Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
Straight office desk with a light top on a black metal frame by the window

For business · Offices

Custom office desks in Almaty

We design workstations to fit the office layout and employees' tasks: measurement and a 3D layout project are free, the price is fixed in the contract before work starts. 24-month warranty on the item under the contract.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 7 days
lead time
24 mo.
warranty on the item

Straight table on a metal frame with a cable channel under the countertop

02Projects

Completed projects of office tables

Site, scope, materials and lead time — per project.

  • Bench system for open space — MEBLIX project, Nurly Tau Business Center, Bostandyk districtOffice

    Bench system for open space

    Nurly Tau Business Center, Bostandyk district

    An eight-workstation bench system with a shared cable channel and divider screens. We seated the team close together, but without crowding.

    Scope
    8-seat bench
    Materials
    Egger laminated chipboard, metal frame
    Lead time
    16 days
    I want the same
  • Height-adjustable desks — MEBLIX project, Orbita microdistrict, Bostandyk districtOffice

    Height-adjustable desks

    Orbita microdistrict, Bostandyk district

    Twelve height-adjustable desks for an IT team. Wide tops for two monitors, position memory in the drive.

    Scope
    12 sit-stand desks
    Materials
    Laminated chipboard, electric drive
    Lead time
    18 days
    I want the same
  • Corner workstations — MEBLIX project, Samal microdistrict, Medeu districtOffice

    Corner workstations

    Samal microdistrict, Medeu district

    Six corner desks with mobile cabinets for managers. A large work surface for documents and equipment.

    Scope
    6 corner desks with cabinets
    Materials
    Laminated chipboard, mobile cabinets
    Lead time
    14 days
    I want the same
  • Row of desks for a call center — MEBLIX project, Kcomplex Business Center, Almaly districtOffice

    Row of desks for a call center

    Kcomplex Business Center, Almaly district

    Twenty operator stations with fabric screens between desks — quieter and more private. All in one gray color, the row perfectly straight.

    Scope
    20 operator stations
    Materials
    Laminated chipboard, screens
    Lead time
    22 days
    I want the same
  • Reception desk with a counter — MEBLIX project, Esentai Business Center, Bostandyk districtOffice

    Reception desk with counter

    Esentai Business Center, Bostandyk district

    Reception desk with a raised counter and logo lighting. Inside — space for equipment and drawers, outside — a presentable look.

    Scope
    reception counter
    Materials
    Laminated chipboard, MDF with lighting
    Lead time
    16 days
    I want the same
  • Compact desks for an office — MEBLIX project, Zhetysu microdistrict, Auezov districtOffice

    Compact desks for an office

    Zhetysu microdistrict, Auezov district

    Three compact workstations for a narrow office — we matched the depth to the floor area so there was room to walk. Nothing extra.

    Scope
    3 desks for a narrow office
    Materials
    Laminated chipboard, metal frame
    Lead time
    12 days
    I want the same
  • Meeting room table — MEBLIX project, Nurly Tau Business Center, Bostandyk districtOffice

    Meeting table

    Nurly Tau Business Center, Bostandyk district

    A ten-person meeting table with grommets for sockets and HDMI. Cables run into the floor through a leg duct.

    Scope
    10-person table
    Materials
    Laminated chipboard, socket grommets
    Lead time
    16 days
    I want the same

03How we work with offices

How ordering a table for the office works

Book a measurement specialist for the office
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 7 days

    Production

    In the workshop we assemble the desk on a metal frame, install grommets and cable channels and check the adjustable supports. Lead time — in the price list above.

  5. 05

    1 day

    Delivery and installation

    We deliver, carry in, assemble, set up and adjust the furniture. After installation we clean up after ourselves.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

04Prices

How much office tables made to order cost

The price is per item or per linear meter of bench system width — the unit is stated in each line. We fix the material and configuration in the contract after a free measurement so the estimate doesn't change during the process.

