A custom kids' bed from MEBLIX is made to the exact size of your child's room: a free measuring visit, a 3D design in 1–2 days, production in our own 600 m² workshop in Almaty and installation by our own crews. We work with Egger and Kronospan boards and Blum, Hettich and Boyard hardware, and every bed comes with a 24-month warranty under the contract.
A niche, a sloping wall or a low ceiling does not rule out a good sleeping place. Here is how an ordinary measuring visit turns into a bed that fits the wall exactly rather than an average catalogue size.
What sizes are realistic
We design the bed to the room's real dimensions: the length allows for the child's growth, the width follows the mattress, and the depth follows the niche. All three can be non-standard at once — we copy an angled corner from a template, take the depth from the wall to the radiator, and order a mattress of unusual width together with the frame so the base never has to be adjusted later. Extra length matters more than extra width: a bed made "to grow into" in width loses stability and needs a new base within a couple of years. So we fix the width to a specific mattress and leave the length generous.
A bunk bed in a small room with a low ceiling
With a low ceiling we start the bunk bed calculation from the room height. We leave a safe gap between the top bed and the ceiling and fix the frame to the wall. The gap is not judged by eye: it is the height of the top mattress plus the child's height with a raised arm, otherwise making the top bed becomes awkward. In a room like this a loft bed with a desk underneath often works better than a second tier — it saves height and leaves room for study. We place the ladder at the end of the bed rather than by the window, so the windowsill and radiator stay accessible.
What we measure before work starts
- Wall dimensions: the room's length and width at three points, to catch any skew and avoid gaps behind the bed.
- Ceiling height: from the floor to the lowest point, including any beam or air duct above the bed.
- Niche and slope: depth, width and angle — the frame is designed to fit that exact opening.
- Sockets and windows: switches, radiators and the windowsill, so the bed does not block access to them.
- Uneven walls: deviations at several points, otherwise the frame stands with a gap or will not go into the niche.
Carcass materials and hardware
The carcass material and the hardware decide how safe the bed is and how long it lasts. Here are the options we use in the workshop and what each is good for.
Laminated chipboard or foil-wrapped MDF
For custom beds we use Egger and Kronospan boards: laminated chipboard for a practical carcass, and foil-wrapped MDF where a smooth surface and a durable finish are needed. Chipboard holds the shape of the rails and drawer bottoms, cuts easily to a non-standard length, and its decors match the wardrobe and dresser fronts in the same room. We use foil-wrapped MDF for headboards and visible side panels, because the PVC foil wraps the edge in one piece without a seam. With chipboard the edging matters more than the board itself — it keeps out moisture and protects against chips — so we edge every visible and hidden edge and check the fit during trial assembly.
Carcass materials compared
| Material | Finish | Best for | Care |
|---|
| Egger and Kronospan chipboard | laminate | basic carcass | wipe with a damp cloth |
|---|
| Foil-wrapped MDF | PVC foil | smooth surface, seamless edge | soft cloth |
|---|
| Enamel | paint on MDF | smooth, can be repaired | no abrasives |
|---|
| Solid wood | lacquer or oil | natural wood | refresh from time to time |
|---|
What really makes a bed stable
We fit Blum, Hettich and Boyard hardware and calculate the fixings for the load; Blum hardware carries a 25-year manufacturer's warranty. Soft-close runners on bedding drawers carry the weight of blankets and toys, and the connectors between rails hold the corners without play. Stability comes not from board thickness but from the wall-fixing layout and how the load is spread across the base. Before installation we check what the wall is made of: in a panel building the anchor points differ from those in a brick one.
Fixings and trial assembly before dispatch
- Anchoring plan: we choose fixings for each wall type, so a bunk bed does not shift under load.
- Rail connectors: parts are joined at several points, not only at the corners.
- Feet: adjustable feet compensate for uneven floors in older flats.
- Trial assembly: we assemble the whole bed in the workshop, check the gaps, and only then take it apart for delivery.
Kids' bed designs we make
The design determines how the bed fits the room and how long it serves. These are the options we build in our own workshop and the situations each one suits.
Bunk beds, house beds and loft beds
We make bunk beds, house beds and loft beds to suit the room size and ceiling height. In a bunk bed the top tier rests on a reinforced frame made of Egger boards, and the ladder is fixed to the side panel rather than the headboard, so the load goes into the posts, not the decorative parts. A house bed gets a roof and side rails; a loft bed gets an open platform with a guard rail so the child cannot roll off in their sleep. In a small room a house or loft bed often beats a bunk bed, because it gives a play or study area below instead of a second bed.
