Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
A kindergarten bedroom with a row of pull-out beds with side rails and green bedding

For business · Kindergartens

Beds for kindergartens in Almaty

We make single-tier, stackable, nursery and pull-out beds to suit the bedroom area and the heights of the children in the group: E1 laminated chipboard or birch solid wood, rounded corners, mattress matched to the base. Measurement and 3D design are free, the price is fixed in the contract, warranty 24 months.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 7 days
lead time
24 mo.
warranty under contract

Group bedroom: a row of pull-out beds with side rails and light-coloured mattresses

02Projects

Completed bed projects for kindergartens

Scope, volume, materials and lead time — per project.

  • Junior group bedroom: stackable beds — MEBLIX project, Kindergarten No. 112, Bostandyk districtKindergarten

    Stackable beds for a junior group bedroom

    Kindergarten No. 112, Bostandyk district

    The junior group bedroom was fitted with 25 stackable beds in a matching maple finish: during the day they stack up to free the floor for activities, and at nap time they're set out in minutes. Certificates were handed over at acceptance.

    Volume
    25 single-tier stackable beds
    Materials
    E1 laminated chipboard, rounded corners, 2 mm PVC edge
    Lead time
    12 days
    I want the same
  • 3-tier stackable beds for a compact bedroom — MEBLIX project, Balapan Private Kindergarten, Medeu districtKindergarten

    3-tier stackable for a tight bedroom

    Balaapan private kindergarten, Medeu district

    In the small bedroom of a private kindergarten we installed 12 three-tier stackable beds — 36 sleeping places in a small area. During the day they're stacked, and for cleaning they're taken apart into individual beds.

    Volume
    12 three-tier stackable beds
    Materials
    E1 laminated chipboard, rounded corners
    Lead time
    14 days
    I want the same
  • Nursery group: cots with side rails — MEBLIX project, Kindergarten No. 58, Auezov districtKindergarten

    Beds with side rails for a nursery group

    Kindergarten No. 58, Auezov district

    For the nursery group we made 18 beds with rails around the perimeter for ages from 1.5 years. The rail height was agreed with the teachers, all corners are rounded — little ones don't roll out or get hurt.

    Volume
    18 nursery beds with side rails
    Materials
    E1 laminated chipboard, rounded corners, protective side rails
    Lead time
    13 days
    I want the same
  • Pull-out beds for a full-day group — MEBLIX project, Aigolek Kindergarten, Nauryzbay districtKindergarten

    Pull-out beds for a full-day group

    Aigolek kindergarten, Nauryzbai district

    A full-day group was fitted with pull-out 3-place beds: during the day they're pushed together into one, and at nap time the lower ones roll out on quiet casters. The floor was freed up for a play area without losing sleeping places.

    Volume
    20 pull-out 3-place beds
    Materials
    E1 laminated chipboard, quiet casters, rounded corners
    Lead time
    15 days
    I want the same
  • A turnkey set of beds with mattresses — MEBLIX project, Kindergarten No. 203, Almaly districtKindergarten

    Turnkey bed sets with mattresses

    Kindergarten No. 203, Almaly district

    Two bedrooms were fitted out turnkey: 30 beds with children's PU foam mattresses and removable washable covers. The mattresses fit the bed exactly, with no gaps — the kindergarten didn't have to buy anything separately.

    Volume
    30 beds with PU foam mattresses included
    Materials
    E1 laminated chipboard, PU foam mattresses, removable covers
    Lead time
    16 days
    I want the same
  • Beds on a metal frame for a large kindergarten — MEBLIX project, Kindergarten No. 167, Turksib districtKindergarten

    Beds on a metal frame for a large kindergarten

    Kindergarten No. 167, Turksib district

    A large kindergarten with heavy foot traffic was fitted with 40 beds on a welded metal frame: they handle the load and don't loosen over the years. Matching finish across the whole batch, all pipes and corners covered with caps.