  • 50% prepayment, the rest after installation and sign-off
  • Kaspi, card, cash, bank transfer for companies
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • Staff tableLaminated chipboard, metal frame10 daysfrom 35 000 ₸
  • Operator deskLaminated chipboard, screen12 daysfrom 42 000 ₸
  • Modular workstation for open spaceLaminated chipboard 22 mm, 100×​60 cm7–10 daysfrom 42 000 ₸
  • Linear bench systemLaminated chipboard 25 mm, metal frame7–10 daysfrom 48 000 ₸/⁠lin. m
  • Corner deskLaminated chipboard, cabinet12 daysfrom 55 000 ₸
  • Desk with pedestalLaminated chipboard, mobile pedestal12 daysfrom 60 000 ₸
  • Straight office deskLaminated chipboard 22 mm, metal frame, 140×​70 cm7–10 daysfrom 65 000 ₸
  • Reception deskLaminated chipboard, MDF16 daysfrom 90 000 ₸
  • Bench system for 2 workstations (160×​80 cm)Laminated chipboard, metal legs7–10 daysfrom 92 000 ₸
  • Adjustable deskLaminated chipboard, electric drive14 daysfrom 95 000 ₸
  • Height-adjustable desk with electric driveLaminated chipboard 25 mm, steel base, 120×​60 cm7–10 daysfrom 98 000 ₸
  • Ergonomic corner desk with a monitor cutoutHigh-gloss MDF, 160×​130 cm7–10 daysfrom 115 000 ₸
  • 4-seat benchLaminated chipboard, shared frame16 daysfrom 120 000 ₸
  • Corner desk for an executiveCoated MDF, laminated chipboard, 180×​150 cm7–10 daysfrom 135 000 ₸
  • Bench system for 3 workstations with partitions and cable trays (240×​140 cm)Laminated chipboard, glass, metal7–10 daysfrom 240 000 ₸

05For legal entities

We supply office desks to businesses with contract and invoice

We work with LLPs and sole proprietors on bank transfer. Price, materials and lead times — in the contract before production starts.

Request a contract and invoice
  1. 01Contractprice, materials, lead times and installation date — before the start
  2. 02Estimate and 3D designfree, within 1–2 days after measurement
  3. 03Invoice for paymentbank transfer for LLPs and sole proprietors
  4. 04Closing documentsacceptance certificate and delivery note after installation
50%
deposit, balance — after the acceptance certificate
Bank transfer
for LLPs and sole proprietors; for private clients — card and cash
24 mo.
warranty on items per the contract
Package
from one workstation to a whole floor — one estimate and one contract
Repeat order
in the same Egger or Kronospan decor later

06Principles

Why made-to-measure furniture is better than ready-made

  1. 01

    Adjustable supports for uneven floors

    The supports are set by height, so the desk doesn't wobble on an uneven floor and the joints between countertops in a row stay level even in an old building.

  2. 02

    A mobile cabinet keeps your knees free

    The cabinet on casters rolls under the countertop and frees the work surface from folders, while the employee's legs stay in a free zone.

  3. 03

    Locks on cabinets for personal belongings

    Mobile cabinets lock with a key, so employees' documents and equipment stay secure in a shared open space.

  4. 04

    Stability of a tall cabinet or shelving unit

    The narrow base of a tall module is fixed to the wall so the shelving unit or cabinet doesn't tip over under load or in the aisle between workstations.

  5. 05

    Modular assembly of workstations in zones

    Workstations are assembled from standard modules, so a floor is fitted out gradually, zone by zone, without a full office shutdown.

  6. 06

    Different surface heights for different tasks

    The printing and storage zone is lower, the work zone at standard height, the meeting area its own: each surface for its own process.

Stack of Egger and Kronospan laminated chipboard sheets in our workshop warehouse before cutting for office furnitureCNC machine cuts a laminated chipboard sheet into office furniture parts according to drawingsEdge banding machine seals the ends of parts with PVC edge in the MEBLIX workshop in AlmatyCraftsman applies enamel to MDF fronts in the painting booth of our workshopCraftsman checks the control assembly of the item in the workshop before sending it to the customer's officeFinished work desks with metal frames and partitions after installation in the office

01 / 06

07Production

How each item goes through our own workshop

Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.

