Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
A wall of office document wardrobes with glazed and solid sections in an office

For business · Offices

Office cabinet catalog in Almaty

We'll make a cabinet to fit your archive or office: free office measurement and a 3D layout project in 1–2 days, the price is fixed in the contract. 24-month warranty on the item under the contract.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 7 days
lead time
24 mo.
warranty under contract

A wall of document cabinets: glass, solid doors and open shelves

02Projects

Our work on filing cabinets in Almaty

Site, scope, materials and lead time — for each project.

  • A wall of glass document wardrobes for the accounting department — MEBLIX project, Nurly Tau Business Center, Bostandyk districtOffice

    Wall of glass-front document cabinets for the accounting department

    Nurly Tau BC, Bostandyk district

    Nine Office-Standard wardrobes in a single line: glass upper section for current folders, solid lower section with a lock for reporting. A single finish — the row looks cohesive, not like a storage room.

    Scope
    9 Office-Standard wardrobes, single finish
    Materials
    Egger 16 mm laminated chipboard, glass, locks
    Lead time
    12 days
    I want the same
  • Floor-to-ceiling sliding wardrobes for a cramped office — MEBLIX project, Esentai City, Medeu districtOffice

    Floor-to-ceiling sliding wardrobes in a tight office

    Esentai residential complex, Medeu district

    Two Slide sliding wardrobes, floor-to-ceiling, in a narrow office: the sliding doors didn't eat up the walkway, inside are shelves for folders and a rail for clothes. Maximum storage in a small area.

    Scope
    2 Slide sliding wardrobes, floor-to-ceiling
    Materials
    16 mm laminated chipboard, sliding profile
    Lead time
    14 days
    I want the same
  • Filing cabinets and bookkeeping wardrobes for the HR department — MEBLIX project, Dostyk Business Center, Medeu districtOffice

    Filing cabinets and accounting cabinets for the HR department

    Dostyk BC, Medeu district

    A set for personnel files: four File-4 filing cabinets for suspension folders and three accounting cabinets with a lock on each section. Access is restricted, documents kept under lock and key.

    Scope
    4 File-4 filing cabinets + 3 Accountant cabinets
    Materials
    16 mm laminated chipboard, locks on sections
    Lead time
    12 days
    I want the same
  • Glass display cases for awards in the meeting room — MEBLIX project, Gagarinsky Business Center, Almaly districtOffice

    Glass display cases for awards in the meeting room

    Gagarinsky BC, Almaly district

    A tall display case with glass doors for awards and a low Meet-Glass credenza for equipment in the meeting room. Cables hidden, trophies on display behind glass and under lock.

    Scope
    Vitrina-Glass display case + Meet-Glass credenza
    Materials
    25 mm laminated chipboard, glass in aluminum frame
    Lead time
    12 days
    I want the same
  • Staff wardrobes in the entrance area — MEBLIX project, Alatau Business Center, Auezov districtOffice

    Wardrobes for staff in the entrance area

    Alatau BC, Auezov district

    Six Garde wardrobes in the entrance area for employees' outerwear: a rail with hangers, a shelf for hats, a lower section for shoes. Clothes are off the chairs, the entrance looks tidy.

    Scope
    6 Garde wardrobe cabinets, rail + shelves
    Materials
    16 mm laminated chipboard, rail
    Lead time
    11 days
    I want the same
  • The executive's wardrobe to match the desk — MEBLIX project, Mega Tower, Bostandyk districtOffice

    Executive wardrobe matched to the desk

    Mega Tower residential complex, Bostandyk district

    A Director executive wardrobe in oak veneer, matched to the executive desk, plus a Corner unit in the same finish. Concealed hardware, soft-close, fronts with no visible handles.

    Scope
    Director wardrobe + Corner unit
    Materials
    natural oak veneer, Blum soft-close
    Lead time
    15 days
    I want the same

03How we work with offices

How ordering a cabinet for documents works

Book a measurement at the office
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 7 days

    Production

    During the measurement we record the room dimensions, skirting height and your preferences for the wardrobe's interior. The layout plan shows how the wardrobe will fit in the office and how many A4 folders will go on the shelves.

