Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
Species
oak, ash, beech, alder, walnut
Drying
up to 8–10 % moisture
Price
from 85 000 ₸
In the price list
15 items

Custom solid wood furniture in Almaty

We design and make cabinet and upholstered solid wood furniture to fit your space. Measurement and 3D design are free, the price is fixed in the contract, and the item warranty is 24 months.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 7 days
lead time
24 mo.
warranty under contract

02Principles

What makes our workshop different

  1. 01

    We select slats by pattern and tone

    For the panel we select blanks of the same species and similar tone, glue them with waterproof glue and use tongue-and-groove or smooth jointing — this reduces the risk of warping and makes the pattern even.

  2. 02

    We install hardware from trusted brands

    Blum and Hettich hinges, runners and lift mechanisms are designed for decades of daily use; Blum hardware carries a 25-year manufacturer's warranty.

  3. 03

    We pre-assemble each item in the workshop before delivery

    A test assembly catches warping and mismatched joints before the furniture reaches you; only a verified structure goes to site.

  4. 04

    We account for the geometry of the room

    Walls and corners in apartments are rarely perfectly straight, so we design after measuring and allow compensation gaps for skirting boards and unevenness.

  5. 05

    We match the finish to the load

    We finish kitchen countertops and fronts with lacquer, and bedroom and children's furniture with oil: the finish can be refreshed locally without a full repaint.

  6. 06

    We design for disassembly

    If an item won't fit through a doorway or into a lift, we make it collapsible: we agree the fasteners and assembly sequence on site before launch so installation goes without rework.

03Prices

How much does custom wooden furniture cost

The "from" price is for an item in the base configuration or per linear metre of width — for kitchens and bar counters. The price includes the carcass, fronts and Blum and Hettich hardware; the final amount is fixed in the contract after a free measurement.

  • 50% prepayment, the rest after installation and sign-off
  • Kaspi, card, cash, bank transfer for companies
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • Solid wood chest of drawersoak/​beech14 daysfrom 85 000 ₸
  • Solid wood dining tableoak/​ash14 daysfrom 90 000 ₸
  • Solid wood bedpine/​oak14 daysfrom 90 000 ₸
  • Solid wood kids&#x​27; roompine/​beech16 daysfrom 110 000 ₸
  • Solid wood wardrobesolid wood, panel18 daysfrom 120 000 ₸
  • Solid wood kitchenoak/​ash20 daysfrom 180 000 ₸
  • “Car” kids bed in solid birchbirch, 160×​80 cm7–10 daysfrom 120 000 ₸
  • Solid walnut deskwalnut, 160×​80 cm7–10 daysfrom 180 000 ₸
  • Solid oak bar counteroak10–14 daysfrom 200 000 ₸/⁠lin. m
  • Oak kitchen unit with framed frontsoak14–20 daysfrom 250 000 ₸/⁠lin. m
  • Round solid beech dining tablebeech, 120 cm7–10 daysfrom 280 000 ₸
  • Solid alder sliding wardrobe with mirrored doorsalder, 240×​220 cm10–14 daysfrom 350 000 ₸
  • Double bed in solid ash with an upholstered headboardash, 180×​200 cm10–14 daysfrom 420 000 ₸
  • Three-door hinged wardrobe in solid oakoak, 240×​230 cm10–14 daysfrom 480 000 ₸
  • Corner kitchen in solid pine with painted frontspine, 3000×​2200 mm14–21 dayfrom 950 000 ₸

04Projects

Completed solid wood furniture projects

01 / 08
Kitchen — MEBLIX project, Esentai City residential complex, Bostandyk district

01 / 08

Kitchen

Esentai City residential complex, Bostandyk district

Kitchen with solid oak fronts, brushed, oiled. Warm texture and the status of natural wood.

