Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
Two bar stools with brown faux-leather soft seats on a metal frame at the counter

For business · HoReCa

Custom bar stools in Almaty

We make bar and semi-bar stools to match the height of your counter or kitchen island: a steel or solid wood frame, a soft seat and washable upholstery. Measurement and 3D design are free, the price is fixed in the contract, warranty 24 months.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 7 days
lead time
24 mo.
warranty under contract

Bar stools with soft eco-leather seats on a black metal frame at the island

02Venue cases

Completed bar stool projects

Object type, volume, materials and lead time — per project.

  • Semi-bar stools for a kitchen-living room — Orbita microdistrict, Bostandyk districtEstablishment

    Semi-bar stools for a kitchen-living room

    Orbita microdistrict, Bostandyk district

    Four semi-bar stools on a black metal frame with matting upholstery to match the kitchen. They slide compactly under the island countertop and don't block the walkway.

    Volume
    4 semi-bar stools
    Materials
    metal, matting
    Lead time
    14 days
    I want the same
  • A set of bar stools for a kitchen island — Miras microdistrict, Bostandyk districtEstablishment

    A set of bar stools for a kitchen island

    Miras microdistrict, Bostandyk district

    Four bar stools on a metal frame with soft faux-leather seats for a kitchen island. Height fits under the countertop, stable, with a footrest.

    Volume
    4 bar stools, faux leather
    Materials
    faux leather, metal
    Lead time
    10 days
    I want the same
  • Bar stools for a loft apartment — Nova City residential complex, Auezov districtEstablishment

    Bar stools for a loft apartment

    Nova City residential complex, Auezov district

    Three loft-style bar stools: a solid wood seat on a black metal frame. For a bar counter in a kitchen-living room.

    Volume
    3 bar stools, wood+metal
    Materials
    solid wood, black metal
    Lead time
    12 days
    I want the same

03How we work with venues

How ordering stools for your counter works

Book a measurement specialist to visit your site
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 7 days

    Production

    In the workshop we weld and paint the frame or assemble it from solid wood, upholster the seat in the soft furniture section and carry out a test assembly. Lead times for each model are in the price list on this page.

  5. 05

    1 day

    Delivery and installation

    We deliver, bring in, assemble, position and adjust the furniture. After installation we clean up after ourselves.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

04Prices

How much a custom bar stool costs

The "from" price is for one chair in the basic configuration: frame, seat and upholstery from the price list line. The final amount for the whole batch is fixed in the contract after a free counter measurement.

  • 50% prepayment, the rest after installation and sign-off
  • Kaspi, card, cash, bank transfer for companies
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • For cafes, set (per piece)metal frame, faux leather16–25 daysfrom 21 000 ₸
  • Semi-bar stoolmetal/​solid wood, fabric12–18 daysfrom 22 000 ₸
  • Bar stool with a metal framemetal, fabric/​faux leather12–18 daysfrom 24 000 ₸
  • Bar stool with a soft seatmetal frame, faux leather12–18 daysfrom 26 000 ₸
  • Bar stool with a wooden framebeech solid wood, fabric14–20 daysfrom 32 000 ₸
  • Bar stool with height adjustmentmetal, gas lift, faux leather14–20 daysfrom 34 000 ₸
  • Semi-bar stool with metal legs and a soft seatmetal, fabric7–10 daysfrom 42 000 ₸
  • Semi-bar stool with jacquard upholsteryjacquard, metal7–10 daysfrom 46 000 ₸
  • Wooden semi-bar stool with a woven seatbeech, rattan7–10 daysfrom 48 000 ₸
  • Wooden bar stool made of solid oakoak7–10 daysfrom 55 000 ₸
  • Soft bar stool with a gas lift and chrome basefaux leather, chrome7–10 daysfrom 58 000 ₸
  • Bar chair with stand and shelfmetal, laminated chipboard7–10 daysfrom 65 000 ₸
  • Upholstered swivel bar stool with armrestsfaux leather, metal7–10 daysfrom 68 000 ₸
  • Upholstered swivel bar stool with velvet upholsteryvelvet, metal7–10 daysfrom 72 000 ₸
  • Carved wooden bar stool with high backash7–10 daysfrom 75 000 ₸

05For businesses

We supply bar stools to businesses with contract and invoice

We work with LLPs and sole proprietors on bank transfer. Price, materials and lead times are in the contract before production starts: the furniture fits into the opening schedule of the venue.

