Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
Restaurant hall with a wall-mounted sofa, wooden tables, and soft beige chairs by the windows

For business · HoReCa

Custom restaurant furniture in Almaty

We furnish the restaurant hall with a single series: seating, lounge area, hostess stand and bar in the same décor from our own workshop. Measurement and 3D layout project are free, the price is fixed in the contract, warranty 24 months.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 7 days
lead time
24 mo.
warranty under contract

Restaurant hall: wall-mounted sofa, tables and upholstered chairs in one series

02Venue case studies

Completed furniture projects for restaurants

Venue type, scope, materials and lead time — per project.

  • Corner sofas along the walls — Samal microdistrict, Medeu districtVenue

    Corner sofas along the walls

    Samal microdistrict, Medeu district

    A sofa line following the actual wall — module to module, from column to column. Corner modules fit into niches with no gap, seating for a relaxed dinner of an hour and a half to two hours.

    Scope
    sofa line + corner modules
    Materials
    plywood frame, faux leather
    Lead time
    28 days
    I want the same
  • Tables and chairs for a coffee shop — Koktem microdistrict, Bostandyk districtVenue

    Tables and chairs for a coffee shop

    Koktem microdistrict, Bostandyk district

    A seating group for a coffee shop: tables on a metal base and chairs in contract fabric in a matching style. The batch was cut and sewn from a single pattern — identical geometry and tone.

    Scope
    18 tables + 40 chairs
    Materials
    laminated chipboard + metal base
    Lead time
    20 days
    I want the same
  • Restaurant bar area — Nurly Tau Business Center, Bostandyk districtVenue

    Restaurant bar area

    Nurly Tau Business Center, Bostandyk district

    A bar area with the bartender's work front and lower storage sections, plus a hostess stand at the entrance with a frieze for the logo and a niche for the reservation book.

    Scope
    bar counter + hostess stand
    Materials
    MDF + HPL worktop
    Lead time
    30 days
    I want the same
  • Sofa lines for the soft zone — Zhetysu microdistrict, Auezov districtVenue

    Sofa lines for the soft zone

    Zhetysu microdistrict, Auezov district

    Modular sofas along the hall walls: assembled to the length of the wall, soft seating and wear-resistant upholstery for guest traffic.

    Scope
    modular sofas + tables
    Materials
    faux leather, laminated chipboard
    Lead time
    24 days
    I want the same
  • Semicircular booth sofas — Nova City residential complex, Auezov districtVenue

    Semicircular booth sofas

    Nova City residential complex, Auezov district

    Private semicircular booths with a table: an intimate zone for groups and a striking accent in the restaurant interior.

    Scope
    bar stools + half-armchairs
    Materials
    solid beech, contract fabric
    Lead time
    18 days
    I want the same

03How we work with venues

How ordering furniture for a restaurant works

Book a measurement at the venue
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 7 days

    Production

    Panel cutting, MDF painting, plywood and timber frame assembly, seat upholstery — all on one 600 m² site. Lead times for each option are in the price list on this page, rush orders are possible.

  5. 05

    1 day

    Delivery and installation

    We deliver, carry in, assemble, place and adjust the furniture. After installation we clean up after ourselves.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

04Prices

Prices for chairs, tables and restaurant sofas

The "from" price is per item, for a modular sofa — per linear metre of segment, in base fabric and decor. The final amount for the whole hall is fixed in the contract after a free measurement and 3D design.

  • 50% prepayment, the rest after installation and sign-off
  • Kaspi, card, cash, bank transfer for companies
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • Restaurant chairsolid wood/​metal frame + contract fabric12–18 daysfrom 18 000 ₸
  • Banquetteframe + foam + contract fabric12–16 daysfrom 28 000 ₸
  • Restaurant tablesolid oak / laminated chipboard + metal base12–18 daysfrom 35 000 ₸
  • Bar chair with height adjustmentchrome-plated metal, faux leather7–10 daysfrom 55 000 ₸
  • Restaurant armchair with armrestspremium fabric, beech solid wood7–10 daysfrom 89 000 ₸
  • Restaurant bench with upholstered seatjacquard, pine solid wood7–10 daysfrom 98 000 ₸
  • Hall set (table + 4 chairs)solid wood / laminated chipboard + contract fabric16–24 daysfrom 110 000 ₸
  • Reception armchair with high backfaux leather, metal frame7–10 daysfrom 115 000 ₸
  • Soft corner sofaplywood frame + faux leather/​matting20–30 daysfrom 140 000 ₸
  • Hostess standlaminated chipboard + MDF front + logo fascia20–30 daysfrom 150 000 ₸
  • Modular sofa for a soft seating area (straight segment)velvet, metal frame10–14 daysfrom 180 000 ₸/⁠lin. m
  • Bar arealaminated chipboard + MDF + solid wood/​HPL worktop22–35 daysfrom 190 000 ₸
  • Round extendable dining tablesolid oak, veneered worktop7–10 daysfrom 210 000 ₸
  • Straight two-seat restaurant sofafaux leather, metal frame7–10 daysfrom 320 000 ₸
  • Corner sectional restaurant sofa (3+2 seats)velvet, solid pine, metal frame7–10 daysfrom 450 000 ₸

