
Temirzhan Nurpeisov
Furniture assembly carpenter11 years
★ 4.81 · 47 ratings
For business · HoReCa
We make tables, chairs, sofas, the bar counter and service counter for the floor as one series in our own workshop — from materials that withstand guest traffic and daily cleaning. Measurement and a 3D layout are free, the price is fixed in the contract, warranty 24 months.
Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months
01Types
02Venue case studies
Property type, scope, materials and lead time — per project.
03How we work with venues
04Prices
The "from" price is per item in the basic configuration; for the cashier counter and the reception desk it is per linear meter. We fix the final cost of the dining area in the contract after a free measurement and 3D design; a wholesale price applies to a series.
05For businesses
We work with LLPs and sole proprietors on bank transfer. Price, materials and lead times are in the contract before production starts: the furniture fits the venue's opening schedule.
Request a contract and invoice06Principles






01 / 06
07Production
Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.
08Team
MEBLIX workshop craftsmen who make and assemble furniture to order.
01 / 0709FAQ
Didn’t find the answer? Message us — a manager replies, not a bot.
Ask on WhatsAppA set for a hall of 10 seats and a single café chair are both in the price list above. We calculate the exact amount after a free measurement and 3D design and fix it in the contract, and a wholesale price applies to a series.
Yes, if the opening date is given at the measurement: we schedule installation by our own team to fit the venue's opening schedule. Lead times for each item are in the price list on this page; with a tight schedule, a rush order is possible.
Yes, we take on both individual items and the whole hall. If you need the remaining pieces later, we'll make them in the same series and the same decor.
No, a free measurement is enough. Based on its results, within 1–2 days we prepare a 3D layout of the hall: it shows the number of seats, walkways and the place of each item.
Samples of decors, fabrics and countertops are collected in our showroom in Almaty. You can hold them against the hall's wall and floor at the measurement to check the shade under your lighting.
Yes, the price list includes a refrigerated display case for desserts made of stainless steel and glass. We'll agree its size and place in the counter at the measurement along with the rest of the hall's furniture.
We have been working for 13 years and have completed 3 500+ projects, including 60+ turnkey cafes, as well as restaurants, bars and coffee shops. We make everything in our own 600 m² workshop and install it with our own team.
Yes, we make the bar counter, checkout counter and display case in the same series as the tables and chairs, with the fronts matched to the hall's decor. The prices for the bar and checkout counters are in the price list above on this page.
Write to us and give your contract number: the hall's items are covered by a 24-month warranty under the contract, and a loose joint within this period is fixed under warranty. For the counter's drawers with Blum hardware, the manufacturer's 25-year warranty also applies.
Yes, we work by contract and invoice, payment is by bank transfer. 50 % prepayment, the remaining 50 % — after signing the acceptance certificate; closing documents are the certificate and the invoice.
10Reviews
4,9
average rating
on Google and Zoon
Everyone can see a review on the platform: this is how other people check whom to trust with an order. If something went wrong, write to us and we will reply within 1–2 business days.
Message us on WhatsApp11Article
We make cafe furniture in our own workshop in Almaty: tables, chairs, soft seating, a bar counter and counters in one series and one finish. Before production we measure the hall free of charge and prepare a 3D layout project in 1–2 days, and we coordinate installation by our own team with your opening date.
A venue's hall is made up of several groups of items, and each has its own load: a table takes hot dishes, a chair takes constant rearranging, a counter takes the queue. Below is the makeup of the hall and the choice between custom and ready-made pieces.
Ready-made tables and chairs from classified ads help at the start, but they rarely match the dimensions of the hall or each other in decor. A standard-width table leaves an empty corner by a column or niche, and a set from three different batches looks mismatched already in the first season. Second-hand furniture for a cafe has already used up part of its life: loose chair joints and worn tabletop edges quickly show under a flow of guests. Items made to the dimensions of the hall fill the wall spaces, account for windows, radiators and the waiter's route, and a series in one color supports the brand style. There is also the matter of repair — with a ready-made item without a manufacturer, replacing the seat or support in the same shade is almost impossible. When comparing, count not the cost of one chair, but how many seats each option gives in your hall specifically.