Request a contract and invoice
  1. 01Contractprice, materials, lead times and installation date — before we start
  2. 02Estimate and 3D designfree, within 1–2 days after measurement
  3. 03Invoice for paymentbank transfer for companies and sole traders
  4. 04Closing documentsacceptance certificate and delivery note after installation
50%
deposit, balance — after the acceptance certificate
Bank transfer
for LLPs and sole proprietors; for private clients — card and cash
24 mo.
warranty on items per the contract
Series
the whole hall, hotel floor or dorm rooms — one estimate and one contract
Pilot sample
for a series we first make one sample — approve it and launch the run

06Principles

What we build into every custom chair

  1. 01

    Height to fit your countertop

    We calculate the seat and footrest height from the actual countertop at the measurement, not from the catalog, so that knees fit freely under the edge and the foot rests on the support.

  2. 02

    Metal where guest traffic is high

    For bars and coffee shops we weld the frame from powder-coated steel: it withstands sudden loads, rocking and daily floor washing around the legs.

  3. 03

    A seat that holds its shape

    The seat base is plywood, topped with high-density foam. The edge doesn't sag, and the upholstery is stretched without wrinkles where it rubs against knees.

  4. 04

    Upholstery you can wash

    Faux leather and contract vandal-resistant fabrics wash off coffee and drinks. For home there's velvet and jacquard — we select the fabric by care and load.

  5. 05

    One finish with tables and the counter

    We make the chairs, tables and hall counter in one finish. For a series we first assemble a pilot sample and approve it, and reorders then go into the same series.

  6. 06

    Test assembly in the workshop

    We fully assemble every chair before shipping: we check that the frame doesn't wobble, the seams and coating are even, and the gas lift and swivel work through the full range.

A stack of Egger and Kronospan laminated chipboard sheets in our workshop's warehouse before cutting for commercial furnitureA CNC machine cuts a laminated chipboard sheet into furniture parts for a venue according to the drawingsAn edgebanding machine seals the ends of parts with 2 mm PVC edge in the MEBLIX workshop in AlmatyA craftsman coats MDF fronts with enamel in our workshop's spray boothA craftsman checks the test assembly of an item in the workshop before it is sent to the customer's siteFinished bar stools with soft seats at a kitchen island after delivery

01 / 06

07Production

How a chair goes from blank to assembly

Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.

  1. A stack of Egger and Kronospan laminated chipboard sheets in our workshop's warehouse before cutting for commercial furniture
    01

    Egger · Kronospan · E1

    Board

    Egger and Kronospan boards of emission class E1 arrive at the workshop warehouse. 40+ laminated chipboard decors, thickness 16–18 mm. Class E1 — for halls, rooms and bedrooms.

  2. A CNC machine cuts a laminated chipboard sheet into furniture parts for a venue according to the drawings
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the drawings, and the machine cuts the board to them. Dimensions come from a laser measurement accurate to 1 mm.

  3. An edgebanding machine seals the ends of parts with 2 mm PVC edge in the MEBLIX workshop in Almaty
    03

    Blum · Hettich · Boyard

    Edging and drilling

    The edge-banding machine seals the edges, then we drill holes for Blum hinges and Hettich runners.

  4. A craftsman coats MDF fronts with enamel in our workshop's spray booth
    04

    Any RAL colour

    Enamel and veneer

    A finishing specialist paints fronts to RAL — matte and gloss. For chairs, a test assembly matters: we fit the frame, seat and footrest together in the workshop so the seat doesn't wobble on site.

  5. A craftsman checks the test assembly of an item in the workshop before it is sent to the customer's site
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the modules in the workshop before dispatch, checking front gaps and drawer travel. The quality control department signs the item off for shipping.

  6. Finished bar stools with soft seats at a kitchen island after delivery
    06

    Installation to fit your opening schedule

    Finished item

    We deliver, bring in, assemble in 1 day, adjust the furniture and clean up after ourselves. Warranty is 24 months from signing the acceptance certificate.