    Volume
    40 beds on a metal frame, matching finish
    Materials
    metal frame powder-coated, E1 laminated chipboard
    Lead time
    18 days
    I want the same

03How we work with kindergartens

How ordering beds for kindergartens works

Book a measurement specialist for a kindergarten
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 7 days

    Production

    In the workshop we cut E1 laminated chipboard, edge the ends, round the headboard corners, assemble the beds with a base and sew mattresses to size; lead times for each option are in the price list.

  5. 05

    1 day

    Delivery and installation

    We deliver, bring in, assemble, position and adjust the furniture. After installation we clean up after ourselves.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

04Prices

Prices for beds for a kindergarten bedroom

The "from" price is for one sleeping place in the basic configuration made of E1 laminated chipboard with rounded corners. The final price for a bedroom set is fixed in the contract after a free measurement.

  • 50% prepayment, the rest after installation and sign-off
  • Kaspi, card, cash, bank transfer for companies
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • Malysh single-tier stackable bedE1 laminated chipboard, rounded cornersfrom 7 daysfrom 18 000 ₸
  • Bortik single-tier bed with a side railE1 laminated chipboard, rounded cornersfrom 8 daysfrom 22 000 ₸
  • Karapuz nursery cot with side railsE1 laminated chipboard, rounded cornersfrom 8 daysfrom 24 000 ₸
  • Lyulka nursery cot playpenE1 laminated chipboard, rounded cornersfrom 9 daysfrom 27 000 ₸
  • Krepysh bed on a metal framemetal frame, E1 laminated chipboard, rounded cornersfrom 9 daysfrom 28 000 ₸
  • Oblachko children&#x​27;s sofa bedE1 laminated chipboard, velvet, rounded corners, metal framefrom 10 daysfrom 29 000 ₸
  • Adjustable growing bed "Stupenka"E1 laminated chipboard, rounded cornersfrom 9 daysfrom 30 000 ₸
  • Bed with mattress included "Dryoma"E1 laminated chipboard, PU foam mattress, rounded cornersfrom 9 daysfrom 32 000 ₸
  • Bed with linen drawer "Uyut"E1 laminated chipboard, rounded cornersfrom 10 daysfrom 33 000 ₸
  • Convertible bed "Rasti"E1 laminated chipboard, rounded cornersfrom 9 daysfrom 34 000 ₸
  • Podium bed with pull-out drawers "Teremok"E1 laminated chipboard, rounded corners, drawers on rollersfrom 12 daysfrom 34 000 ₸
  • Bed with orthopedic base "Zdorovye"E1 laminated chipboard, birch slats, rounded cornersfrom 10 daysfrom 36 000 ₸
  • Pull-out 2-person bed "Tandem"E1 laminated chipboard, rollers, rounded cornersfrom 10 daysfrom 38 000 ₸
  • Stackable wooden bed "Gnyozdyshko"birch solid wood, E1 laminated chipboardfrom 12 daysfrom 40 000 ₸
  • Pull-out 3-person bed "Matryoshka"E1 laminated chipboard, rollers, rounded cornersfrom 11 daysfrom 54 000 ₸

05For legal entities and public-sector clients

We supply beds for kindergartens to businesses with contract and invoice

We work with private and public kindergartens under a contract and by bank transfer. Items, height groups, finish and installation date are set in the contract before production begins.

Request a contract and invoice
  1. 01Contractitems, height groups, finish and installation date — before we start
  2. 02Estimate and 3D designfree, within 1–2 days after measuring the groups
  3. 03Certificates and reportsfor materials and items — for SES acceptance
  4. 04Closing documentsacceptance certificate and delivery note after installation
50%
private kindergarten prepayment, balance — after the acceptance report
Bank transfer
for LLPs, sole proprietors and state-owned enterprises; public procurement — quotation and specification to the technical brief
24 mo.
warranty on items per the contract
Set
from one group to a kindergarten with several groups — one estimate and one contract
Repeat order
in the same finish when a new group opens

06Principles

What a safe bed for a kindergarten should be like

  1. 01

    Bed by height group

    We select the bed length and height according to the GOST 19301 growth groups and the tallest children in the group, and mark each model with the group colour.