05For businesses

We supply restaurant furniture to businesses with contract and invoice

We work with LLPs and sole proprietors on bank transfer. Price, materials and lead times are in the contract before production starts: the furniture fits the venue's opening schedule.

Request a contract and invoice
  1. 01Contractprice, materials, lead times and installation date — before we start
  2. 02Estimate and 3D projectfree, within 1–2 days after measurement
  3. 03Invoice for paymentbank transfer for LLPs and sole traders
  4. 04Closing documentsacceptance certificate and delivery note after installation
50%
deposit, balance — after the acceptance certificate
Bank transfer
for LLPs and sole proprietors; for private clients — card and cash
24 mo.
warranty on items per contract
Series
a whole hall, hotel floor or dorm rooms — one estimate and one contract
Pilot sample
for a series we first make one sample — approve it and launch the run

06Principles

What we build into the layout of the dining hall

  1. 01

    Seating based on the hall layout

    First we lay out the waiters' aisles and the path from the kitchen, then place tables and sofas. That way the hall seats as many guests as it can actually serve.

  2. 02

    PVC edge on all ends

    We finish the ends of worktops, hostess stands and the bar area with 2 mm PVC edge so the corners don't swell from the mop and wet cloths after closing.

  3. 03

    Upholstery that washes

    Contract anti-vandal fabrics and faux leather handle daily wet cleaning and spilled drinks without losing colour or texture.

  4. 04

    One series for the whole venue

    Chairs, sofas, hostess and bar are made in one decor and from one batch of fabric. Later you can reorder items in the same series.

  5. 05

    Pilot sample before the batch

    Before launching a series we make and approve one chair or sofa module. The batch matches the approved sample in seating, seams and colour.

  6. 06

    Hardware for frequent opening

    We fit the drawers and doors of the hostess station and bar with Blum, Hettich or Boyard hinges and runners: they are opened many times per shift, and the movement should stay smooth.

Stack of Egger and Kronospan laminated chipboard sheets in our workshop warehouse before cutting for commercial furnitureCNC machine cuts a laminated chipboard sheet into furniture parts for the venue according to drawingsEdge banding machine seals the ends of parts with 2 mm PVC edge in the MEBLIX workshop in AlmatyA craftsman applies enamel to MDF fronts in the painting booth of our workshopA craftsman checks the control assembly of the item in the workshop before sending it to the customer's siteFinished straight sofa for the soft seating area after installation in the venue hall

01 / 06

07Production

Where we make restaurant sofas from frame to upholstery

Six steps in our 600 m² workshop. You can see each of them with your own eyes: the showroom and production are under one roof.

  1. Stack of Egger and Kronospan laminated chipboard sheets in our workshop warehouse before cutting for commercial furniture
    01

    Egger · Kronospan · E1

    Board

    Egger and Kronospan boards of emission class E1 arrive at the workshop warehouse. There are 40+ laminated chipboard decors, 16–18 mm thick. Class E1 is for dining halls, guest rooms and rooms.

  2. CNC machine cuts a laminated chipboard sheet into furniture parts for the venue according to drawings
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the drawings, and the machine cuts the board to them. Dimensions come from a laser measurement accurate to 1 mm.

  3. Edge banding machine seals the ends of parts with 2 mm PVC edge in the MEBLIX workshop in Almaty
    03

    Blum · Hettich · Boyard

    Edging and drilling

    The edge-banding machine seals the edges, then we drill holes for Blum hinges and Hettich runners.