08Team

Who will make your chairs for the counter

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

09FAQ

Frequently asked questions about custom bar stools

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01Why does a chair as part of a cafe set cost less than a single one?

A chair bought as part of a café set is cheaper than a single one: a wholesale price applies to the series, and the model and cutting repeat across the whole batch. A single semi-bar stool costs slightly more per piece. The other options and their prices are in the price list on this page.

02Can I order just two or three chairs for home?

Yes, we also take small orders for a kitchen-living room, not just batches for venues. Free delivery applies to large orders, the threshold is stated on the Delivery and payment page; the manager will give the delivery terms for a small order when calculating.

03Can you make a chair from a photo or sketch?

Yes, from a photo or sketch we clarify the dimensions, frame and upholstery for your counter and calculate the cost. If the model goes into a series, we first make a pilot sample and approve it, then start the batch.

04Do you have ready-made chairs in stock?

No, we don't resell ready-made furniture: every chair is made to order in our own workshop in Almaty. Lead times for each option are in the price list on this page; urgent orders are possible.

05Will you match chairs to a counter or table I already bought?

Yes, a measurement specialist will come to the site free of charge, measure the countertop height, the length of the counter and the walkway. Based on the measurement we select the seat and footrest height and show the layout in a 3D design.

06Do you make chairs with a non-standard seat height?

Yes, we set the seat and footrest height to your surface, not to a standard catalog. If the countertops in the room are of different heights, a gas-lift model with adjustment is more convenient.

07How are bar stools delivered and assembled?

Our team delivers and places the chairs. Within Almaty and up to 30 km, delivery is free for large orders; beyond 30 km — for an extra charge. For a venue, we agree the installation time to fit your opening schedule.

08Can the seat be reupholstered with a different fabric later?

Yes, the seat detaches from the frame, so the upholstery can be replaced without replacing the whole chair. It's convenient to choose new fabric from samples in the showroom, and the chair itself has a 24-month warranty under the contract.

09How do I care for a chair made of solid oak or ash?

Wipe the frame with a soft damp cloth and dry it immediately, without abrasive products. Don't place the chair right against a radiator or in direct sun so the wood doesn't dry out. Replace the leg pads when they wear out.

10Can the production of chairs be sped up for an opening?

Yes, an urgent order is possible: give the venue's opening date in your first message and we'll check it against the workshop's schedule. Base lead times for each model are in the price list on this page; the agreed date is written into the contract.

10Reviews

Reviews of bar stools

4,9

average rating
on Google and Zoon

See all reviews

11Article

Custom bar stools in Almaty from MEBLIX manufacturer

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

We make MEBLIX bar stools in our own 600 m² workshop in Almaty to fit the height of your bar counter or kitchen island: a steel frame with powder coating or solid wood, a plywood seat with high-density foam, upholstery in washable fabrics and faux leather. Measurement and 3D design are free, with a 24-month warranty under the contract.

What bar stool height you need for a counter and island

Comfort at a high seat is set not by the shape of the model but by the gap between the seat and the countertop. Every calculation starts with this figure: the footrest, the mechanism and the number of seats along the counter all depend on it.

How to calculate seat height from the countertop

Seat height is calculated downward from the countertop: about 25–30 cm is left between them so that knees and thighs fit freely under the edge. A surface 90 cm high needs a seat of about 60–65 cm, a counter 110 cm high needs about 75–80 cm. Bar stools are chosen by this gap, not by the model name in the catalog: the word "bar" at different factories means a height that varies by 5–10 cm. The second reference point is the footrest: it is positioned so that the thigh rests horizontally on the seat and the foot does not stretch downward. Guests' height also affects the choice — a tall person needs a larger gap, a shorter person needs a higher footrest. Measure to the lower edge of the countertop or apron, not to the top surface: a frame or drawer under the countertop takes up knee room by its own thickness.