Items
oak fronts, 4.2 m
Materials
solid oak
Lead time
24 days
I want the same
Dining table — MEBLIX project, Nova City residential complex, Bostandyk district

02 / 08

Dining table

Nova City residential complex, Bostandyk district

Table made of solid ash with a light, graphic grain. Sturdy, light, for the whole family.

Items
180×90, seats 6
Materials
solid ash
Lead time
14 days
I want the same
Bed — MEBLIX project, Abu Dhabi Plaza residential complex, Medeu district

03 / 08

Bed

Abu Dhabi Plaza residential complex, Medeu district

Solid oak bed with a high headboard and drawers. A frame that doesn't creak and serves for generations.

Items
180×200, headboard
Materials
solid oak
Lead time
16 days
I want the same
Chest of drawers — MEBLIX project, Samal-2 microdistrict, Medeu district

04 / 08

Chest of drawers

Samal-2 microdistrict, Medeu district

Chest of drawers made of solid beech with an even, light grain. Drawers on Blum soft-close runners.

Items
6 drawers
Materials
solid beech
Lead time
14 days
I want the same
Bedroom — MEBLIX project, Orbita-3 microdistrict, Bostandyk district

05 / 08

Bedroom

Orbita-3 microdistrict, Bostandyk district

Bedroom set made of solid pine, tinted to look like walnut. An affordable natural option.

Items
bed + bedside cabinets
Materials
solid pine
Lead time
16 days
I want the same
Elm slab table — MEBLIX project, Izumrudny Kvartal residential complex, Bostandyk district

06 / 08

Elm slab table

Izumrudny Kvartal residential complex, Bostandyk district

Dining slab table made of elm with a live edge on a metal base. Every pattern is unique.

Items
live edge
Materials
solid elm
Lead time
18 days
I want the same
Desk — MEBLIX project, Almaty Arena residential complex, Alatau district

07 / 08

Desk

Almaty Arena residential complex, Alatau district

Solid oak desk for a home office. Warm wood instead of laminated chipboard.

Items
140×70
Materials
solid oak
Lead time
14 days
I want the same
Kids furniture — MEBLIX project, Aksai-4 microdistrict, Auezov district

08 / 08

Kids furniture

Aksai-4 microdistrict, Auezov district

Children's room made of solid pine with no harsh odours, water-based finish. Eco-friendly and durable.

Items
bed + desk
Materials
solid pine
Lead time
16 days
I want the same

3 500+

MEBLIX projects since 2013 — we'll show you similar ones on WhatsApp or in person at the showroom.

Show similar

05How ordering works

How ordering works wooden furniture

Book a free measurement
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 7 days

    Production

    Before production starts, you approve the drawing, the wood species, the finish tone and the hardware. At this stage changes are possible without reworking a finished item. Lead times for each option are in the price list on this page, and rush orders are possible.

  5. 05

    1 day

    Delivery and installation

    We deliver, carry in, assemble, position and adjust the item. After installation we clean up after ourselves.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

MEBLIX carpentry workshop in Almaty: workbenches, blanks and machines for working with woodA CNC machine cuts blanks for future furniture according to the designer's drawingsA machine in the workshop processes part edges and drills holes for hinges and runnersA craftsman applies oil and lacquer to fronts in the spray booth of our workshopA craftsman checks the control assembly of the item in the workshop before shipping to the customerA finished solid wood wardrobe with paneled doors and a table in the room

01 / 06

06Production

What happens in the production facility

Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.

  1. MEBLIX carpentry workshop in Almaty: workbenches, blanks and machines for working with wood
    01

    Drying to 8–10 %

    Solid wood

    For solid wood furniture the joinery area matters: here boards are cut and planed, fronts are milled and parts are sanded before painting.

  2. A CNC machine cuts blanks for future furniture according to the designer's drawings
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the drawings, and the machine cuts the board to them. Dimensions come from a laser measurement accurate to 1 mm.