  1. Stack of Egger and Kronospan laminated chipboard sheets in our workshop warehouse before cutting for office furniture
    01

    Egger · Kronospan · E1

    Board

    Egger and Kronospan E1 emission class boards arrive at the workshop warehouse. 40+ laminated chipboard decors, 16–18 mm thick. E1 class — for offices and executive rooms.

  2. CNC machine cuts a laminated chipboard sheet into office furniture parts according to drawings
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the drawings, and the machine cuts the board to them. Dimensions come from a laser measurement accurate to 1 mm.

  3. Edge banding machine seals the ends of parts with PVC edge in the MEBLIX workshop in Almaty
    03

    Blum · Hettich · Boyard

    Edging and drilling

    The edge-banding machine seals the edges, then we drill holes for Blum hinges and Hettich runners.

  4. Craftsman applies enamel to MDF fronts in the painting booth of our workshop
    04

    Any RAL colour

    Enamel and veneer

    A finishing specialist paints fronts to RAL — matte and gloss. We edge countertops and carcasses with 2 mm PVC on our own equipment, so the edge holds on the end face and does not come off under daily use.

  5. Craftsman checks the control assembly of the item in the workshop before sending it to the customer's office
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the modules in the workshop before dispatch, checking front gaps and drawer travel. The quality control department signs the item off for shipping.

  6. Finished work desks with metal frames and partitions after installation in the office
    06

    Installation to fit the office schedule

    Finished item

    We deliver, bring in, assemble in 1 day, adjust the furniture and clean up after ourselves. Warranty of 24 months from signing the acceptance certificate.

08Team

Who will make your furniture to measure

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

09FAQ

FAQ about custom office tables

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01Can office desks be paid for by bank transfer from a company or sole proprietor?

Yes, for legal entities we draw up a contract and an invoice, payment is by bank transfer. 50 % prepayment, the second part — after signing the acceptance certificate. Closing documents: the acceptance certificate and the delivery note.

02What is the lead time for office desks?

The lead time depends on the item and material, so for each option it is stated in the price list on this page. An urgent order is possible — tell the manager the date by which you need the workstations. We will fix the exact lead time in the contract after the measurement.

03How much is delivery of desks in Almaty?

For a large order, delivery in Almaty and within a 30 km radius is free, the threshold amount is stated on the "Delivery and payment" page. If the address is further than 30 km, delivery is for an extra charge. Installation is done by our team, we agree the time to fit the office schedule.

04Can desks be ordered for a specific office layout?

Yes, during the measurement we take the dimensions of the premises and prepare a 3D layout of the workstations in 1–2 days. We take into account walkways, sockets and the number of employees. Measurement and design are free.

05What material do you use for countertops and frames?

We assemble countertops and carcasses from Egger and Kronospan E1 class laminated chipboard with a melamine coating: carcass 16–18 mm, countertop 22–25 mm, 2 mm PVC edge. The base is a powder-coated steel frame with adjustable supports. For executive offices, MDF in enamel and natural veneer are available.

06Will a laminated chipboard top hold a monitor and a PC tower?

Yes, a 22–25 mm thick countertop is designed for a monitor, a PC tower and folders. On bench systems the load is distributed by the shared metal frame. If you plan heavy equipment, tell us about it during the measurement.

07What should I prepare for an office measurement?

For the measurement, prepare a floor plan with dimensions, a list of wishes for the number of workstations and access to sockets. The measurement specialist will take exact dimensions and check the walkways. This will speed up the preparation of the 3D layout.

08How is the installation time agreed if the office is working?

We agree the installation time to fit the office working schedule so as not to disturb employees. The team arrives in a convenient time window, we sign the acceptance certificate after installation. We fix the date and hours in advance.

09Can I buy more desks later in the same décor?

Yes, a repeat order in the same decor is possible later. For this we keep the specification of materials and hardware for your project. We process a complete order with a single estimate and a single contract.

10Do you have height-adjustable desks?

Yes, we make an adjustable desk with an electric drive and a desk with an electric height adjustment drive. The height changes to suit the employee's height, you can work standing for part of the day. Choose an option in the price list on this page.