Which seat height suits your surface

Matching surface height and seating
SurfaceCountertop heightSeat heightWhat to choose
Kitchen island85–92 cm60–67 cmsemi-bar model
Wall-side counter by the kitchen unit90–95 cm63–70 cmsemi-bar or with gas lift
Tall bar counter105–115 cm75–82 cmmodel with footrest
Surfaces of different heights in one roomvariousadjustablemodel with gas lift

How many seats will fit along the counter

During the measurement we calculate seating places by the length of the counter, the width of the seat and the spacing between stools, and in the 3D layout design we show how guests will sit and walk behind each other. Measurement at the site and the design are free and take 1–2 days. A guideline for a fixed model without armrests is about 55–60 cm of counter per guest, for a swivel model or one with armrests — 65–70 cm. We also allow separately for the passage behind the backs: if a waiter with a tray walks behind the seating or a door opens, the row is shifted or one seat is removed. At the corner of the counter one seat fewer is placed, otherwise the neighbors' knees collide. Swivel models and models with armrests need wider spacing, so it is better to count seats after choosing the model, not before.

Frame, support and mechanisms for daily load

A tall stool is loaded differently from an ordinary one: the center of gravity is higher, the guest leans on the footrest, turns and stands up with a jerk. That is why the frame, support and mechanisms are chosen for the real load, not just by appearance.

Frame in metal or solid wood

We make the frame from powder-coated steel or solid beech, oak, and ash, and the choice depends on how many times a day the chair is sat on and where it stands. Steel tube withstands shock loads and rocking, and powder coating wears off from footwear on the footrest noticeably slower than regular paint. Solid wood is warmer to the touch and quieter on tile, but requires careful joints: the legs are connected with stretchers and crossbars so the frame doesn't loosen. A frame made of oak and ash is heavier than a beech model and stands more steadily at a high seat height. For a venue with a flow of guests, metal is more practical, while wood is appropriate at home and in a restaurant with calm seating, where furniture isn't moved around the hall every half hour.

Footrest, base and floor protection

  • Footrest: at a high seat height it is essential — without support the legs dangle, and within half an hour the guest starts fidgeting and sliding down.
  • Footrest height: when we make a custom bar stool, we set the footrest to the height of those who will sit, not according to an average drawing.
  • Base: four legs with crossbars are more stable on uneven floors, a round base on a single support saves space at the counter.
  • Splayed supports: legs are set wider than the seat so the stool doesn't tip backward when a guest leans against the backrest.
  • Floor protection: we select glides for the supports according to the flooring — tile, laminate, and parquet require different ones, soft or sliding.

Gas lift and swivel — when they are needed

A gas lift is needed if one model stands at surfaces of different heights or people of different heights sit at the counter: the seat is raised and lowered by a lever underneath. At home this is convenient when both adults and children have breakfast at the island. A swivel mechanism makes it easier to sit down at a counter placed close to a wall or furniture set: the guest sits sideways and turns toward the tabletop without pulling the seat back. Both options usually come on a chrome base with a single central support and a ring footrest. Their common drawback is more moving parts that require regular checking of fasteners. In a venue with dense seating and frequent cleaning, a fixed model is more reliable and quieter: children don't spin it, and it doesn't move from its place at the counter.

Seat, backrest and upholstery of bar stools

The guest touches the seat, backrest and upholstery, so their construction determines how long the stool will last without reupholstery. At home and in a venue the seat layers are the same, while the fabric is chosen according to load and cleaning.

What we build the soft seat from

The base of our soft seat is a plywood frame, on top high-density PU foam, then upholstery that is stretched and fastened in the soft furniture section of our workshop. Plywood doesn't crumble around fasteners, so the seat stays on the frame without play even after frequent use. Dense polyurethane foam sags more slowly: the edge doesn't collapse, and the guest doesn't feel the frame under the thighs. We select the filler thickness according to the scenario — a stool for short sitting has a thinner layer, a model with a backrest for a long evening has a thicker one. We run the seam and piping around the perimeter so there are no wrinkles at the edge: that is exactly where the upholstery rubs against knees and clothing. The seat on screws can be removed and reupholstered separately without changing the whole frame. From below the seat is closed with fabric or a panel so the fasteners don't catch clothing or scratch knees.