  4. A craftsman applies enamel to MDF fronts in the painting booth of our workshop
    04

    Any RAL colour

    Enamel and veneer

    A finishing specialist paints the fronts to RAL — matt and gloss. The carcass and upholstery of the sofas are made in the same soft furniture area, so the joints of the modules and the fabric pattern match along the whole line.

  5. A craftsman checks the control assembly of the item in the workshop before sending it to the customer's site
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the modules in the workshop before dispatch, checking front gaps and drawer travel. The quality control department signs the item off for shipping.

  6. Finished straight sofa for the soft seating area after installation in the venue hall
    06

    Installation to fit the opening schedule

    Finished item

    We deliver, bring in and assemble in 1 day, adjust the furniture and clean up after ourselves. From signing the acceptance certificate — a 24-month warranty.

08Team

Who will create the seating for your restaurant

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

09FAQ

Frequently asked questions about ordering furniture for a restaurant

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01Can you make furniture based on our designer's project?

Yes, we work from the interior designer's drawings and visualizations. During the measurement we check the dimensions against the hall, suggest fabrics and decors for the project and agree on a pilot sample before the series is launched.

02How much does a custom restaurant chair cost?

A restaurant chair on a solid wood or metal frame with contract fabric is in the price list above. The final cost depends on the fabric, the shape of the backrest and the quantity, and the wholesale price is calculated for the whole series.

03How much does a set of a table and four chairs cost?

A hall set of a table and four chairs is in the price list above. The price depends on the tabletop material, the fabric and the number of sets, and we fix the exact amount in the contract after measuring.

04What does a 3D hall layout project show?

The 3D design shows where the tables, sofas, hostess station and bar will stand, how many seats fit and where the waiters' aisles run. The measurement and design are free; we make changes until the contract is signed.

05Will you make the furniture in time for the restaurant opening?

Yes, a rush order is possible. The lead times for each option are in the price list on this page, and we agree the installation date to fit the venue's opening schedule when the contract is signed.

06Do you make round tables for banquets?

Yes, we make a round extendable table from solid oak with a veneered top, and it is in the price list above. Folded, it stands in the main hall, and extended it seats a party without a separate banquet room.

07Where can I see fabrics and decors for hall furniture?

In the showroom in Almaty there are samples of fabrics, eco-leather, decors and countertops. You can compare them by touch and under light similar to your hall's lighting, and choose an option before the contract.

08Can I order only sofas without chairs and tables?

Yes, any item from the price list can be ordered separately. The corner sofa and the modular lounge sofa, which is priced per linear metre, are both in the price list above. We will match the fabric to the furniture you already have.

09Can the restaurant logo be placed on the hostess counter?

Yes, we make the hostess station with a frieze for the venue's logo. The carcass is chipboard and the front is MDF, with shelves and drawers inside for menus and a tablet. See the price of the station in the price list above.

10How much does a bar area for a restaurant cost?

A bar area in chipboard and MDF with a solid wood or HPL countertop is in the price list above. You can order height-adjustable bar stools for it in the same eco-leather as the hall sofas, and their price is shown there too.

10Reviews

Reviews about furniture for restaurants

4,9

average rating
on Google and Zoon

See all reviews

11Article

Custom restaurant furniture in Almaty from MEBLIX manufacturer

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

We make restaurant furniture based on a hall measurement: free measurement and a 3D seating layout before the contract, manufacturing in our own 600 m² workshop in Almaty, installation by our own crew to fit your opening schedule. The entire hall, lounge area, hostess stand and bar come as one series in a single decor, with a 24-month warranty under the contract.

What restaurant furniture the hall needs

The furniture set for a hall is derived from the floor plan, dining format and guest flow, not from a catalog. First seats and aisles are counted, then items are selected for each zone of the space.

Where seating calculation for the hall begins

We start restaurant furniture with a free measurement of the space and a 3D seating layout that the client sees before the contract. During the measurement we record columns, windows, radiators, kitchen doors and the future bar area — everything that limits the layout. The project shows where the waiter station and high chair will stand, how many two- and four-seat tables fit, where the sofa line will run and whether there is room for a group at a round table. The client sees the hall through the eyes of a guest and a waiter before the workshop starts cutting, and can rearrange zones without extra cost. Waiter aisles and the path from the kitchen to the far tables are laid out first, and only then seats are added — otherwise the hall on paper holds more guests than it can serve on a Friday night.