10Reviews

Reviews of MEBLIX office tables

4,9

average rating
on Google and Zoon

See all reviews

11Article

Custom office tables in Almaty from manufacturer MEBLIX

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

MEBLIX makes custom office tables in Almaty in its own 600 m² workshop. Office measurement and a 3D layout of workstations take 1–2 days, installation is done by our own crews, and the item comes with a 24-month warranty under the contract. We work from a single workstation to a whole office floor in one decor.

Sizes and ergonomics of office tables for your space

A non-standard niche or a low windowsill breaks a ready-made project faster than a poor decor choice. That is why we start with a measurement: it is free, and we prepare a 3D layout of workstations in 1–2 days — before anything is finally decided.

How to take dimensions for a table and get the niche right

We start with a free office measurement: the measurement specialist records the niche, protrusions, sockets and walkways, not just the wall length. We work with the width and depth of the niche at three points, the windowsill height, the radiator projection, the position of the skirting and columns, and the power connection points. From this data our technicians build a 3D layout of workstations and show how the custom table will fit — with walkways and drawer opening. We calculate custom office tables and a custom office desk from the actual dimensions of the niche, not from rounded values. We calculate a non-standard size for a niche separately: the countertop is cut to the actual dimensions, not to rounded ones. The mistake is usually not in the metres but in forgotten obstacles — the windowsill, radiator, skirting; they are dealt with at the measurement, not after installation, when rework already costs money and time.

How much space is needed for two or three monitors

For two monitors a countertop depth of 70 cm is comfortable, for three — 80 cm, otherwise the screens end up closer than the comfortable distance. Width is calculated not by the monitors but by the seating: two elbows on the countertop plus room for the keyboard and documents at the side — in practice that is from 140 cm for one person with two screens. A 22–25 mm countertop holds a monitor arm without sagging, and a cable channel keeps wires out of the elbow zone. Workplace ergonomics break down not because of screen diagonal but because of depth: the closer the monitor, the greater the strain on the eyes by the end of the shift. A steel frame compensates for uneven floors with adjustable supports — the table does not wobble, and the arm does not move with the countertop.

Table height for employees of different heights

We make a standard height of 75 cm and fit adjustable supports to compensate for differences in height and uneven floors in the staff area. Tables on a powder-coated steel frame are assembled in our own workshop and test-assembled before dispatch — the supports are set on site for the specific floor unevenness. For employees below 160 cm a footrest is added to the workstation; for taller ones the countertop is raised by 2–4 cm with the supports. If people of different heights work at one table, what helps is not a common “average” size but on-site adjustment and a footrest: seating is levelled without replacing furniture. At the measurement stage our technicians record the employees' heights and their usual seating height so that supports and footrests are set right away, not adjusted after installation. This way the workstation stays comfortable even for those who work standing for part of the shift.

Countertop and carcass materials for office tables by task

The countertop and carcass material is chosen for the role of the room and daily load, not “the more expensive the better”. We explain what really affects service life and how not to overpay for a finish no one will see.

What countertop thickness a work desk needs

Our tabletop is 22–25 mm, the carcass is 16–18 mm, and the edges are finished with 2 mm PVC edging — that is enough for daily office use. The edging protects the cut edges of the laminated chipboard from moisture and chipping: it is the exposed edge that first swells from spilled coffee and starts to crumble when furniture is moved. We use Egger and Kronospan E1-class board, and the 16–18 mm carcass holds shelves with documents and cabinets without sagging. A thin tabletop does not bend under the weight of monitors and elbows right away, but after a year: a barely noticeable bow appears, and the joint with the cabinet opens up. Thickness and edging matter more than the decorative pattern — when choosing, look at the cut and the edge, not at the decor catalog. If you need a custom office desk for a specific load, we select the thickness and edging to suit the room's task.