| Item | Hall zone | Item base | What to check |
|---|---|---|---|
| Table on a metal base | center of the hall, by the window | laminated chipboard or HPL, steel | stability on the floor |
| Solid oak table | family zone | solid oak | care of the finish |
| Chair with a soft seat | all seating | metal or solid wood, faux leather | washable upholstery |
| Sofa and banquette | along the walls | plywood, timber, foam | aisle width |
| Bar counter | bar zone | MDF, solid wood, quartz | height for bar stools |
| Display counter | pickup zone | laminated chipboard, glass, lighting | space for equipment |
A table in a dining area lives under hot cups, spilled juice and wet cleaning several times per shift. Its lifespan is decided by three details — the top layer of the countertop, the edges and the base.
We make countertops for dining areas from HPL plastic, solid surface or E1-class Egger and Kronospan laminated chipboard 25 mm thick. HPL plastic and solid surface can handle hot cups, spills and daily wet cleaning, so they are chosen for high-turnover zones and hot kitchens. The melamine coating of laminated chipboard resists abrasion and detergents, but doesn't like red-hot dishes or water left on the joints. When we take on custom tables for a cafe, we first ask about the menu: a coffee shop with desserts and a grill bar put different loads on the surface. Tone matters too — on a dark solid-colored surface, streaks show after wiping, while on a light one with a wood or stone texture they are almost invisible. If dishes are served in cast-iron skillets, choose HPL or stone and include trivets in your table setting.
The lifespan of a table in a dining area is determined by the edges and the base, so we cover all edges with 2 mm PVC edging and make the bases from powder-coated steel. The edging keeps moisture from cleaning out of the board: an exposed chipboard edge swells, and the countertop delaminates along the edge. The powder coating on the steel frame withstands chair impacts, guests' shoes and detergents, and the metal itself doesn't loosen from constant rearranging. The base can be central, four-legged or wall-mounted: a central base leaves more room for knees, four legs are more stable under a heavy stone countertop. The wall-mounted option frees up floor space for cleaning and suits narrow dining areas along a window. On uneven tile floors, ask for adjustable glides — a guest notices a wobbly table before they notice the taste of the coffee.
| Material | Heat and moisture | Care | Where it fits |
|---|---|---|---|
| HPL plastic | handles heat and spills | wet cleaning without restrictions | high-traffic dining area |
| Solid surface | withstands heat and moisture | mild non-abrasive products | bar counter, serving counter |
| 25 mm laminated chipboard with PVC edging | heat only via a trivet | wet wiping | coffee shop, dessert area |
| Solid oak | sensitive to standing water | oil or lacquer, periodic refinishing | family dining area, warm interior |
Guests judge a venue by how comfortable it is to sit, too. We break down the chair frame, upholstery of soft seating and seating for a summer terrace that gets put away for the winter.
We make hall chairs on frames of solid wood, bent plywood or powder-coated steel, with a rigid or upholstered seat. Solid wood and plywood give a warm look for a coffee shop and a family hall, while a metal frame is thinner and handles constant rearranging in a fast-service hall more easily. A rigid seat suits a high-turnover hall where a guest spends little time, while an upholstered one with eco-leather suits places for long meetings and breakfasts. In the upholstered furniture section of our workshop, seats are covered in the same fabric or eco-leather as the sofas, so the seating looks like one set. Chairs in a hall are moved constantly, and the main load is taken by the leg joints, not the seat itself. Before ordering a series, sit on the sample longer than a guest's usual visit and move it around on your own floor.
For upholstered seating we use contract anti-vandal fabrics and eco-leather that withstand daily wet cleaning. Under the upholstery is a frame of plywood and timber and high-density PU foam: such filling does not sag into a hollow at the popular spot by the window and holds the seat shape under changing guests. Eco-leather wipes clean with a damp cloth and suits areas with sauces, while anti-vandal fabric is warmer to the touch, does not slip and better hides marks from bags and belts. When custom cafe furniture is upholstered in our upholstered furniture section, the fabric is chosen from showroom samples in the venue's brand color. Individual models of sofas and banquettes are covered on the neighboring page of the section. For areas with children, choose a dark tone with texture: stains and scuffs are less noticeable on it than on a smooth light fabric.
The number of seats and waiter convenience are decided on the plan, not after installation. We explain what the hall project shows, how to make seating flexible and which zones a venue has.