Which upholstery will withstand cleaning and spilled drinks

Upholstery materials by care and placement
UpholsteryCareWhere it fits
Faux leatherwiped with a damp clothbar, coffee shop, kitchen-living room
Contract anti-vandal fabricwashable, withstands frequent cleaningcafe and restaurant with high traffic
Velvetdry cleaning with a brushhome, lounge area
Jacquarddry and foam cleaninghome, restaurant with relaxed seating

Whether a backrest and armrests are needed

A backrest is needed where people sit longer than a cup of coffee: at home by the island, at a bar and in a restaurant lounge area. A low backrest supports the lower back and doesn't block the view of the counter, while a tall carved ash backrest works as a striking interior feature. Armrests add comfort but widen the seating spot and get in the way of pulling up close to the tabletop, so they are fitted where there is plenty of room along the counter. When we make bar stools to order, we show the height and backrest angle on a sample so the guest doesn't press their shoulder blades against the top edge. For a quick-service area — takeaway coffee, a counter by the window — a stool without a backrest or with a low rim is enough: it is lighter, takes up less space and slides under the tabletop faster.

A home model and a model for a bar or coffee shop

At home and in a venue, people expect different things from a tall stool. In an apartment, quietness, looks and a match with the kitchen matter; in a bar and coffee shop, it's the frame's durability, easy cleaning and all seats being identical.

What matters at a kitchen island at home

For an apartment we more often make semi-bar models for a kitchen island or a counter by the units, with a backrest and a soft seat, because people have breakfast at them, work on a laptop and sit with guests. Making bar stools for an apartment starts with measuring the island and choosing an upholstery that can handle crumbs and children's hands. In an open kitchen-living room the seating is visible from the whole room, so we match the frame and fabric with the fronts and the sofa. Quietness matters too: wooden legs and soft pads don't clatter on the tiles late in the evening. If the island stands in a passage, we choose a model that slides fully under the tabletop and doesn't block the way to the fridge. For a family with children, a lower footrest and a seat with a rim that a child won't slip off will work well.

What withstands the flow of guests in a bar and coffee shop

  • Frame: powder-coated steel handles daily rearranging, knocks against the counter and mopping the floor around the legs.
  • Upholstery: faux leather and contract fabrics wash off spilled beer and coffee and don't absorb kitchen smells.
  • No unnecessary gaps: a gap is left between the seat and the backrest that a cloth can pass through, otherwise crumbs and sticky spots build up there.
  • Weight: the stool should be light enough for a waiter to lift onto the counter before cleaning, yet not wobble.
  • Uniformity: all seats in the hall are the same height and color, otherwise the hall looks assembled from different batches.

How to match the color and style of the interior

We select the frame colour and upholstery from the decor and fabric samples in the showroom, and we match the model itself with the tables, counter and fronts already present in the interior. For a loft, black or graphite metal with cognac-tone faux leather works well; for a Scandinavian kitchen, light beech or oak with fabric matching the walls. A classic interior suits ash with a tall carved back, while minimalism calls for a slim frame and a seat without piping. Powder coating gives a choice of frame shade to match the hardware and light fixtures, and solid wood is tinted to match the countertop. To avoid getting the tone wrong, it is best to look at a fabric sample in both daylight and evening light: faux leather and velvet change colour under lamps more than photos suggest.

Bar stools for a café or bar as one series for the whole room

A venue orders tall stools in a batch, and every seat has to come out identical. The batch is agreed in advance, and then it has to match in colour with the rest of the room's furniture and with any future reorder.

Why we make a pilot sample first

For a series, we first make a pilot sample and agree it with the venue owner, and only then do we start the batch. The sample is where we check what a 3D design cannot show: seat height at the actual counter, seat firmness, backrest angle, and fabric shade under the venue's lighting. If the owner asks to raise the footrest or change the piping, the change goes into one unit, not two dozen finished ones. The sample stays as the reference for the workshop: every following stool in the batch is checked against it at final assembly. For a café with a fixed opening date, this step saves time, because fixing one unit is faster than redoing the whole row. Among our 3 500+ projects are 60+ turnkey cafés, and the seating in each of them started with an approved sample.