  3. A machine in the workshop processes part edges and drills holes for hinges and runners
    03

    Blum · Hettich · Boyard

    Edging and drilling

    The edge-banding machine seals the edges, then we drill holes for Blum hinges and Hettich runners.

  4. A craftsman applies oil and lacquer to fronts in the spray booth of our workshop
    04

    Any RAL colour

    Enamel and veneer

    A finishing specialist paints fronts to RAL — matt and gloss.

  5. A craftsman checks the control assembly of the item in the workshop before shipping to the customer
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the modules in the workshop before dispatch, checking front gaps and drawer travel. The quality control department signs the item off for shipping.

  6. A finished solid wood wardrobe with paneled doors and a table in the room
    06

    Installation in 1 day

    Finished item

    We deliver, carry in and assemble in 1 day, adjust the item and clean up after ourselves. The 24-month warranty starts from signing the acceptance certificate.

07Team

The craftsmen behind solid wood furniture

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

MEBLIX showroom on Abylai Khan Ave

08Showroom and workshop

Touch the samples for solid wood furniture in our showroom

200+ fronts and materials, Blum and Hettich hardware to try in person. The workshop is in the same building.

Address
115/60 Abylai Khan Ave, Almaty
Hours
Daily 10:00–20:00
Phone
+7 705 625 00 03

09FAQ

Frequently asked questions about custom wooden furniture to order

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01Can I order solid wood furniture in non-standard sizes?

Yes, we make solid wood furniture to custom sizes. During a free measurement the specialist takes the exact parameters of the room, after which we prepare a 3D design in 1–2 days. Non-standard height, depth or width affects material consumption and the price, which we fix in the contract.

02Which wood species are suitable for the kitchen and bathroom?

Moisture resistance matters for the kitchen and bathroom. Oak and ash handle humidity fluctuations well, beech requires a stable microclimate, and pine and birch are budget options for dry rooms. We use kiln-dried solid wood at 8–10 % moisture, which reduces the risk of warping. For wet areas we recommend protective oils and lacquers.

03How does solid wood differ from veneer, and which should I choose for fronts?

Solid wood is one-piece timber; veneer is a thin slice of natural wood on MDF. Solid wood is stronger and can be restored, while veneer is more economical and more stable under humidity changes. For kitchen fronts, solid oak or ash is chosen more often; for large surfaces, veneer. Both options are in the workshop, and you can compare samples during the measurement.

04How do I care for solid wood furniture so it doesn’t crack?

Solid wood is sensitive to sharp humidity changes and direct sunlight. Maintain moderate indoor humidity, avoid overly dry air from radiators, and do not place furniture right against radiators or sinks. Wipe with a slightly damp cloth without aggressive products, and refresh the oil or lacquer every 1–2 years. For outdoor use, we use larch, teak and thermowood with oil for exterior work.

05Can I see samples of wood species and finishes before ordering?

Yes, we bring samples of wood species, veneer and weaving to the measurement. At the showroom at 115/60 Abylai Khan Ave, you can also look at materials and discuss finishes. We work daily 10:00–20:00, and the samples help you choose the texture and color before production starts.

06What is the service life of solid wood furniture with proper care?

With proper humidity control and protection from direct sunlight, solid wood furniture lasts for decades. Oak and ash are the most durable species; pine and birch are softer and wear faster. Blum hardware has a 25-year manufacturer's warranty, and we give 24 months on the item under the contract.

07Can I order solid wood furniture for outdoor or unheated spaces?

Yes, for outdoor and unheated spaces we use larch, teak and thermowood with oil for exterior work. These species are resistant to moisture and temperature changes. For damp areas, we recommend protective oils and lacquers. During the measurement, you can look at samples and discuss finishes.

08Do you work with designers and architects?

Yes, we work with designers and architects by bank transfer. We accept drawings and sketches and suggest solutions for materials and hardware. Our own 600 m² workshop in Almaty allows us to make furniture to a custom project, including veneering and rattan weaving.

09Can I order just fronts or individual solid wood parts?