Which items go in different zones of the hall

Space zones and suitable items
Hall zoneItemsWhat matters
Center of the halltables on metal bases, chairsease of rearranging
Along walls and windowssofas, banquettes, benchesseating without extra aisles
Niches and cornerssliding sofa, corner modulesprivacy for groups
Banquet arearound extendable tables, armchairsflexibility for guest count
Entrancehostess standgreeting and seating
Barbar area, bar stoolsmatching decor with the hall

How a restaurant hall differs from a cafe in furniture

In a restaurant guests sit longer than in a fast-service cafe, so seating here is softer, roomier and with back support. Instead of light chairs, armchairs with armrests are more often used; instead of narrow tables, wider ones that fit table settings, glasses and shared dishes. Sliding sofas and corner modules create private spots that are usually booked first. A round extendable table handles an evening for a large group without a separate banquet room. Wood, veneer and dense upholstery support a calmer interior, while light above each table highlights the countertop texture. The longer the average dinner, the more important the backrest, armrests and distance between neighboring tables — these three parameters should go into the project before choosing the fabric color.

Soft sofas and banquettes along walls and in niches

The lounge area occupies the calmest spots by walls, windows and in niches. It is designed around the actual space, so ready-made store sofas rarely fit there without gaps.

How the sofa line is fitted to the wall without gaps

We design custom upholstered furniture for restaurants based on the actual wall — module by module, from column to column, taking into account windowsills and radiators. The measurement specialist records the real length of each section rather than taking a size from the technical passport plan: in older buildings, walls are rarely straight. The sofa line is assembled from straight segments, corner modules and end armrests, so it can run through niches and around protrusions. We make each segment removable so it can be taken out for floor cleaning or upholstery replacement. In the upholstered furniture section of our workshop, each module gets its own frame and upholstery, and the joints match in fabric pattern. The corner module and end armrest solve the problem of a crooked corner that a ready-made sofa cannot handle — with no gap for napkins and crumbs to fall into.

Sofa, banquette or armchair for the soft seating area

Upholstered seating options and their purpose
ItemWhere it is placedStrength
Corner sliding sofaniche, corner of the hallprivacy for a group
Straight sofaalong the wall by the windowseats two or three guests
Modular segmentlong walla line of any length
Banquettealong the wall opposite the chairssaves space
Bench with upholstered seatnarrow passage, verandacompactness
Armchair with armrestscenter of the hall, loungelong-lasting comfort

Which seating is comfortable for a guest at a long dinner

Comfortable seating means coordinated seat and table height, seat depth and backrest angle, not just soft upholstery. If the sofa against the wall is lower than the chairs opposite, guests at the same table sit at different levels and reach for their plates. A seat that is too deep makes you lean back and put a cushion behind your back; one that is too shallow makes you sit on the edge. A slightly reclined backrest and firm filling support the lower back all evening, and an armrest at the end of the sofa helps you get up. For the lounge area, seating is made lower and deeper; for the dining part, flatter and with a more upright backrest so the guest can comfortably cut hot food. The seats of sofas, banquettes and chairs in the same hall are aligned to a single height at the design stage and checked on a sample before the batch is launched.

Fabrics, frame and countertops for the load of a busy hall

Restaurant items work every day for many hours: hundreds of seatings, spilled wine, wet cleaning after closing. That is why materials are chosen for wear and care, not just color.

Which upholstery withstands daily cleaning

  • Contract fabrics: we upholster the hall's chairs and sofas in heavy-duty contract fabrics designed for commercial use and frequent cleaning.
  • Faux leather: wipes clean with a damp cloth in seconds, so it suits seating by the bar and at tables where drinks are most often spilled.
  • Velvet: gives a soft, velvety texture for sliding sofas and the lounge area, where coziness matters more than cleaning speed.
  • Jacquard and basketweave: a dense weave with a pattern hides small marks and suits benches, banquettes and armchairs.
  • Choosing by samples: we look at fabrics in the showroom on samples, comparing them by touch and under light similar to the lighting of the future hall.