Egger or Kronospan laminated chipboard, or enameled MDF

For staff areas we use Egger and Kronospan E1-class laminated chipboard, and for the executive office — enameled MDF and natural veneer. Melamine-faced board withstands daily wiping, is not afraid of damp cloths, and costs noticeably less than enamel for the same desk geometry. Enamel on MDF gives an even matte surface with no visible board pattern, while natural veneer keeps the living grain of wood — both options suit an office where guests and partners come in. Enameled MDF is chosen not for strength but for looks and feel: in an open-plan hall this difference does not read, and glossy surfaces are more demanding to care for. In staff areas, repairability and resistance to daily cleaning matter more than the wood species on the tabletop.

Comparing materials by task and care

finish options by room role and care
MaterialWhere it fitsLoadCare
Egger laminated chipboard, 22–25 mmstaff areas, receptiondaily officedamp wiping
Kronospan laminated chipboard, 22–25 mmopen-plan halls, meeting roomsdaily officedamp wiping
Enameled MDFexecutive officemoderate, carefulsoft cloth
Natural veneerexecutive office, receptionmoderate, carefulno abrasives

Frame, supports and cable management of office desks

The frame is responsible for stability and the look of the workplace, and cable management for order on and under the tabletop. We break down which option to choose by load and how to plan wiring into the project in advance.

Steel frame or standard leg supports

We use a powder-coated steel frame with adjustable supports where rigidity and a long service life are needed, and standard leg supports in offices with classic furniture. Powder-coated steel withstands damp cleaning and does not chip at the edge, while adjustable supports compensate for uneven floors in older office buildings. In our workshop we make such desks to order: the frame is built for a specific tabletop rather than a ready-made one being adjusted. Custom office desks are assembled exactly this way — the frame is fitted to a specific tabletop, not the other way around. A steel frame wins not by visible strength but by not loosening during frequent rearrangements of workplaces — when a department moves to another floor, the structure is disassembled and reassembled without losing rigidity. For high-load areas where one desk is used in shifts, a steel frame is chosen more often than wooden supports.

How to hide wires under the desk

We equip tables with cable ducts and wire grommets so cables run along the countertop and frame instead of lying on the floor. The cable duct is mounted along the entire length of the countertop, and the grommet is placed above the work area — that way the cord from a monitor or charger doesn't stretch over the edge. The cable duct is planned before cutting: adding a grommet to a finished countertop is harder than including it in the 3D design we prepare in 1–2 days together with the measurement. At the design stage, technicians take into account the number of sockets, power supplies and the cable route between neighboring workstations — otherwise the grommet ends up not where the equipment stands. Well-thought-out cable management saves time when rearranging: cables are labeled and laid out according to a diagram instead of being untangled at every move.

Locks on cabinets and document wardrobes

We install locks on cabinets and wardrobes if documents or equipment are stored in the desk, and we use Blum, Hettich or Boyard hardware. A lock on a mobile cabinet locks several drawers at once with a single key, while document wardrobes get a separate mortise lock on the door. A lock is only useful together with a well-designed cabinet: a drawer on Blum runners opens smoothly and doesn't skew when locked, so the key doesn't jam after hundreds of openings. Blum hardware carries a 25-year manufacturer's warranty, and we give 24 months on the item as a whole under the contract — worth keeping in mind if the desk is meant for daily use. Locks are designed together with the cabinet in the 3D design: moving a finished lock to another door requires re-drilling and weakens the panel.

Which desk suits whom among executive and staff office desks

The same workshop makes both the executive office and the workstations in the open-plan area. The difference between them lies in the material, finish and details specified at the design stage.

Executive office desk

We furnish the executive office with MDF desks in enamel and natural veneer — with a finish that holds up in front of guests and during negotiations. Enamel gives a smooth matte or glossy surface without seams, while veneer preserves the living wood grain and suits representative interiors. In such models we install Blum, Hettich or Boyard hardware, locks on cabinets, cable ducts and wire grommets. We complete the set with a cabinet and shelf in the same decor so the room reads as a single ensemble. Such a custom office desk is built for a specific office rather than taken ready-made from a showroom. But what matters here is not the countertop area but the meeting zone: the space opposite the visitor is planned at the 3D design stage, otherwise the guest ends up at the edge with no room for documents. We do the office measurement and layout design free of charge in 1–2 days — the plan immediately shows whether there is enough space for a visitor.