Yes, we make individual fronts, countertops, shelves and other solid wood parts. We bring samples to the measurement so you can choose the species and finish. The cost depends on size, species and hardware, and we fix it in the contract after the measurement.

10How do I check the quality of solid wood furniture on delivery?

On acceptance, inspect the surface for chips and cracks, check that doors and drawers work and there are no misalignments. Pay attention to the evenness of the finish and the joints between parts. We sign the acceptance report after installation, once you are satisfied with the quality. We control the moisture of solid wood before cutting, and before shipping we carry out a test assembly in the workshop.

10Reviews

Reviews of solid wood furniture

4,9

average rating
on Google and Zoon

See all reviews

11Article

Custom solid wood furniture in Almaty from the MEBLIX workshop

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

MEBLIX makes custom solid wood furniture in Almaty: our own workshop, free measurement with wood samples and a 3D design in 1–2 days. We work with kiln-dried oak, ash, beech, alder, walnut, birch and pine, fit Blum and Hettich hardware, and install with our own crews.

What people order in wooden furniture made to their own sizes

Solid wood is not just for kitchens. It is used for wardrobes, dressers, shelving, tables and outdoor items, and almost always an order starts with the specifics of the space: niches, sloped walls, ceiling height.

Kitchens, wardrobes and cabinet items made to individual sizes

We make kitchens, wardrobes, dressers and shelving from solid wood strictly to your sizes — for a niche, a sloped wall and a non-standard ceiling height. The carcass is assembled from E1-class FK birch plywood, the fronts from kiln-dried solid oak, ash, beech, alder, walnut and pine, and we fit the drawers and hinges with Blum and Hettich hardware. We design solid wood kitchens and solid wood wardrobes for the specific geometry of the room rather than adjusting a standard module: over 13 years of work in Almaty we have assembled more than 900 kitchens and 800 wardrobes. Non-standard room geometry is no reason to give up on solid wood: at the measurement we record every deviation, and the 3D design shows how the item will fit into the niche before cutting.

Designer wooden items made to your project

Our designer wooden furniture starts with your idea or a reference — the designer turns it into working drawings and a 3D visualization. If you bring a hand-drawn sketch, a photo from an interior or measurements taken from the wall, we refine the proportions, the thickness of the parts and the joinery method, and at the measurement we show samples of wood species, veneer and weaving. Then the item goes through the joinery section, veneering, painting and a test assembly in a 600 m² workshop. Oil and lacquer bring out the grain differently: oil emphasizes the texture and leaves the wood matte to the touch, while lacquer gives a smoother film. The earlier you bring the sketch, the more precisely the species and the finishing method are chosen — the coating changes the character of the wood grain.

Rattan and outdoor items

For the terrace and outdoors we make items from larch, teak and thermowood with oil for exterior work, and from rattan — on an aluminum frame. Natural rattan bends and holds the shape of the weave, polyrattan is more resistant to moisture and temperature changes, so it is more often chosen for open areas. Larch and teak contain natural resins and, without additional impregnation, behave more stably than indoor species, while thermowood undergoes treatment after which it absorbs less moisture. Outdoor items require different protection than indoor ones: the exterior coating is renewed as it wears, otherwise the wood loses its look faster than indoors. Woven items on an aluminum frame are not afraid of rain but need a cover for the winter — the cold does not destroy the frame, but the weave gradually loses its resilience from sharp temperature changes.

Which wood species suits your wooden furniture for your task

The species sets both the look of the item and how it will behave a year from now. We break down what suits which task and why the moisture content of the raw material matters more than it seems.