What the frame and seat are made of

We assemble the frames of custom soft furniture for restaurants from plywood and timber, or mount them on a powder-coated metal frame, and fill the seat with high-density PU foam. The plywood-and-timber frame supports long sofa lines and corner modules, while the metal one is for chairs, bar stools and table bases that get moved several times per shift. The powder coating does not peel from mop hits or the legs of neighboring chairs. Dense polyurethane foam returns to shape after every seating and does not sag into a hollow where guests sit most often — on the edge of the sofa by the aisle. Upholstery is stretched in the soft furniture area of the same workshop where the frame is assembled, so the craftsman sees the item as a whole. Cheap soft filling compresses first, and the sofa loses its look before the fabric fades.

Which tabletop to choose for a restaurant table

Solid oak, veneer, laminated chipboard with PVC edge, HPL plastic and solid surface are all suitable for a restaurant table — the choice depends on the hall concept and cleaning schedule. An HPL plastic or solid surface tabletop withstands hot plates, spilled wine and daily treatment with cleaning agents. Solid oak and veneer give the warm wood texture valued in restaurants with signature cuisine, but they need careful maintenance and periodic refinishing. Laminated chipboard with 2 mm PVC edge on all ends is a practical option for large halls with identical tables. A metal table base holds the tabletop steady and does not wobble on uneven tiles. Any material works under a tablecloth, but for an open surface you should decide in advance what staff will wipe the table with after each guest.

Restaurant furniture in one style with the bar and hostess area

A guest reads the interior as a whole: from the stand at the entrance to the last sofa by the window. Chairs, the soft seating area, the bar and the welcome stand must match in wood tone, fabric and texture.

How to keep one tone of wood and fabric across the whole hall

We make custom restaurant furniture as one series in one decor — the whole hall, bar area and hostess stand under one estimate and one contract per site. When items come from different suppliers, the oak of the chairs turns out warmer than the oak of the tabletops, and the sofa fabric differs from the armchairs by half a shade, which is immediately noticeable under evening light. In our workshop, cutting, MDF painting and upholstery run in parallel for the entire order, so decor and fabric are taken from the same batch of material. The wholesale price for a series is calculated for the whole site at once, without separate invoices for each type of item. It is best to approve fabric and decor for the entire hall at once, even if some furniture is needed later: different batches of the same article sometimes differ in shade.

Hostess stand and bar area within the overall concept

We assemble the hostess stand from laminated chipboard and MDF fronts with a frieze for the venue's logo, and the bar area with a sturdy solid wood or HPL tabletop in the same decor as the hall seating. The carcass is made of Egger or Kronospan E1 class laminated chipboard 16–18 mm thick, all ends closed with 2 mm PVC edge so corners do not swell from wet cleaning. Drawers for menus, POS equipment and glasses are mounted on Blum, Hettich or Boyard slides — Blum has a 25-year manufacturer's warranty. Bar stools are selected to match the stand height and upholstered in the same fabric or faux leather as the sofas. The internal layout of the stand (shelves, niches for a tablet, sockets) is planned together with the hostess and bartender at the design stage, not redone after opening.

Can furniture be ordered later

We accept repeat orders within the same series: chairs, sofas, banquettes or tables in the same finish and the same fabric can be added several months after opening. This need comes up when a venue opens a summer terrace, a second hall or changes its seating for banquets. Repeat orders follow the original drawings and the pilot sample, so the new items match the dimensions and seating of the first ones. If a fabric has been discontinued, we select the closest match in color and texture from showroom samples and show you the option before production starts. It is best to record the fabric, finish and edgebanding codes in the contract or specification right away — then a year later the repeat order will match the first batch without hunting through photos.

How we check chairs and sofas before a batch goes into production

A mistake in one chair is repeated across a whole batch of dozens. That is why a series is first checked on a single item, and then once more in the workshop before dispatch.

Why a pilot sample matters

When making furniture for a restaurant as a series, we first produce a pilot sample — one chair, armchair or sofa module — and approve it with the client. The sample is assembled from the same materials as the batch: the same frame, filling, fabric and finish. The sample is brought to the hall or viewed in the workshop, and the owner, chef and manager can sit on it, pull the chair out, run a hand along the seam and see how the item looks next to the table. Changes at this stage cost the least: adjusting the backrest height or seat firmness on a single piece is easier than redoing forty. Spending half an hour on the sample at a real table setting is more useful than studying a drawing — you immediately see both the seat firmness and the height relative to the countertop.