  5. 05

    1 day

    Delivery and installation

    We deliver, bring in, assemble, position and adjust the furniture. After installation we clean up after ourselves.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

04Prices

How much custom document cabinets cost

The "from" price is for the item in its basic configuration; the final cost depends on size, interior and hardware. After the free measurement we fix the price in the contract.

  • 50% prepayment, the rest after installation and sign-off
  • Kaspi, card, cash, bank transfer for companies
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • File-4 filing cabinet16 mm laminated chipboard, full extensionfrom 7 daysfrom 38 000 ₸
  • Low-Line low wardrobe16 mm laminated chipboard, plinthfrom 8 daysfrom 40 000 ₸
  • Archive closed cabinet16 mm laminated chipboard, 2 mm PVC edgefrom 9 daysfrom 42 000 ₸
  • Tell two-door wardrobe16 mm laminated chipboardfrom 9 daysfrom 44 000 ₸
  • Office-Standard document wardrobe16 mm laminated chipboard, glassfrom 9 daysfrom 46 000 ₸
  • Mix-Open shelving wardrobe16 mm laminated chipboardfrom 10 daysfrom 49 000 ₸
  • Display-Glass wardrobe with glass doors16 mm laminated chipboard, glass in aluminium framefrom 10 daysfrom 52 000 ₸
  • Combi combined cabinet16 mm laminated chipboard, glassfrom 11 daysfrom 55 000 ₸
  • Corner cabinet16 mm laminated chipboard, radiused frontfrom 11 daysfrom 58 000 ₸
  • Garde wardrobe16 mm laminated chipboard, railfrom 11 daysfrom 60 000 ₸
  • Accountant&#x​27;s cabinet16 mm laminated chipboard, locks on sectionsfrom 12 daysfrom 64 000 ₸
  • Meet-Glass meeting room wardrobe25 mm laminated chipboard, glassfrom 12 daysfrom 66 000 ₸
  • Secure wardrobe with a safe compartment25 mm laminated chipboard, reinforced compartmentfrom 13 daysfrom 72 000 ₸
  • Slide office sliding wardrobe16 mm laminated chipboard, sliding profilefrom 14 daysfrom 78 000 ₸
  • Director executive wardrobeMDF enamel or natural veneerfrom 15 daysfrom 95 000 ₸

05For legal entities

We supply filing cabinets to businesses with contract and invoice

We work with LLPs and sole proprietors on bank transfer. Price, materials and lead times are set in the contract before production begins.

Request a contract and invoice
  1. 01Contractprice, materials, lead times and installation date — before we start
  2. 02Estimate and 3D designfree, within 1–2 days after measurement
  3. 03Invoice for paymentbank transfer for LLPs and sole proprietors
  4. 04Closing documentsacceptance certificate and delivery note after installation
50%
deposit, balance — after the acceptance certificate
Bank transfer
for LLPs and sole proprietors; private clients — card and cash
24 mo.
warranty on items per the contract
Package
from a single workstation to a whole floor — one estimate and one contract
Repeat order
in the same Egger or Kronospan finish later

06Principles

Why it's better to order archive furniture as a custom project

  1. 01

    Shelves rated for the weight of paper

    Folders with documents put serious load on a shelf. That's why we calculate shelf spacing and part thickness for the A4 format and the weight of the archive, not for a standard height.

  2. 02

    Edge and end protection against moisture

    We finish the ends of shelves and the base with 2 mm PVC edge banding: it keeps moisture out of the board and protects against chips when folders are moved, extending the wardrobe's service life in the office.

  3. 03

    Sturdy plinth

    The plinth gives the wardrobe stability and protects the lower folders from moisture when the floor is washed. The plinth height is chosen so the doors don't catch on the skirting.

  4. 04

    Cable entries for equipment

    If a printer or network equipment will be placed in the wardrobe, we provide cable channels and hatches for wires. This eliminates messy holes made after installation.

  5. 05

    Different section heights for folders and equipment

    Alternating tall sections for A4 folders and low ones for a printer or filing cabinet lets you store both archives and equipment in one wardrobe without extra shelves and gaps.