Oak, ash, beech, alder, walnut, birch and pine — what suits which task

wood species for different tasks
SpeciesBest forCharacteristic
Oakcountertops, fronts, kitchensdense, expressive grain
Ashkitchens, tables, frontsstrong, light, resilient
Beechcarcass, chairs, dressershard, even texture
Alderfronts, shelveslight, warm tone
Walnutdesigner items, frontsdark, decorative
Birchcarcass, interior elementslight, affordable
Pinecarcass, kids furnituresoft, resinous grain

Kiln drying and 8–10 % moisture content

We use kiln-dried solid wood with a moisture content of 8–10 % and check it before cutting — this is the main way to protect the item from warping. Raw wood releases moisture once it is already in your apartment: the board shrinks unevenly, the front twists, and joints open up. Kiln drying evens out moisture across the entire thickness of the blank, and pre-cutting checks weed out batches that have picked up moisture in the warehouse. Even properly dried wood behaves differently depending on the climate in the room, so stable indoor conditions matter no less than drying at the workshop. During the heating season the air in apartments is dry, and wood releases its residual moisture faster — gaps at joints and slight movement of doors are normal during this period. Keep indoor humidity within reasonable limits and do not place the item right next to a radiator — this keeps the geometry stable for longer. If you are planning custom oak furniture, drying and moisture control before cutting matter as much for durability as the species itself.

How solid wood differs from veneer and MDF

Solid wood is whole timber throughout the thickness of the part, veneer is a thin slice of natural wood on MDF, and plywood is glued layers of veneer. Inside solid wood there are no glue layers or film, so edges can be profiled and chamfered without the risk of exposing the core. Natural veneer on MDF gives the same wood grain with less weight and stable panel geometry, while birch FK plywood bears loads in carcasses. The difference shows when refreshing the surface: solid wood can be sanded and re-oiled or re-lacquered many times, whereas veneer has a limited natural layer thickness and is easy to sand through during deep treatment. If you plan to refresh the surface in a few years rather than replace the front, choose solid wood — it has more thickness reserve for sanding.

How ordering wooden furniture works from measurement to installation

Ordering custom solid wood furniture is a sequence of steps where each one builds on the previous. Here is the path from your first inquiry to the signed acceptance report.

Free measurement and 3D design in 1–2 days

We arrive for the free measurement with samples of wood species, veneer and weaving, and we prepare the 3D design in 1–2 days. Measurement specialists record the room's geometry, ceiling height, and the location of sockets and pipes so the design is based on real conditions rather than a standard drawing. In the showroom at 115/60 Abylai Khan Ave you can touch the same samples we bring on site and compare them with the floor tiles or wall color. The measurement is free and commits you to nothing: you can discuss the design, show it to your family, and come back to it later. Samples at the measurement matter more than a catalog on a screen: the shade and grain of wood look different under different lighting in a room than in a photo, and oak under a warm lamp turns honey-toned, while under a cold one it turns gray.

How to get sizes and ergonomics right

We eliminate sizing errors at the measurement: we record openings, slopes, utilities and working heights instead of relying on "approximately." A non-standard wardrobe niche or a ventilation ledge in the kitchen changes the carcass depth and the front opening pattern, so we transfer all parameters into the 3D design to the nearest millimeter. We check ergonomics there too: countertop height for the owner's height, drawer extension, the door opening zone next to a walkway, the distance from the table to the hood. We also run through scenarios separately — how you reach the top dishes, where the door by the wall opens, whether it hits the handle of the neighboring cabinet. Moving a drawer or changing the depth at this stage is easier than after manufacturing — on a finished item such edits mean reworking parts and a new cutting plan for solid wood.

Manufacturing in the workshop, control assembly and installation by our own crews

The item is manufactured in our 600 m² workshop, undergoes control assembly before shipping, and is installed by our own crews. In the joinery area, solid wood is cut and planed, milled and sanded, then the parts go to veneering, painting, oil and lacquer, while woven elements are assembled in the rattan area. We measure the moisture of solid wood before cutting — if the reading is above normal, we send the blank for additional drying, otherwise the finished front will warp after the first heating season. Control assembly in the workshop reveals mismatches before going to the site — fixing them on site is harder and takes longer than in the workshop, where there is neither a workbench nor a stock of parts, and every fitting requires lifting the carcass to the floor again. Rush orders are possible; lead times for each option are in the price list on this page.