  2. 02

    Mattress with no gaps at the sides

    We make the PU foam mattress exactly to the internal size of the bed so that a sleeping child's arm or leg cannot get into the gap at the side.

  3. 03

    Rounded corners and thick edge banding

    We round the corners of the headboards and sides and cover the ends with vandal-proof 2 mm PVC edge banding — little ones can't pick at it and won't get hurt.

  4. 04

    Sides for the nursery group

    Nursery models have a side around the perimeter, and the gap between the slats lets you see the child but won't let a hand through.

  5. 05

    Stoppers on drawers and pull-out beds

    Drawers for linen and pull-out beds stop in the fully extended position and don't fall onto children's feet if pulled sharply.

  6. 06

    Stability check in the workshop

    We assemble every model in a test build and check that the sleeping place doesn't wobble when a child sits on the edge.

A stack of E1-class Egger and Kronospan laminated chipboard sheets in the workshop warehouse before cutting furniture for a kindergartenA CNC machine cuts a laminated chipboard sheet into parts for children's beds and cabinetsAn edge banding machine seals the ends of parts with anti-vandal PVC edge in the MEBLIX workshopA craftsman finishes the fronts of children's furniture in the paint booth of our Almaty workshopA craftsman checks the test assembly of children's furniture in the workshop before shipping to the kindergartenA finished kindergarten bed with a mattress after assembly in a group bedroom

01 / 06

07Production

How a kindergarten bed goes from board to bedroom

Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.

  1. A stack of E1-class Egger and Kronospan laminated chipboard sheets in the workshop warehouse before cutting furniture for a kindergarten
    01

    Egger · Kronospan · E1

    Board

    Egger and Kronospan boards of emission class E1 arrive at the workshop warehouse. 40+ laminated chipboard decors, 16–18 mm thick. Class E1 — for kindergarten groups and bedrooms.

  2. A CNC machine cuts a laminated chipboard sheet into parts for children's beds and cabinets
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the drawings, and the machine cuts the board to them. Dimensions come from a laser measurement accurate to 1 mm.

  3. An edge banding machine seals the ends of parts with anti-vandal PVC edge in the MEBLIX workshop
    03

    Blum · Hettich · Boyard

    Edging and drilling

    The edge-banding machine seals the edges, then we drill holes for Blum hinges and Hettich runners.

  4. A craftsman finishes the fronts of children's furniture in the paint booth of our Almaty workshop
    04

    Any RAL colour

    Enamel and veneer

    A finishing specialist paints the fronts to RAL — matt and gloss. During the test build we place the base and mattress in the bed and check that not a single gap remains at the sides.

  5. A craftsman checks the test assembly of children's furniture in the workshop before shipping to the kindergarten
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the modules in the workshop before dispatch, checking front gaps and drawer travel. The quality control department signs the item off for shipping.

  6. A finished kindergarten bed with a mattress after assembly in a group bedroom
    06

    Installation to fit the kindergarten schedule

    Finished item

    We deliver, carry in and assemble within 1 day, adjust the furniture and clean up after ourselves. Warranty of 24 months from signing of the acceptance certificate.

08Team

Who will make the beds for your kindergarten

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

09FAQ

Frequently asked questions about custom beds for kindergartens

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01How much does one sleeping place for a group cost?

For a group there is the single-tier stackable "Malysh" bed and the "Dryoma" model with a mattress included. See the price of each in the price list above on this page. We calculate the bedroom total in the estimate after measurement and fix it in the contract.

02Which bed to choose if the bedroom is needed for activities during the day?

Stackable or pull-out. Stackable beds are stacked after sleep, the pull-out lower place slides under the upper one, and the floor is freed up for play.

03Do you make beds for the height of children in different groups?

Yes, we select the bed length and height according to the GOST 19301 growth groups. We mark each bed with the group colour so the sizes don't get mixed up when rearranging.

04Can I order beds with mattresses at once?

Yes, we make the PU foam mattress in a removable cover exactly to the size of the bed. That way no gaps remain at the sides, and the bedroom is ready for sleep right after installation.

05What is better for a bedroom — slats or a solid base?