  6. 06

    Ventilation of paper sections

    Gaps between the doors and the carcass and ventilation holes in the back panel prevent moisture from accumulating in a closed wardrobe, keeping paper dry.

A stack of Egger and Kronospan laminated chipboard sheets in our workshop's warehouse before cutting office furnitureA CNC machine cuts a laminated chipboard sheet into office furniture parts according to the drawingsAn edgebanding machine seals the ends of parts with PVC edge in the MEBLIX workshop in AlmatyA craftsman coats MDF fronts with enamel in our workshop's spray boothA craftsman checks the test assembly of an item in the workshop before shipping it to the client's officeThe finished low wardrobe item after assembly in the client's office

01 / 06

07Production

How cabinet furniture is born in our workshop

Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.

  1. A stack of Egger and Kronospan laminated chipboard sheets in our workshop's warehouse before cutting office furniture
    01

    Egger · Kronospan · E1

    Board

    Egger and Kronospan boards of emission class E1 arrive at the workshop warehouse. Laminated chipboard decors — 40+, thickness 16–18 mm. Class E1 — for offices and studies.

  2. A CNC machine cuts a laminated chipboard sheet into office furniture parts according to the drawings
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the drawings, and the machine cuts the board to them. Dimensions come from a laser measurement accurate to 1 mm.

  3. An edgebanding machine seals the ends of parts with PVC edge in the MEBLIX workshop in Almaty
    03

    Blum · Hettich · Boyard

    Edging and drilling

    The edge-banding machine seals the edges, then we drill holes for Blum hinges and Hettich runners.

  4. A craftsman coats MDF fronts with enamel in our workshop's spray booth
    04

    Any RAL colour

    Enamel and veneer

    A finishing specialist paints fronts according to RAL — matte and gloss. For a document wardrobe, precise carcass geometry matters: cutting and 2 mm PVC edge banding on the machine give even shelves that don't sag under the weight of folders.

  5. A craftsman checks the test assembly of an item in the workshop before shipping it to the client's office
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the modules in the workshop before dispatch, checking front gaps and drawer travel. The quality control department signs the item off for shipping.

  6. The finished low wardrobe item after assembly in the client's office
    06

    Installation to fit the office schedule

    Finished item

    We deliver, bring in, assemble in 1 day, adjust the furniture and clean up after ourselves. Warranty 24 months from signing the acceptance act.

08Team

Who will make your furniture for paper storage

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

09FAQ

Frequently asked questions about custom document cabinets

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01How can a legal entity pay for a document wardrobe?

For LLPs and sole proprietors we work under a contract with an invoice for bank transfer. Payment scheme — 50% prepayment and 50% after signing the acceptance act. We provide the act and the waybill as closing documents for accounting.

02Do you deliver wardrobes in Almaty and outside the city?

Within Almaty and up to 30 km from the city, delivery is free if the order is large — the threshold is stated on the Delivery and payment page. Beyond 30 km we charge extra per kilometer. Our own installation crew delivers and assembles the wardrobe.

03Can the wardrobe be installed outside office hours?

Yes, we agree the installation time to fit the office schedule. The installation crew is in-house, so the wardrobe can be installed before opening or after closing so as not to disturb employees.

04What warranty applies to a document wardrobe?

Under the contract, the item itself has a 24-month warranty. Blum hardware is covered by a 25-year manufacturer's warranty; for Hettich and Boyard, the terms are set by their manufacturer.

05Can I order a wardrobe for a non-standard ceiling height?

Yes, during measurement we take the room height into account and make the wardrobe to custom sizes. This lets you use the space up to the ceiling and avoid gaps.

06Can locks be fitted on only some of the sections?

Yes, locks are installed on individual sections or cabinets. This way you can restrict access to confidential folders while leaving the other shelves open for employees.

07How much weight can the wardrobe shelves hold?

We calculate the load for A4 format and archive weight: shelf spacing and part thickness are selected individually. At the measurement stage, specify how many folders will be on a shelf so the specialist can allow the needed margin.

08What is included in the free office measurement?

Office measurement and a 3D workplace layout project are free within 1–2 days. During measurement we record the room dimensions and your wishes for the wardrobe's interior.