One series with the room and a reorder later

We make the whole room of a café or restaurant in one series and one decor: chairs, tables, sofas and the counter come out of the same workshop and match in the shade of metal, wood and fabric. For the project we draw up one estimate and one contract, and the series gets a wholesale price. Bar stool production in the same series can be repeated later: if the venue extends the counter or opens a summer terrace, we make the reorder in the same frame colour and the same fabric. To make sure the reorder matches, keep the fabric name and frame colour from the contract — the supplier's fabric batches can differ slightly in shade. One contractor for all the furniture in the room saves you from having to match different suppliers to each other by height and colour.

How we work with companies and sole traders

  • Contract and invoice: with companies and sole traders we work by contract and invoice with bank transfer, and the amount is fixed in the project estimate.
  • Deposit: 50 % is paid when the order is launched, and the remaining 50 % after the acceptance certificate is signed at the site.
  • Closing documents: after installation we hand over the acceptance certificate and the delivery note — everything the venue's accounting needs.
  • One estimate: the room's chairs, tables and counter go on one estimate and one contract, with no separate invoices for each item.
  • Installation timed to the opening: we schedule delivery and placement by our own crew around the venue's opening date so we don't get in the way of the renovation.

Ordering bar stools from measurement to installation

An order with the manufacturer goes through a single chain, where one team is responsible for dimensions, production and installation. The stages, pre-dispatch checks and contract terms follow in order, with no passing the order between contractors.

Stages from the first message to installation

Order journey and who is responsible at each step
StageWhat happensWho does it
Messagephotos of the space, counter dimensions, wishesmanager
Measurementcountertop height, counter length, walkwaymeasurement specialist
3D designlayout of seats and model selectiontechnologist
Samplepilot piece of the seriesworkshop
Manufacturingframe, painting, upholstery, test assemblyworkshop
Installation and acceptancedelivery, placement, signing of the acceptance reportour own crew

What we check before dispatch

Custom-made bar stools finish in our workshop with a test assembly: every stool is fully assembled before dispatch, not for the first time on site. We check that the frame does not wobble on a flat slab, that the welds and powder coating have no gaps, and that the footrest sits at the specified height. The seat is checked by sitting on it: upholstery without wrinkles at the edge, even piping, fasteners tightened and not protruding underneath. On a series, each piece is compared with the approved sample for height and shade. The gas lift and swivel mechanism are run through their full travel so the seat does not stick or sink on its own. This order of things moves corrections into the workshop, where there are tools and spare parts, and placement at the counter takes less time. A piece with a deviation goes back to the section instead of going to the customer.

Warranty, lead times and delivery

We give a 24-month warranty on the item under the contract, and the final amount is fixed in the same contract after the free measurement. Lead times for each option are in the price list on this page: they depend on the frame and upholstery, and a rush order is possible. Prices for each option are also in the price list above. Delivery in Almaty and up to 30 km is free for a large order, the threshold is stated on the Delivery and payment page, beyond 30 km there is a surcharge. Our crew delivers and places the furniture, we sign the acceptance report after installation, and only after that is the second part of the payment made. We have been working in the Almaty market for 13 years and do everything ourselves, from measurement to installation, without intermediaries or reselling ready-made furniture.

The bottom line on bar stools

A comfortable tall stool comes together from several decisions, and each is made before the workshop starts. A short list of what to check before ordering.

  • Height: there should be a gap of about 25–30 cm between the seat and the countertop, and it is worth measuring from the lower edge of the surface.
  • Frame: powder-coated steel withstands a flow of guests, solid wood is suitable for home and for a restaurant with calm seating.
  • Footrest and mechanism: a footrest is a must on any tall seating, while a gas lift and swivel are needed only for a specific scenario.
  • Upholstery: fabric is chosen by care — faux leather and contract fabrics for a venue, velvet and jacquard for home.
  • Series: for a hall, one sample is approved first, and then the whole batch and any future reorder are made from it.

12Calculation

How to calculate the cost of bar stools

Choose the model, frame, upholstery and number of seats in the calculator — the calculation will go to the manager on WhatsApp, who will confirm the counter height and send you a quote.

01Type
02Quantity, pcs of identical items
1 pc
130 pcs
03Frame
04Seat
05Options

13For business

What else we make besides bar stools