, work desks. The showroom has decor samples, and for the measurement we bring a selection matched to the office style. If the office is furnished with our furniture, we take the decor from the previous contract — so the new table matches the other items without guessing by eye. We powder-coat the metal frame in the same colour as the work desk legs, so the waiting area continues the interior rather than clashing with it. In the executive office we match the veneer, enamel of the work desk and the colour of the metal parts. Bring photos of the fronts in daylight to the selection: under the showroom lamps the decor shades look different.

Several waiting areas in one order

We handle tables for several floors and branches with one estimate and one contract with a LLP and sole proprietor: invoice, bank transfer, 50 % prepayment and the remaining 50 % after signing the acceptance certificate. All items in the set undergo a test assembly in the workshop, and our team carries out installation according to the office schedule so as not to interfere with visitor reception. Every table carries a 24-month warranty under the contract. A repeat order in the same decor is possible later too, when a new floor, branch or meeting room opens. Lead times for each option are in the price list on this page, and rush orders are also possible. Order one table more than you need: if you rearrange, or especially damage one, a replacement will be available right away, with no waiting.

Care by countertop material

Surface care by material type
MaterialHow to cleanWhat to avoid
Laminated chipboard with PVC edgedamp cloth, mild detergentabrasives, puddles at the joints
Tempered glassglass cleanerimpacts from the corner of heavy objects
Natural veneerdry or slightly damp clothhot dishes without a coaster
Enamelled MDFsoft cloth without solventsscratches from keys and buckles
Metal framedamp clothaggressive floor chemicals

The bottom line on office coffee tables

We have gathered the key things to decide before ordering a table for a waiting area, reception lounge, meeting room or executive office, so it serves for a long time and does not get in guests' way.

  • Size: countertop height is measured from the sofa seat, and length from the length of the soft furniture with room for legs.
  • Shape: round and oval tables go in walk-through areas, rectangular ones along the sofa by the wall.
  • Material: laminated board withstands visitor traffic, while glass and veneer suit places where the table is not moved.
  • Options: add-on, mobile and modular versions, sockets and lighting solve the tasks of a specific area without extra wires and furniture.
  • Decor: the table is ordered in the colour of the office's other furniture so the waiting area continues the interior rather than clashing with it.

12Calculation

How to calculate the cost of a table for the waiting area

Select a model, tabletop size and material in the calculator — the calculation will be sent to the manager on WhatsApp. We quote per item or per set of tables for several office zones.

01Type
02Quantity, pcs of identical items
1 pc
130 pcs
03Carcass
04Fronts
05Hardware
06Options

13Office furniture

What else we make besides office coffee tables

Office furniture

We design and make cabinet furniture for offices with a precise fit to the space and a consistent decor on the floor.

Office tables

We design workstations to fit your office layout and your team's tasks: measurement and a 3D layout plan are free, and the price is fixed in the contract before work starts.

Office wardrobes

We design and make office wardrobes for your documents, equipment and clothing, fitted into a niche with the right number of sections.

Document wardrobes

We'll make a wardrobe to fit your archive or office: free office measurement and a 3D layout plan within 1–2 days, and the price is fixed in the contract.

Clothing wardrobes

A wardrobe fitted into the niche of a reception or changing room keeps things tidy and protects employees' clothing from dust.

Office cabinets

We'll make cabinets for your desk and your needs: with a lock, for office equipment or for filing.

Office sofas

We design and make sofas for receptions, waiting areas and meeting rooms: free measurement with fabric samples and a 3D design within 1–2 days, and the price is fixed in the contract.

Executive office

We design and make an executive office for a manager's needs: meetings, document storage, a rest area.

Executive desk

We design and make a desk for the director's office with free measurement and a 3D layout plan within 1–2 days.

Desk with a meeting extension

An executive desk with a briefing extension brings meetings and the workspace into one line without taking up extra space.

Meeting tables

We design and make tables for meeting rooms to fit the size of your room.

Reception furniture

We furnish a reception to fit your office: desk, sofas, tables and wardrobe in one finish.

Staff furniture

We design workstations to fit your office layout: free measurement and a 3D layout plan within 1–2 days, and the price is fixed in the contract.

Loft office furniture

We furnish an office in one finish: workstations, meeting rooms, reception and rest areas.

Loft tables

A loft table on a steel frame with a wooden or laminated chipboard top solves the workspace problem without losing the office style.