09Do you work with wholesale and complete orders?

We handle orders of any volume — from a single workplace to an entire floor in a unified decor. You get a single estimate and one contract for the whole set, and a later additional order is made in the same decor.

10Where can I see document wardrobes in person?

Samples are available in the showroom in Almaty; we bring samples to the measurement. In the showroom you can touch Egger and Kronospan laminated chipboard, check how Blum hardware moves and compare finish shades.

10Reviews

Reviews of document cabinets

4,9

average rating
on Google and Zoon

See all reviews

11Article

Custom document cabinets in Almaty from MEBLIX

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

MEBLIX makes custom document cabinets to the dimensions of your office in Almaty. Carcasses in Egger and Kronospan laminated chipboard, MDF fronts in enamel and veneer, Blum, Hettich and Boyard hardware, locks and cable channels. Measurement and 3D design in 1–2 days, installation by our own team, 24-month warranty on the item under the contract.

How to choose a cabinet for document formats and office dimensions

A cabinet starts not with the front but with what will be stored inside. Folder formats set the depth, shelf height and number of sections, while office dimensions set the carcass size.

What depth is needed for A4 folders and lever arch files

We calculate carcass depth from the folder format: A4 ring binders need less depth, while lever arch files with a wide spine need more room so they don't press against the door. A 16–18 mm carcass in Egger or Kronospan laminated chipboard holds a shelf with dense filing without sagging when the section spacing is calculated for the weight of the paper. During measurement, our technicians measure not only the niche but also how the files sit on the shelf — spine out or edge out — because the usable depth depends on it. Leaving a margin for future formats makes such furniture last longer — technicians allow for it at the 3D design stage, not after manufacturing. This margin costs less than reworking a finished carcass.

How many shelves and what spacing between them

  • Adjustable shelves: shelf supports let you change the spacing for folder and box heights without replacing the carcass.
  • Number of sections: we count by the number of storage units in a row and by room height, not by front width.
  • Bay height: for boxes and non-standard units we allow a taller bay, for thin ring binders a shorter one.
  • Archive zone: the heaviest files go in the lower sections, the upper ones are left for current matters.
  • Fixed spacing: saves on shelf supports, but a year later it can't be adjusted for a new format.

A cabinet for the archive, reception and a small office

We change the configuration for each scenario: for the archive — more sections and shelves, for reception — combined doors, for a small office — a narrow full-height carcass. In reception, the open part with shelves for current papers combines with a closed section for documents with restricted access, and we fit locks on doors and cabinets. For the archive, storage density matters more: narrow sections with adjustable shelves give more linear metres on the same floor area. In a small office, a tall narrow cabinet is better than a wide low one — it takes up less floor space for the same storage volume. We make such office furniture — document cabinets — to room dimensions, and lead times for each option are listed in the price on this page.

Carcass and front materials for a document cabinet suited to office tasks

The material determines both how the cabinet looks in the interior and how it withstands daily load. We break down the options we work with in the workshop and the office zones where each is appropriate.

Egger and Kronospan laminated chipboard for work areas

For work areas and archives we make carcasses from Egger and Kronospan E1-class boards 16–18 mm thick with 2 mm PVC edge banding. We use Egger boards for décors with pronounced wood grain, and Kronospan for solid-colour and light surfaces in reception areas and staff zones. We apply the edge banding on our own machine in the workshop, so the ends come out even along the entire length of the shelf and side panel. Class E1 means regulated formaldehyde emission — for offices with permanent workstations this is a basic requirement. The 2 mm edge protects the end from chipping during rearrangements: with thin edge banding it is the ends that lose their look first, especially when the carcass is moved across carpet or tile. As part of office furniture, such items made from this material are the most practical option for high-traffic spaces.

Enamel and veneer MDF for the executive office

For the executive office we finish the fronts in enamel MDF and natural veneer — these materials give a smooth surface and deep colour. We sand and paint the MDF in the workshop: the enamel goes on in an even coat without orange peel, and we match the colour to a sample from the RAL palette. We glue the veneer onto the board and coat it with lacquer, preserving the live grain pattern — oak, walnut or ash looks more substantial than any printed décor. We mount the enamel and veneer doors on Blum hinges with soft-close so the leaf closes smoothly and without a bang. Enamel and veneer need careful handling near damp areas, so in a busy reception a board carcass is the better choice, while the premium finish is kept for the office — that way the front keeps its look longer.