What to check on a chair or sofa sample

  • Seating: the seat height relative to the table, the depth and the backrest angle should be comfortable for guests of different heights throughout dinner.
  • Stability: the chair does not wobble on the hall's tile, and the legs do not scratch the floor during frequent rearranging during a shift.
  • Seams and piping: the stitching is even, the fabric is taut without wrinkles, and the corners and piping match the approved sketch.
  • Color under lighting: the upholstery and finish are viewed under the light of the future hall, because warm lamps change the shade.
  • Recording the decision: all changes to the sample are written down so the batch replicates exactly the approved piece.

How the workshop checks the batch before dispatch

Before dispatch we carry out a control assembly in the workshop: the items are fully assembled and compared with the approved sample for dimensions, seating and color. Sofa modules are lined up to check the joints and fabric pattern alignment, and tables are set on their bases to make sure the countertops are level. All of this happens in our own 600 m² workshop, where the cutting, edgebanding, MDF painting and upholstery sections work side by side, so a remark goes straight to the craftsman in the right section and is fixed without shipping the item between contractors. An item with a defect does not go out, and the furniture is packed so that corners and upholstery are not damaged during transport across the city. A flaw found at the control assembly is fixed in hours, while one found in the hall on the eve of opening delays the entire launch schedule.

Restaurant furniture production to your opening date

Furniture is one of the last things to arrive — after the renovation, kitchen equipment and lighting. That is why its schedule is tied to the opening date and the progress of finishing work from day one.

How an order runs from measurement to installation

  • Measurement and design: we measure the hall free of charge and then prepare a 3D layout of the seating, lounge area, bar and hostess station.
  • Estimate and contract: we fix the items, materials, fabrics and decor in a single estimate and a single contract for the whole venue.
  • Pilot sample: we produce and approve the first chair or sofa module, after which we launch the series in the workshop.
  • Production: lead times for each option are in the price list on this page, and a rush order is possible by arrangement.
  • Installation and acceptance report: we deliver and assemble the furniture with our own team, then sign the acceptance report together after installation.

Installation to fit the venue's opening schedule

We produce restaurant furniture in our own workshop in Almaty, and we schedule installation with our own team to fit the venue's opening schedule, not a date that suits us. Delivery within the city and within a 30 km radius is free for a large order, beyond that — for an extra charge. The team assembles sofa lines on site, fixes modules to the wall, sets out tables according to the layout design and adjusts the supports for uneven floors. If the opening is postponed, we move the delivery to a new agreed date. We are a direct manufacturer: measurement, design, production and installation are handled by our own people, with no intermediaries. It is best to bring in the furniture after the finishing work and general cleaning — otherwise the upholstery and countertops will pick up construction dust before the first guests arrive.

Contract, payment and warranty for TOOs and sole proprietors

We work with TOOs and sole proprietors under a contract and invoice with bank transfer: 50 % prepayment, the remaining 50 % after signing the acceptance report. The closing documents are the acceptance report and the delivery note, and they are enough to put the furniture through the venue's accounting. Items carry a 24-month warranty under the contract, and Blum hardware carries a 25-year manufacturer's warranty. Over 13 years on the Almaty market we have completed more than 3 500 projects, including over 60 turnkey cafes, as well as restaurants, bars and coffee shops. Prices for each option are in the price list above on this page, and the wholesale price is calculated for the whole series. Before signing, it is worth checking that the specification lists all items, fabrics and decors — this will simplify both acceptance and any future reorder.

The bottom line on restaurant furniture

Restaurant hall furniture serves for years and shapes a guest's first impression, so decisions about it are made in a certain order. The main conclusions of the article are gathered below.

  • Layout comes first: the set of items is derived from the measurement, waiter walkways and the dinner format, not from a catalog.
  • Lounge area based on the actual wall: sofa lines and corner modules are designed to the real dimensions of the space, without gaps.
  • Materials built for load: contract fabrics, dense filling and durable countertops keep their look under daily cleaning.
  • One series for the whole venue: the hall, bar and welcome desk in a single decor look cohesive and are easy to reorder.
  • Sample before the batch: one approved chair or sofa module protects against a mistake repeated across the whole series.

12Calculation

How to calculate the cost of furniture for a restaurant

In the calculator, select the hall items and their quantity: chairs, tables, sofas, hostess or bar. The calculation will be sent to the manager on WhatsApp, who will clarify the fabric and decor.

01Type
02Quantity, pcs identical items
1 pc
130 pcs
03Carcass
04Fronts
05Hardware
06Options

13For business

What else we make besides restaurant furniture