Workstation in the staff area

In the staff area we build workstations from Egger and Kronospan laminated chipboard with 2 mm PVC edging — practical under daily use and frequent cleaning. We make the carcass 16–18 mm, the countertop 22–25 mm, and glue the edging around the entire perimeter, including the front edge that takes the load from hands and equipment. A custom desk for the open-plan area is often built in a row with shared supports or on a powder-coated steel frame with adjustable feet — this is how the line of workstations is leveled on an uneven floor. What wins here is not the most expensive material but the same decor on all desks: mismatched countertops visually "tear" the space apart, and the row stops reading as a single line. Before ordering, we check shades against samples from the same batch — melamine coating from different batches can show a noticeable difference in tone.

Tables for meeting rooms and reception

table options by room role
RoomTable formatEquipmentMaterial
Executive officesingle, with guest arealocks, cable ductMDF in enamel, veneer
Staff areaworkstations in a rowcable ducts, grommetsEgger, Kronospan board
Meeting roomshared table for a groupcable outletsboard, enamel
Receptioncompact counterspace for a visitorboard, enamel

How ordering office tables works for LLPs and sole traders

A legal entity needs clear stages and a full set of documents. We show the path from measurement to the acceptance certificate — with no surprises in the estimate or during installation.

Measurement and 3D layout design

We visit your office for a free measurement and prepare a 3D layout of the workstations within 1–2 days, so you can see the tables in the office before they are made. Measurement specialists record the room dimensions, the position of sockets, windows and doorways, and our technicians transfer this data into a plan with the actual sizes of countertops and pedestals. The project is not just for show: it is used to check walkways, access to sockets and the number of workstations, and changes at this stage cost less than rework after installation. If the office already has furniture, we mark on the plan what stays and what we replace — so the estimate does not grow because of forgotten items. The approved project becomes the basis for cutting and assembly, and production of office tables starts only after it is signed off.

Contract, prepayment and closing documents

We work with LLPs and sole traders under a contract and by bank transfer: 50 % prepayment, the remaining 50 % after signing the acceptance certificate, with the closing documents being the certificate and the delivery note. The contract fixes a specification with the decor, carcass and countertop thickness, Blum, Hettich or Boyard hardware and the cable duct layout, so there is something to check against on acceptance. The certificate is signed after installation, not at dispatch: this way the customer accepts tables that are already assembled and set up, not boxes in the workshop. The delivery note covers the handover of items, the certificate covers acceptance of the work; accounting processes both documents without additional requests. For a full-floor office order, one contract and one estimate are enough, and a later add-on in the same decor is issued as a separate specification to it.

Lead times and urgent orders

Lead times depend on the item and the material; for each option they are shown in the price list on this page, and we discuss urgent orders separately. Production takes place in our own workshop: cutting Egger and Kronospan laminated chipboard, edge banding with 2 mm PVC, painting MDF for executive offices, then a test assembly before dispatch. The lead time counts from the approved project, not from the call: changes to sizes after the laminated chipboard is cut shift the whole schedule, because the parts have to be cut again. If your move date is already set, tell us at the measurement — for an urgent order we rearrange the workshop queue for your set of items. See the final lead times for each option in the price list.

A full office set and add-ons in the same decor

An office is rarely furnished once and for all: headcount grows, zones change, some tables wear out. We show how to put together a custom table set in a single decor and add workstations later.

One decor and one estimate per office floor

We handle complete orders from a single workstation to a whole office floor in one decor — with one estimate and one contract for the entire set. Such an order includes desks for private offices, staff areas, meeting rooms and reception areas: carcasses and countertops made of E1-class Egger and Kronospan laminated chipboard, carcass 16–18 mm, countertop 22–25 mm, 2 mm PVC edge banding. For executive offices we add enameled MDF and natural veneer. We fit Blum, Hettich or Boyard hardware, and where needed — locks on cabinets, cable ducts and wire grommets. Over 13 years in Almaty we have completed 3 500+ projects, and large offices almost always come together from several desk types in a shared decor. A single decor across a floor matters not only for looks: identical materials are easier to reorder and replace later without a color mismatch. That is why the contract specifies not only the model but also the decor article number — it is used to source the same board later.