Comparing materials by office scenario

carcass and front materials by office zone
MaterialWhere it fitsWhat it gives
Egger laminated chipboardwork areas, archivedurable surface, load resistance
Kronospan laminated chipboardreception, staff zoneeven décor, practicality
Enamel MDFexecutive officesmooth front, deep colour
Natural veneerexecutive officelive wood texture

Doors, locks and storage organisation inside the document wardrobe

Inside a wardrobe, documents should not just sit there — they should be quick to find. We break down the doors, locks and interior fittings that solve this task in the daily work of an office.

Hinged or sliding doors

In offices we most often fit hinged doors on Blum hinges — they give full access to the shelves, while sliding doors save space in a narrow passage. We source hinges and drawer runners from Blum, Hettich and Boyard: each line has its own service life and feel of movement. On hinged leaves we fit soft-close so an employee does not slam the door in a shared area. A sliding system takes up part of the carcass depth for the runners, so a deeper carcass is allowed for it — otherwise usable volume suffers. In a reception where the passage between desk and wall is narrow, sliding leaves win on ergonomics, while in an office with room to spare hinged doors are more convenient for frequent access. During installation we check that the leaf does not catch neighbouring furniture when fully open.

Lock on doors and cabinets in an open zone

In the open area we install locks on doors and cabinets — this restricts access to documents when there is a flow of visitors in the office. We mortise the lock into the front at the manufacturing stage; on a finished carcass, a hole for the mechanism can no longer be made neatly. In custom items, there is usually one lock per leaf or a common lock for a pair of doors via a rod. In cabinets for the printer and stationery, we lock the drawers with papers, leaving shelves for consumables open. A lock on the door does not interfere with daily work if the key is kept by the responsible person rather than every employee — otherwise the point of locking is lost. At the measurement stage, we clarify how many keys are needed and to whom they should be issued, so that duplicates do not have to be purchased after handover.

Shelf zoning, glass and cable channels

  • Zoning by formats: we mark out shelves for A4 folders, registrars and trays, setting the spacing based on the height of specific documents.
  • Glass doors: we make display sections with lighting for awards, samples and folders that should be visible to visitors.
  • Cable channels: in carcasses with equipment, we provide channels and ports for wires so that cables do not get tangled with papers.
  • Adjustable shelves: some shelves are mounted on shelf supports — the height can be changed when the composition of documents changes.
  • Reinforced shelves: for heavy registrars we add a shelf with greater load capacity and a support in the center of the span.
  • Built into the project in advance: cable channels and wire ports are calculated before cutting — drilling a finished carcass neatly will no longer be possible; we agree on the outlet points during measurement together with the equipment layout.

Custom-size document wardrobe and office built-in

A ready-made carcass rarely fits into a niche or wall recess without gaps and trimming of architraves. We explain how we adjust the item to a specific room — from measurement to on-site assembly.

Non-standard floor-to-ceiling height and into a niche

We manufacture office document wardrobes of non-standard height — the carcass is made to the actual dimensions of the room after measurement. The technician records the height to the ceiling, the width of the wall recess, protrusions of ventilation and skirting boards, as well as gaps at the walls, so that the doors open without hitting the slopes. It is more convenient to assemble a floor-to-ceiling structure from sections that are brought in piece by piece: a solid tall carcass may not fit through a narrow passage or into a stairwell, and then it is lifted element by element and pulled together on site. Before ordering, office measurement is free with us, and we prepare a 3D layout of workstations in 1–2 days — we use this data to build the carcass drawing. The height of a floor-to-ceiling section should be limited so that an installation gap remains above the carcass for tightening and adjusting the supports.