Beds with drawers and upholstered headboards
We add storage drawers under the bed and a headboard in hard-wearing fabric. The drawers run on Blum or Hettich roller runners, which carry the weight of bedding and toys and do not sag with daily use. We choose dense, short-pile upholstery that is easy to clean of marker and food stains. In a kids' room it is worth making the soft headboard removable with a zip, so it can be taken off and cleaned without dismantling the bed.
Teen beds and beds to grow into
Beds for teenagers are designed with extra length and a reinforced base, so the bed carries a teenager's weight and grows with them. The base uses slats at a closer pitch, which prevents sagging in the years when body weight increases noticeably. A removable side rail comes off without dismantling the frame once the child no longer needs it. When ordering, ask about the slat pitch and the height adjustment range, so the growing room really works.
Production and installation step by step
Ordering directly from the manufacturer follows clear stages, from the measurer's visit to signing the acceptance certificate.
Measuring and 3D design
Measuring and the 3D design are free and take 1–2 days: our measurers come to your home, and MEBLIX technologists prepare the drawing and visualisation. The measurer records the room size, ceiling height, sockets and projections, and checks the walls with a laser level — a skew of even a couple of centimetres changes the carcass depth and how the drawers sit. From this data we build a 3D design with exact section sizes, board thickness and fixing layout. Approve the design before cutting starts: a change on screen costs less than remaking finished parts.
Lead times by material
| Carcass material | Production stages | Lead time |
|---|
| Chipboard | cutting, edging, assembly | see the price table on this page |
|---|
| Foil-wrapped MDF | cutting, foil pressing, assembly | see the price table on this page |
|---|
| Enamel | cutting, sanding, painting, drying | see the price table on this page |
|---|
| Solid wood | machining, finishing, drying | see the price table on this page |
|---|
Installation, acceptance and warranty
Our own crews install the bed, the acceptance certificate is signed after installation, the bed has a 24-month warranty under the contract, and Blum hardware has a 25-year manufacturer's warranty. The crew brings modules already assembled and checked in the workshop, levels the carcass, fixes it to the wall and adjusts the soft-close drawers and hinges on site. Payment is in two steps: a 50 % prepayment at the start and the remaining 50 % after the certificate is signed. Before signing, check that the drawers run smoothly and the joints are even.
Custom-made versus off-the-shelf
A ready-made bed from a shop fits the room as best it can: gaps remain by the wall and sockets get blocked. A bed from the manufacturer is made to size.
A direct manufacturer versus ready-made furniture
A direct manufacturer means measuring, design, workshop and installation in one company, with no middleman. A showroom bed comes in a limited range of standard sizes, so in a room with a niche or a slope you get gaps and dead corners. We record the geometry of the walls, projections and skirting boards at the measuring visit, turn it into a 3D model in 1–2 days, and cut the carcass to those measurements in our own 600 m² workshop with cutting, edging, painting and trial assembly. Agree the layout with the skirting boards and windowsill in mind, otherwise the bed will fit but the drawers by the wall will not open.
Will a custom bed hold a teenager
Yes — thanks to a reinforced base and wall fixing; we calculate the load when preparing the drawing. Strength comes from the base design and the number of fixing points, not from board thickness: slats, a centre support and anchors in a load-bearing wall spread the weight across the frame. Before installation, confirm which wall the bed will be fixed to: a plasterboard partition needs an embedded mount, otherwise the fixings can pull out the first time someone jumps on the bed.
The bottom line on kids' beds
The result depends on four things: measuring, materials, design and the acceptance procedure. These points are a good place to start a conversation about your child's room.
- Design from measurements: niches, sloping walls and low ceilings are solved in the 3D design, not during installation.
- Materials and hardware: chipboard, foil-wrapped MDF, enamel and solid wood differ in care and resistance to wet cleaning.
- A design for the room: bunk, house, loft or a bed with drawers is chosen by floor area and ceiling height, not from a catalogue.
- Lead time and acceptance: the timing depends on the material, and installation plus the signed certificate close the order.
- Direct manufacturer: a bed sized to the room and a contractual warranty are possible when measuring, workshop and installation are one chain.