Reorder in the same decor later

We accept reorders in the same decor later, so a new workstation does not stand out from the desks already in place. Six months or two years on, you come back with the same task — to expand a staff area or add another desk to an office — and we reproduce the decor, thickness and edge banding from the records in the contract. The 2 mm PVC edge stays the same, so the joints and ends of the new countertops match the earlier ones. A reorder goes more smoothly when the decor and edge are written into the contract: they are used to source the material without a repeat measurement visit. Check that the documents list the board article number and the edge color — those two lines save a trip and weeks of waiting when a decor is discontinued.

Installation without stopping office work

We install desks with our own crew and coordinate the timing with the office schedule, and before dispatch we carry out a test assembly at the workshop. Our own 600 m² workshop in the south of the country covers the whole cycle: chipboard cutting, edge banding, MDF painting and assembly. The crew arrives in an agreed window — in the evening, on a day off or zone by zone — so employees are not left sitting on boxes. City delivery and up to 30 km are free on a large order, the threshold is stated on the delivery page, beyond 30 km — for an extra charge. We sign the acceptance certificate after installation, once everything is in place. Test assembly at the workshop saves time on site: the crew brings a checked set and assembles it rather than adjusting parts in the office. Lead times for each option are in the price list on this page.

The bottom line on office desks

We have gathered in one place what most often decides the outcome of an office furniture order: sizes, material, frame, documents and a consistent look across rooms when expanding.

  • Sizes: measure with the niche, sockets and walkways in mind, not just the wall length — that way the desk fits right the first time.
  • Material: choose it for the role of the room — laminated chipboard is more practical in an open-plan area, while enameled MDF and veneer suit an executive office.
  • Frame and cable management: allow for them in the design before cutting, otherwise grommets and ducts are harder to add.
  • Documents for a legal entity: the contract, 50 % prepayment and the acceptance certificate after installation set out each party's responsibility.
  • Consistent look: a set in one decor and the option to reorder later keep the office style when expanding.

12Calculation

How to calculate the cost of manufacturing to your dimensions

Select the desk type in the calculator, specify the width and depth of the workplace and the material — the calculation will be sent to the manager on WhatsApp, who will check the dimensions and prepare an estimate.

01Type
02Quantity, pcs of identical items
1 pc
130 pcs
03Carcass
04Fronts
05Hardware
06Options

13Office furniture

What else we make besides office desks

Office furniture

We design and make cabinet furniture for offices, precisely fitted to the space with a single décor throughout the floor.

Office wardrobes

We design and make office wardrobes for your documents, equipment and clothing, fitted into a niche with the right number of sections.

Document wardrobes

We'll make a wardrobe to fit your archive or office: free office measurement and a 3D layout design in 1–2 days, the price is fixed in the contract.

Clothing wardrobes

A wardrobe fitted into a reception or changing room niche keeps things tidy and protects employees' clothing from dust.

Office cabinets

We'll make cabinets to suit your desk and tasks: with a lock, for office equipment or filing.

Office sofas

We design and make sofas for receptions, waiting areas and meeting rooms: free measurement with fabric samples and a 3D design in 1–2 days, the price is fixed in the contract.

Executive office

We design and manufacture an executive office for a manager's needs: meetings, document storage, a lounge area.

Executive desk

We design and make a desk for a director's office with free measurement and a 3D layout design in 1–2 days.

Desk with a meeting extension

An executive desk with a briefing extension brings meetings and the workspace into one line without taking up extra space.

Meeting tables

We design and make meeting tables to fit the size of your room.

Reception furniture

We furnish a reception to fit your office: desk, sofas, tables and wardrobe in a single décor.

Staff furniture

We design workstations to fit the office layout: free measurement and a 3D layout design in 1–2 days, the price is fixed in the contract.

Loft office furniture

We furnish an office in a single décor: workstations, meeting rooms, reception and lounge areas.

Loft tables

A loft table on a steel frame with a wooden or laminated chipboard top solves the workspace task without losing the office style.