A solid laminated chipboard base is easier to wash, birch slats ventilate the mattress better. For a warm bedroom that is rarely aired we recommend slats; for a strict cleaning schedule — a solid base.

06Which beds are suitable for a nursery group?

Low beds with sides around the perimeter or a playpen-style model. The side keeps the little one in place during sleep, and through the gap between the slats the teacher can see the child.

07Will the bed withstand daily rearrangements for cleaning?

Yes, for large kindergartens we make beds on a powder-coated steel frame — the frame doesn't work loose. Stackable models made of solid birch also easily withstand frequent rearranging.

08Do you do a free bedroom measurement before ordering?

Yes, measuring the bedroom is free: we take the dimensions, windows, doors and radiators. Based on the results, within 1–2 days we prepare a 3D layout of the beds with aisles between the rows.

09Can we make it with beds by the opening of a new group?

Yes, if ordered in advance: the lead time for each model is shown in the price list on this page, and a rush order is possible for a fixed opening date. We coordinate the bedroom installation to fit the kindergarten schedule.

10What documents will the kindergarten receive along with the beds?

We provide certificates of conformity and sanitary-hygienic reports for materials and items for SES acceptance. After assembly we sign the acceptance certificate and hand over the delivery note.

10Reviews

Reviews of beds for kindergartens

4,9

average rating
on Google and Zoon

See all reviews

11Article

Kindergarten beds in Almaty sized to the bedroom area and the group's age

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

We make kindergarten beds in our own workshop in Almaty, sized to the bedroom area and the group's age: single-tier, stackable, toddler beds with side rails, and pull-out beds. The frame is E1-class laminated chipboard or birch solid wood with rounded corners, the base is slats or a solid bed bottom, and a mattress can be ordered as part of the set.

Which kindergarten beds to choose for your bedroom

The type of sleeping place is determined by the bedroom area, the number of children in the group, and how the room is used during the day. The same group in different buildings gets different models.

Single-tier models for a spacious bedroom

A single-tier model is the basic option when the bedroom is separate and there is enough space for every child in the group. Such a kindergarten bed stands on four sturdy supports, has a low bed base and a headboard rail, so a child can lie down and get up on their own without the teacher's help. We make single-tier models in two versions: standard and stackable, which can be stacked when needed. The standard model is easier to maintain: you can easily sweep under it, and the bed can be made from any side. For a group where the bedroom is never used for activities, this is the calmest solution: it needs no mechanisms and doesn't wear out from daily rearranging. A single-tier model is chosen wherever space allows, while other types are used only when there aren't enough square meters or the bedroom is needed for activities during the day.

Stackable and tiered models for tight spaces

Stackable models are stacked after nap time, while tiered beds are placed where the bedroom floor can't fit the whole group. We make the stackable bed low and light: a teacher can lift it alone and place it on the neighboring one, and the stack stands steady thanks to fixing lugs on the corners. This frees up almost the entire floor in a few minutes, turning the room into an activity hall. Tiered models — two- and three-tier — save floor space differently: the sleeping places are raised but stay in place all day. They are chosen for bedrooms without a play function. We describe the construction of tiered and pull-out models in detail in the sub-sections of the catalog; here it's important to decide the main question — whether you need free floor space during the day.

How the bed type depends on the room

Sleeping place types for different rooms
TypeWhen it fitsWhat to consider
Single-tiera separate spacious bedroomaisles between rows
Stackablethe bedroom serves as a hall during the dayspace for the stack
Toddler bed with railsa younger age grouprail height around the perimeter
Two-tiera tight bedroom without a play arearails on the upper bed
Pull-outthe bedroom doubles as a playroombed travel limiters
Podium beda hall with a play podiumaccess to the drawers

Bed size and height by age

From the toddler group to the preparatory group, a child grows noticeably, and along with growth the bed length, rail height, and comfortable height above the floor change.