Hardware, warranty and ordering wooden furniture under a contract

The buyer checks hardware and warranty last before payment. We show which mechanisms we install on fronts and drawers, how we formalize the deal, and what paperwork we sign upon completion of installation.

Blum and Hettich hardware on fronts and drawers

We install Blum and Hettich hardware on fronts and drawers, and Blum carries a 25-year manufacturer's warranty. We select hinges with soft-close, drawer runners and lift mechanisms based on the front's weight and how the item will be used: for kitchens with daily load we install reinforced series, while standard ones are sufficient for wardrobes and dressers. Blum and Hettich are Austrian and German brands with metal mechanism housings that don't loosen from frequent opening. Custom solid wood furniture starts with selecting hardware for the specific project, and this choice determines how long a solid wood item feels new: drawer smoothness and soft-close are the first to wear out if corners were cut on them. During the measurement, show us where the item will stand and how many people use it — for high loads we'll select more powerful runners.

24-month warranty, 50/50 payment and acceptance certificate

We provide a 24-month warranty on the item under the contract, take a 50% deposit, and the remainder is due upon signing the acceptance certificate. The contract specifies the wood species, dimensions, hardware and finish — everything you agreed on in the 3D design; payment is by bank transfer, with the second half paid once the item is assembled and installed. We sign the acceptance certificate upon completion of installation, and it protects both parties: you record the condition of the item, and we close the order only when everything is in place. Before signing, go through the contract points and check each against what you see on site: evenness of fronts, gaps, operation of soft-close, and color match with the approved sample. It's easier to note a discrepancy in the certificate right away than to prove it later when the crew has already left.

How to check quality before payment

  • Geometry: check right angles, evenness of fronts and tight fit against walls.
  • Gaps: uniformity of gaps between doors and drawers along the entire height.
  • Mechanism operation: smoothness of doors and drawers, operation of soft-close.
  • Color and pattern: match with the sample approved during measurement.
  • Finish: no drips, roughness or unpainted areas in daylight.

Direct manufacturer or intermediary

In the Almaty market, both own workshops and intermediaries take on solid wood items. We explain how to tell one from the other and why it affects the result.

Own 600 m² workshop and own crews versus resale

MEBLIX is a direct manufacturer: measurement, design, production in our own workshop and installation by our own crews, without reselling ready-made items. Our workshop occupies 600 m² in the city: a carpentry area with cutting, planing and milling of solid wood, veneering, painting, oil and lacquer, rattan weaving and pre-shipment assembly control. Custom solid wood furniture goes through all these stages within a single production facility, so we are responsible for the quality of each operation, not a third-party site. An intermediary has no direct control over lead times and quality between you and the workshop — with direct production, issues are resolved at the same area where the item is made. In my workshop view, the difference is visible already at the measurement: we bring samples of wood species, veneer and weaving and immediately discuss details with the craftsman who will handle the order.

What to ask the workshop before ordering

  • Where it is made: the workshop address and the chance to see the joinery, painting and assembly areas for yourself.
  • Who installs it: our own crews or an outside contractor who only shows up for installation.
  • Moisture content of solid wood: how it is checked before cutting and which values are considered working for kiln drying.
  • What is in the contract: the warranty on the item, lead times, payment procedure and the moment the acceptance certificate is signed.
  • Hardware: which brands are fitted on fronts and drawers and what manufacturer warranty they carry.