How to fit a wardrobe into the office interior

We select the decor of the carcass and front to match the existing furniture, and when completing a set, we make the model in the same decor as the rest of the office furniture. The technician matches the shade of Egger or Kronospan laminated chipboard with samples of desks and cabinets, and for the manager's office offers MDF in enamel or veneer — they combine with panels and shelving of the same series. A repeat order in the same decor is possible later, so the shade is recorded in the project: different batches of laminated chipboard may differ in tone, and a year later it is more difficult to add a section in the right color without a note in the specification. Our advice is to keep the decor article number and batch number from the contract: with them, the workshop will reproduce the coating more accurately.

Wardrobe complete with other office furniture

As part of office furniture, we make document wardrobes in the same finish as cabinets, desks and racks — from a single workstation to a whole office floor. We handle a complete order with one estimate and a single contract for the entire set: this makes it easier to coordinate lead times, installation and any follow-up order when you need to add another section or a carcass in a new office. A single specification for finish, 2 mm PVC edge banding and Blum, Hettich, Boyard hardware removes the risk that a new cabinet turns out half a shade darker than the old carcass. We pre-assemble such a set in our workshop before dispatch, and we schedule installation around the office's working hours so that visitor reception and employees in the open area are not disrupted.

How ordering a document wardrobe works for LLPs and sole proprietors

For a legal entity, it is not just the furniture that matters but also the paperwork around the order. Here are the stages from the first measurement to the signed acceptance certificate.

Measurement and 3D design in 1–2 days

We measure the office free of charge and prepare a 3D layout design in 1–2 days — it shows how the carcass will fit into the room. A MEBLIX technician arrives with a tape measure and a laser distance meter, takes the dimensions of the niche, the ceiling height and the wall thickness, and then transfers the figures into the design with reference to the workstations. During the measurement it is important to show where the sockets run, how the adjacent doors open and where the ventilation leads — these points affect the depth of the carcass and the side the doors open from. If the office already has furniture, the design will show what needs to be moved so that the item does not block the passage. Before signing off the design, go through it together with the technician and check every mark at the walls — a measurement error costs more than an extra hour of coordination.

Contract, invoice and 50 percent prepayment

We work with legal entities under a contract and an invoice with bank transfer payment: 50 % prepayment, the balance after the acceptance certificate is signed. In the contract we fix the carcass configuration, materials, hardware and lead times according to the price list, so the accounting department does not have to reconcile items by correspondence. We issue the invoice to an LLP or sole proprietor, payment goes through bank details, and we prepare the closing documents — the certificate and the delivery note — by the handover date so they do not have to be requested separately. For a complete order — from a single workstation to an office floor in one finish — we draw up one estimate and one contract for the whole set. A follow-up order in the same finish later goes through a separate invoice, but with materials already agreed. Send us your bank details and company card before signing — this way the invoice and contract come out right the first time, without corrections.

Installation around the office schedule and the acceptance certificate

Installation is carried out by our own team, we agree the time around the office's working hours, and we sign the acceptance certificate after installation. It is best to start coordination a few days before the date: if the office is receiving visitors or a call center is operating, the installers come in the agreed window and do not disturb employees. Our own team delivers the item pre-assembled, places it according to the design, levels it and checks the movement of the doors and locks on site. Lead times depend on the model and material — for each option they are stated in the price list on this page, and rush orders are possible. Before signing the certificate, open and close every door and check the locks and shelves — it is easier to note any issues right away while the team is on site.

Why customers order from a direct manufacturer

When a wardrobe is made in our own workshop rather than resold ready-made, the person who assembled it is responsible for the quality. Here is what this gives the customer at every stage.

Own 600 m² workshop and pre-assembly check

We produce cabinet furniture in our own 600 m² workshop in Almaty: laminated chipboard cutting, 2 mm PVC edge banding, MDF painting and a test assembly before dispatch. Carcasses are assembled from Egger and Kronospan E1-class laminated chipboard 16–18 mm thick, and fronts for executive offices are made from enamel-painted MDF and natural veneer. Cutting and edge banding run on our own equipment, so we check the geometry of the parts before assembly, not on site. The test assembly in the workshop catches errors before we travel to the client — fixing a mismatch on site is harder and takes longer: the part has to be taken back and re-cut. For installation, the team arrives with an already checked carcass and knows exactly how it will fit into the opening.