Bed length and width by growth groups

We make sleeping places according to the height groups of GOST 19301, where the length and width of the bed depend on the height of the children in the group. Beds for preschools with the same bed for all ages are a common purchasing mistake: a child in the preparatory group is cramped on a nursery-size bed, while a toddler is uncomfortable on a place that is too wide. Before ordering, teachers measure the children's height, and we draw up the specification based on the tallest children in the group, not the average. A bed with extra length will last another year when the group moves up to the next age. We mark each model with the color of its height group so that the size is immediately clear when beds are rearranged or passed to another group. We choose the height of the bed above the floor so that a child can sit on the edge and stand up without a step, and a teacher can comfortably bend down to them.

Nursery beds with side rails

For the nursery group we make beds with rails around the perimeter and a low bed, and for the youngest children, a playpen-style model. The rail keeps the child in place during sleep but does not turn the bed into a cage: we choose the height so that a teacher can freely cover the child with a blanket and adjust the pillow without lifting them. We round all corners of the rails and cover the ends with 2 mm anti-vandal PVC edge, because toddlers chew and pull at the edge. Between the rail slats we leave a gap through which the child is clearly visible but a hand cannot slip through. We make nursery models lightweight, as they are moved for wet cleaning several times a week. For toddlers moving up to the junior group, models with a removable part of the rail are convenient: the sleeping place stays the same, only the barrier changes.

Models that grow with the group

  • Convertible bed: the bed is lengthened by repositioning the headboard, and one model serves a child from the junior group to the senior group without replacement.
  • Height-adjustable model: the height of the bed and rail changes to suit the neighboring height group when older children arrive in the bedroom.
  • Removable rail: on nursery models the side rail is removed, and the bed turns into a regular single-tier bed for the junior group.
  • Conversion time: adjustments are made in summer, when the group moves up to the next age and the bedroom is being prepared for the new year anyway.
  • Check after adjustment: after repositioning the headboard, the fasteners are tightened and it is checked that the bed does not wobble or creak under weight.

Base and mattress for kindergarten beds

What the mattress rests on affects both the child's sleep and the cleaning of the bedroom. The base and mattress are chosen together, because one does not work without the other.

Slats or a solid bed base

A solid base made of laminated chipboard is easier to wash, while a base of birch slats ventilates the mattress better from below. We make both options and choose them for the bedroom: in a well-ventilated room with a strict cleaning schedule, a solid base is more convenient, as it is wiped clean in one motion. If the bedroom is warm, windows are rarely opened, and mattresses are not taken out to air, slats are chosen: air passes through the base and the mattress does not become damp. A model with an orthopedic base of birch slats keeps the child's spine straight and does not sag under weight over the years of use. We secure the slats in their holders so that none pops out when a child jumps on the bed. We make the solid base with ventilation holes so that moisture does not collect under the mattress. The base type is stated in the specification, and when reordering, a new group receives the same one.

PU foam mattress included with the bed

We supply the polyurethane foam mattress together with the bed, and it fits the sleeping area exactly, with no gaps at the sides. The gap between the mattress and the side is an overlooked hazard: a sleeping child's arm or leg can get caught in it, so it's better not to buy a mattress separately that is 'approximately the right size'. A child's bed for kindergarten with a mattress — the price of the set is listed as a separate line in the price list on this page — arrives ready for sleep. We make the mattress with a removable cover that is washed together with the group's bed linen. We select the mattress height to match the side height: the mattress does not rise above the edge of the bed, and the side continues to do its job. For nursery models, we make the mattress thinner and denser so that the child does not sink in or slide towards the side in their sleep.

How to choose a mattress and mattress protector

  • Firmness: a mattress for a preschooler is chosen to be even and moderately firm, without deep sinking under the child's shoulders and pelvis.
  • Size: the mattress is ordered strictly to the internal size of the sleeping area so that no gap remains between the edge and the side.
  • Removable cover: the zippered cover is removed and washed together with the linen, and the mattress itself is periodically aired in the sun.
  • Mattress protector: a waterproof mattress protector protects the mattress in the nursery group and extends its service life several times over.
  • Spare: two mattress protectors are kept for each sleeping place so that one is always clean while the other dries after washing.

Frame and materials of the bed for the group bedroom

The frame takes the jumps, rearrangements and daily wet cleaning. The material of the sides, headboards and supports determines how many years the bedroom will last without repair.