After a free measurement of the site, we prepare a 3D hall layout project in 1–2 days, showing all tables, chairs, sofas, the bar counter and the service counter in real dimensions. The measurement specialist records windows, columns, radiators, kitchen and restroom doors, and sockets for bar equipment — everything that limits seating. The project immediately shows how many seats fit in the hall, where the waiter's route from the kitchen runs and whether the queue at the till blocks the entrance. Layout options are compared before cutting: wall-mounted sofas versus individual chairs, round tables versus square ones. Revising the plan costs nothing, while moving a finished bar counter means a new item. Show the project to the waiters and baristas — they will be the first to notice a bottleneck on the route with a tray.
Flexibility in the dining area comes from two-seat tables that can be pushed together for a group, and convertible tables that unfold from a square into a rectangle. A compact square table for two takes up little space on a weekday, while at weekends several such tables form a shared table for a birthday or business meeting. A convertible table solves the same problem without rearranging neighbours: the tabletop unfolds in place and seating doubles. Round tables soften the geometry of the room and are convenient by the window, but you cannot make a long table out of them. For sliding seating it is important that the height, tabletop thickness and type of supports match — then the joint looks even and does not get in the way of plates. Keep most tables the same size and shape so that any two of them can be turned into one without alterations.
A venue's dining area is a series, not a collection of individual items. We explain how to keep one palette across all pieces, why a sample is needed and how to add seats later.
We manage the entire room with one estimate and one contract, in one series and one decor — from tables and chairs to the bar counter and serving counter. Furniture production for cafes in our own 600 m² workshop in Almaty combines laminated chipboard cutting, edge banding, MDF painting and upholstery, so the facade colour of the counter and the fabric of the sofas are chosen together, not from different suppliers. The customer selects laminated chipboard, fabric and countertop decors from samples in the showroom, and we record the article numbers in the specification to the contract. A wholesale price applies to the series for the whole room, and the calculation remains a single document for accounting. Approve the decor from a sample in daylight and next to the fabric: on a phone screen the shade of wood and eco-leather looks noticeably different from real life.
For a series we first make a pilot sample — a chair, table or sofa section — and agree it with the customer before launching the whole batch. The sample shows what is not visible in the 3D design: the actual seat height, the density of the foam, the texture of the upholstery, the weight of the chair and how it slides across the venue floor. Changes to the sample are made once, and then the whole series repeats the approved item. Before dispatch to the site, the items undergo a test assembly in the workshop, so the installation team does not adjust parts in the room on the eve of opening. Through the sample it is also convenient to check the combination with the interior by placing it by the window and under evening light. Check height, upholstery and stability on the pilot sample, not just colour — these are the little things a guest notices from the first minute.
For a legal entity ordering a hall, documents, a clear schedule and the maker's responsibility for the result all matter. We break down payment, installation before opening and the stages of work.
Delivery and installation are handled by our own crew, and we agree the installation date around the venue's opening schedule. Production times depend on the item and material; times for each option are in the price list on this page, and rush orders are possible too. The installers assemble tables, set up the bar counter and counter, arrange the display case and check that every support is stable on your floor. Delivery within Almaty and up to 30 km is free on a large order, beyond that for an extra fee. It is best to finish hall renovation, floor laying and wall painting before the crew arrives: sanding dust settles on upholstery and tabletops. Give us the opening date at the measurement — then we will schedule cutting and installation from it, not from the workshop's free slot.
| Stage | What we do | What the customer gets |
|---|---|---|
| Measurement | we measure the hall free of charge | measurements and a list of zones |
| 3D design | we lay out the seating in 1–2 days | a hall plan with all items |
| Contract | we fix the series, decor and estimate | contract, invoice, specification |
| Pilot sample | we make and approve an item | an approved sample of the series |
| Production | cutting, edge banding, upholstery, test assembly | a finished series of items |
| Installation and act | we install the furniture with our own crew | act, waybill, 24-month warranty |
A short guide for those preparing a dining room for opening and selecting items to match their concept, menu, and expected guest flow.
12Calculation
Select items and the number of seats in the calculator, the material for countertops and upholstery — the calculation will go to the manager on WhatsApp, who will clarify the hall dimensions and suggest a time for measurement.
13For business