Warranty and Blum hardware

We give a 24-month warranty on the item under the contract, and Blum hardware carries the manufacturer's 25-year warranty. Blum hinges, lift mechanisms and drawer runners are fitted to doors and internal drawers; Hettich and Boyard have their own terms, and their period is set by the manufacturer itself. We select locks for doors and cabinets to match the access regime in the office, and cable channels and wire hatches are included in the design in advance. The manufacturer's warranty covers Blum hardware specifically, not the entire range — worth keeping in mind when choosing. We fix the terms for our item in the contract, so any disputes are settled by the document, not from memory. This approach also removes uncertainty for the client's accounting: we prepare the closing documents together with the acceptance certificate.

Experience and delivery in Almaty

We have been on the Almaty market for 13 years and have completed 3 500+ office furniture projects, delivering within the city and up to 30 km free of charge for a large order. Within office furniture, these items are ordered together with desks, cabinets and meeting tables — so the carcass decor matches, and later reorders are made in the same material. Delivery and installation are handled by our own team, and we agree the work time with the office schedule so the reception area is not interrupted. Urgent orders are possible, and the lead time for each option is in the price list on this page. The large-order threshold is stated on the Delivery and payment page — it is worth checking before placing an order so you do not have to recalculate logistics afterwards or change the terms of an already agreed estimate.

The bottom line on filing cabinets

We have gathered in one place what determines the result when ordering such a wardrobe: the logic of dimensions, the choice of material and the procedure for handling documents.

  • Dimensions from the contents: depth and the number of shelves are calculated from the formats of folders and registrars, not from the dimensions of a finished model.
  • Material for the zone: for work offices and the archive, Egger or Kronospan laminated chipboard is used; for the executive office, enamel-painted MDF and veneer.
  • Equipment in advance: locks, glass and cable channels are included in the design before the carcass is cut, otherwise rework starts from scratch.
  • Non-standard dimensions: custom sizes allow the carcass to be built into a niche, a wall pier or floor-to-ceiling without gaps.
  • Documents for a legal entity: measurement, 3D design, contract, prepayment, installation and acceptance certificate — these stages are fixed before work starts.

12Calculation

How to calculate the dimensions of a cabinet wardrobe for papers

In the calculator, choose the wardrobe type, width and height, carcass material and interior — shelves, trays or a rail. The finished calculation goes to the manager on WhatsApp, who will clarify the details and prepare a quote.

01Type
02Quantity, pcs of identical items
1 pc
130 pcs
03Carcass
04Fronts
05Hardware
06Options

13Office furniture

What else we make besides filing cabinets

Office furniture

We design and make cabinet furniture for offices with precise fit into the space and a consistent decor on every floor.

Office tables

We design workstations to fit the office layout and the tasks of employees: measurement and a 3D layout project are free, and the price is fixed in the contract before work starts.

Office wardrobes

We design and make office wardrobes for your documents, equipment and clothing, fitting into a niche with the required number of sections.

Wardrobes for clothes

A wardrobe for the niche of a reception or changing room keeps things tidy and protects employees' clothes from dust.

Office cabinets

We make cabinets to fit your desk and tasks: with a lock, for office equipment or as a filing unit.

Office sofas

We design and make sofas for receptions, waiting areas and meeting rooms: free measurement with fabric samples and a 3D project in 1–2 days, with the price fixed in the contract.

Executive office

We design and manufacture an executive office to suit the manager's tasks: meetings, document storage, a rest area.

Executive desk

We design and make a desk for the director's office with a free measurement and a 3D layout project in 1–2 days.

Table with a meeting extension

An executive desk with a briefing extension brings a meeting and a workplace into one line without taking up extra meters.

Meeting tables

We design and make meeting tables to fit the dimensions of your room.

Reception furniture

We furnish a reception to fit your office: a counter, sofas, tables and a wardrobe in a single decor.

Staff furniture

We design workstations to fit the office layout: free measurement and a 3D layout project in 1–2 days, with the price fixed in the contract.

Loft office furniture

We furnish an office in a single decor: workstations, meeting rooms, reception and rest areas.

Loft tables

A loft table on a steel frame with a wooden or laminated chipboard top solves the workstation task without losing the office style.