Frame made of E1 laminated chipboard and birch solid wood

We cut the sides and headboards from Egger and Kronospan E1 class laminated chipboard, and for some models we use birch solid wood under water-based lacquer. E1 class board is suitable for a bedroom where children spend several hours every day, and the smooth coating withstands wet cleaning. A child's bed for kindergarten made of laminated chipboard gets a 2 mm anti-vandal PVC edge on all ends and rounded corners, so the child will not get hurt on the edge even if they fall next to it. Birch solid wood is chosen for stackable models that are lifted and moved every day: wood tolerates corners hitting each other better and is not afraid of chips on the ends. Water-based lacquer does not give off odor and does not crack from frequent washing. For both materials, we carry out a control assembly in the workshop and check stability before shipping, and we select the decor to match the group's cabinets and tables.

Metal frame for large kindergartens

We recommend a bed on a steel frame with powder coating for kindergartens with large groups and high bedroom traffic. The frame made of profile pipe does not loosen from daily rearrangements for cleaning, and the sleeping area and headboards made of E1 laminated chipboard are bolted to it and can be replaced separately when worn. The powder coating withstands cleaning and disinfecting solutions, and no rusty spots appear on the legs. The supports get plastic glides: they do not scratch linoleum and do not slip on wet floors. The metal frame is heavier, so such models are not stacked but placed in permanent locations. For kindergartens that equip several bedrooms at once, the metal frame is also convenient because all sleeping places are the same height, and spare sleeping areas and headboards can be ordered later in the same decor.

Sides, headboards and rounded corners

  • Rounded edges: the frame has no sharp corners — every corner of the headboard and side rail is rounded, and the ends are covered with thick edge banding.
  • Gaps: no gaps are left between the sleeping surface, headboard and side rail that a sleeping child's hand, leg or head could get caught in.
  • Fasteners: bolt heads are countersunk or covered with caps so they don't tear the bedding or cause scratches.
  • Stability: the sleeping place doesn't wobble or shift when a child sits on the edge or climbs in from one side.
  • Ladders and supports: on models with a podium, the steps are made wide and non-slip, and the supports have floor glides that don't scratch the floor.
  • Acceptance: on delivery, every headboard is checked for wobble, and the fasteners are tightened once more after the first week of use in the bedroom.

How to arrange beds in a kindergarten bedroom

The layout determines how quickly the teacher settles the group, how easy it is to wash the floor, and whether the children can calmly walk to their own place.

Aisles, windows and radiators

Aisles are left between the rows of sleeping places, and headboards are not placed right up against windows and heating radiators. A child by a radiator overheats and sleeps poorly, while by a window they are exposed to drafts during ventilation, so the outer rows are moved away from the exterior walls. Aisles are needed not only for the children: the teacher must be able to reach any child without stepping over neighbouring beds, and the assistant teacher must be able to pass with a mop along each row. It is convenient to place the headboards of neighbouring places in different directions so that children don't breathe into each other's faces. The layout is planned together with the kindergarten's medical worker, and the finished plan is attached to the bedroom documents: that way, when the furniture is replaced, the new pieces go in the same places, and the aisles don't have to be recalculated from scratch.

A bedroom that becomes a playroom during the day

If the bedroom doubles as a playroom during the day, we use stackable or pull-out models that are put away after nap time. Kids beds for a kindergarten with a combined bedroom are chosen based on how much time the teacher has for rearranging: a stack of stackable places is assembled in a few minutes, and a pull-out bed slides in with a single movement. We allow space for storing the stack or the carcass of the pull-out model in the 3D design at the measurement stage, otherwise the assembled beds will take up half the playroom. The plan immediately shows where the beds stand during sleep and how much floor area is freed up during the day. The flooring in such a bedroom is chosen to be resistant to moving furniture, and the supports come with soft glides so they don't leave marks. That way the bedroom-playroom changes purpose every day without damage to the floor or the furniture.