Made-to-measure or ready-made from a store

Ready-made items from a store are faster, but made-to-measure pieces fit the space more precisely and let you choose the wood species and hardware for the job. In a non-standard niche or a room with recesses, protrusions and slanted corners, a standard module leaves unused zones — an item made to your sizes fills them completely instead of being forced into someone else's template. When you order, you choose kiln-dried solid oak, ash, beech, alder, walnut, birch or pine and Blum or Hettich hardware on fronts and drawers. We don't resell ready-made items — we make them ourselves, from cutting to test assembly. A ready-made option wins when the space is standard and you don't want to wait; in a non-standard opening, made-to-measure saves floor space and nerves during installation.

Caring for solid wood furniture and how wood behaves

Solid wood is a living material, and its condition depends on care and the climate in the room. Here's what to do so the item doesn't dry out and warp.

Caring for natural wood furniture during the heating season

During the heating season the air indoors gets drier, so made-to-measure natural wood items should be kept away from radiators and the humidity monitored. Kiln-dried solid wood arrives for installation at 8–10 % moisture, and in dry air it gradually gives off residual moisture — most noticeable in gaps in the fronts and at countertop joints. Keep the item at least half a metre from radiators and heaters, don't place a humidifier with directed steam nearby, and air the room in short sessions rather than a long draught. A climate guideline is 40–60 % relative humidity: a household hygrometer is inexpensive and shows the real picture better than how it feels. Sharp humidity swings affect solid wood more than consistently dry air — smoothly maintaining the climate matters more than one-off measures. If you are ordering made-to-measure natural wood furniture, it's worth discussing these same care rules with the craftsman at the measurement.

Oil or lacquer — how to refresh the finish

We finish items with oil or lacquer, and refreshing the finish depends on the option you choose — oil needs more frequent care, lacquer lasts longer. An oil finish penetrates the fibres and doesn't form a film on the surface, so it is refreshed with a thin layer every few months in the kitchen and less often on wardrobes in the bedroom; before applying, the area is degreased and lightly sanded. Lacquer provides a protective film and handles damp cleaning without abrasives, but doesn't like alcohol, acetone or hot dishes without a trivet. An oil finish can be refreshed locally on a worn area, while lacquer usually needs the whole surface recoated when damaged. In our workshop we apply both options, and we discuss the choice at the measurement — for the load of the specific item, not "just in case".

What to do if the solid wood does change shape after all

If the solid wood has changed shape, first check the humidity in the room and the operating conditions rather than immediately reworking the item. Measure the air in the room with a hygrometer, and recall whether the piece stood near a radiator or in direct sunlight, whether there was any flooding or sudden ventilation in winter. Small seasonal changes in gaps are normal behaviour for wood, and they often return to their original state once the climate stabilises: give the item two to three weeks at a steady humidity level. If the distortion persists, check the fasteners and the adjustment of the hardware — sometimes the issue is solved by tightening the hinges rather than replacing parts. Under the contract, the warranty on the item is 24 months, so if the deformation is persistent, take photos and contact us: we will identify the cause and propose a solution.

The bottom line on solid wood furniture

Solid wood holds its shape when three things align: a well-chosen species, drying down to 8–10 % and a competent design for the specific room. Below is a short summary of what to check before ordering.

  • Species for the job: oak and ash withstand heavy loads, alder and pine suit lightweight structures, larch and teak are for outdoors; colour is secondary.
  • Moisture content of the solid wood: kiln drying to 8–10 % and a measurement before cutting give a stable item, not a claim on paper.
  • Sizes and ergonomics: measurement and a 3D design eliminate most mistakes before cutting, while changes still cost nothing.
  • Hardware and contract: check the hardware brands, the warranty and the procedure for signing the acceptance certificate before work starts, not after installation.
  • Care: stable humidity in the room extends the life of solid wood better than any one-off treatments — keep it steady all year round.

12Calculation

What the final estimate for a solid wood item depends on

In the calculator, choose the item type and enter the width in linear metres or the number of sections — the calculation will go to the manager on WhatsApp, and they will clarify the details.

01Item

02Size approximate item area, m²

1 m²
1 m²12 m²

03Finish both possible

13Other materials

We also make things beyond solid wood furniture