Labelling and assigning places

  • Own place: each child has their own bed for the whole year, and their place in the row doesn't change after weekends and holidays.
  • Label: a picture label is attached to the headboard, the same as on the cubby in the changing room, so the little one can recognise their own place.
  • Height group: colour coding of the height group on the end helps avoid mixing up sizes when rearranging and cleaning.
  • Group log: the layout diagram with labels is kept in the log, and a substitute teacher settles the children without confusion.
  • Bedding: bedding is labelled with the same picture as the sleeping place, and after washing it returns to its own child.

Bedroom hygiene and a turnkey package

A bedroom requires daily cleaning and regular changing of bedding, and it is more convenient to order the sleeping places for the whole group at once rather than piece by piece.

Under-bed drawers and ventilation

A model with an under-bed drawer frees up the wardrobe in the bedroom: each child's pillow, duvet and set of bed linen are stored right under their own bed. We fit the drawer with a travel stop so it does not slide out on a sharp pull and does not pinch fingers. We make the drawer bottom with ventilation holes, otherwise the linen in a closed space gets damp and starts to smell. For bedrooms where linen is stored centrally, the drawer is replaced with an open shelf under the bed base — it is easier to wipe down. A platform bed with pull-out drawers combines storage and a sleeping place in one carcass, and in a small bedroom more free floor space is left. Between sleep and cleaning, the bedroom is aired, and the bedspreads are taken off so the mattresses and bed bases have time to dry out, and the drawers are left slightly open while the room is aired.

How to clean the frame and the base

  • Daily: Laminated chipboard, water-based lacquer and powder coating are wiped with a damp cloth and a mild agent, without abrasives.
  • Disinfection: the solution is applied to the headboards and side rails and wiped dry, leaving no drops in the joints or around the fasteners.
  • Slats: the slatted base is wiped on both sides when the linen is changed, and the space under the bed base — together with the floor.
  • Edge banding: the ends are wiped rather than flooded with water, so that moisture does not get under the edge banding and the board does not swell.
  • Glides: the plastic glides on the supports are washed together with the floor and replaced when worn, so that the legs do not scratch the bedroom flooring.
  • Inspection: during a deep clean, the bolt tightness and the integrity of the edge banding are checked, before a small defect turns into a breakdown.

Turnkey bed sets with mattresses

We supply beds for kindergartens as a set for a group: free measurement of the bedroom, a 3D layout design in 1–2 days, production in our own 600 m² workshop, delivery and assembly by our own team. The specification includes sleeping places by height group, mattresses sized exactly to the bed base and labels, so the bedroom is ready for nap time right after installation. Lead times for each option are in the price list on this page, and an urgent order for a group opening is possible. We schedule bedroom installation around the kindergarten's routine — at weekends, in the evening or during the summer renovation. We work with kindergartens under a contract and by bank transfer; after assembly we sign an acceptance certificate and hand over the delivery note. The warranty on the item is 24 months under the contract, and when a new group opens, sleeping places can be reordered in the same decor.

The bottom line on beds for kindergartens

A sleeping place in a group is chosen by several criteria at once, and a mistake in one of them is then hard to fix without replacing the whole bedroom.

  • Type by room: single-tier beds go in a spacious bedroom, stackable and pull-out beds — in a bedroom-playroom, bunk beds — in a cramped one.
  • Size by height: the bed length is chosen by height group and the tallest children, not by the group's average height.
  • Base and mattress: slats ventilate better, a solid bed base is easier to wash, and the mattress is ordered strictly to the size of the bed base.
  • Layout: aisles between rows, headboards away from windows and radiators, and an assigned place for each child.
  • Care: damp cleaning without abrasives, checking the fasteners and edge banding, two mattress protectors for each sleeping place.

12Calculation

How to calculate the cost of beds for a kindergarten

Choose a model, the number of sleeping places and the material in the calculator — the calculation will go to the manager on WhatsApp, and we'll send an exact estimate for the bedroom after the measurement.

01Type
02Quantity, pcs of identical items
1 pc
130 pcs
03Carcass
04Fronts
05Hardware
06Options

13Furniture for kindergartens

What else we make besides beds for kindergartens