Almaty Daily 10:00–20:00 +7 705 625 00 03 Book via WhatsApp
Long solid oak dining table with eight upholstered chairs in a bright living roomSolid wood dining table on massive supports with light chairs by the dining room wall

Custom wooden tables in Almaty

We'll design a table to fit your room's dimensions and match the wood species to your interior, fixing the price in the contract. Free measurement and 3D design within 1–2 days, 24-month warranty on the item per the contract.

Measurement and 3D design are free and carry no obligation · price fixed in the contract · Kaspi Instalments up to 24 months

★ 4,9
Google rating
from 10 days
lead time
24 mo.
warranty under contract

02Prices

How much a wooden table to order costs

The “from” price is for the item in the base configuration of the chosen species; the final price depends on size, structural complexity and finish. After a free measurement, we fix the cost in the contract.

  • 50% prepayment, the rest after installation and sign-off
  • Bank transfer for legal entities, price fixed in the contract
  • 1–2 days for a 3D design, revisions free
  • Kaspi Instalments over 3–24 months with no down payment
Get an exact quote
ItemMaterialLead timePrice
  • Metal base (loft)steelwith the itemfrom 25 000 ₸
  • Pine solid woodpine14 daysfrom 120 000 ₸
  • Console table in larch solid woodLarch solid wood, 120×​40 cm10–12 daysfrom 130 000 ₸
  • Birch solid woodbirch16 daysfrom 135 000 ₸
  • Oak solid woodoak18 daysfrom 160 000 ₸
  • Ash solid woodash18 daysfrom 160 000 ₸
  • With epoxy resinoak/​elm + resin22 daysfrom 200 000 ₸
  • Garden table in thermowood ashThermowood ash, 180×​90 cm14–20 daysfrom 200 000 ₸
  • Extendable table in beech solid wood (folding)beech solid wood12–16 daysfrom 210 000 ₸
  • Slab (single cut)elm/​oak25 daysfrom 220 000 ₸
  • Writing desk in cherry solid woodCherry solid wood, 140×​70 cm10–14 daysfrom 240 000 ₸
  • Coffee table in elm slab with epoxy riverelm slab, epoxy resin14–21 dayfrom 280 000 ₸
  • Bar table in walnut slab on a metal baseWalnut slab, metal, 140×​50×​110 cm14–21 dayfrom 320 000 ₸
  • "Depth" dining table with epoxy resinOak solid wood, epoxy resin, 160×​90 cm14–18 daysfrom 380 000 ₸
  • Dining table in walnut solid woodWalnut solid wood, 200×​100 cm15–20 daysfrom 450 000 ₸

03Calculator

How to calculate table parameters before ordering

In the calculator, choose the table type, species and dimensions — the calculation goes to the manager on WhatsApp, and they will confirm the configuration. We price the item as a whole or per linear metre of width if the table is made to your dimensions.

01Item

02Quantity of identical tables

1 pcs
1 pc6 pcs

03Finish

04Projects

Completed table projects in wood

01 / 06
Стол — проект MEBLIX, ЖК Esentai City, Бостандыкский район

01 / 06

Table

Esentai City residential complex, Bostandyk district

Dining table in solid oak, oil finish. Warm texture and honey tone, scratches can be sanded out. Lasts for generations.

Items
glued panel, oil
Materials
solid oak
Lead time
18 days
I want the same
Light wooden dining table with upholstered chairs in the kitchen-dining room

02 / 06

Country house table

Samal-2 microdistrict

An affordable lacquered solid pine table for a country house. Warm light tone, practical finish. Priced lower than hardwood species.

Items
glued panel, lacquer
Materials
solid pine
Lead time
14 days
I want the same
Стол в столовую — проект MEBLIX, мкр. Орбита-3

03 / 06

Dining room table

Orbita-3 microdistrict

An ash solid wood table with a light graphic grain pattern under lacquer. Sturdy and light, it fits perfectly into a modern dining room.

Items
light pattern, lacquer
Materials
solid ash
Lead time
18 days
I want the same
Дерево с металлом (лофт) — проект MEBLIX, ЖК Алматы Арена, Алатауский район

04 / 06

Wood with metal (loft)

Almaty Arena residential complex, Alatau district

An oak countertop on a slim steel base in loft style. Warm wood and black metal — a striking contrast.

Items
oak panel, steel support
Materials
oak, metal
Lead time
18 days
I want the same
Dark wood table with a drop-leaf half and chairs by the window

05 / 06

Tinted to wenge

khrushchyovka, Almaly district

An oak table tinted dark wenge while preserving the grain pattern. For a dark interior, oil finish.

Items
tinting, pattern preserved
Materials
solid oak
Lead time
18 days
I want the same
Круглый — проект MEBLIX, ЖК Изумрудный квартал, Бостандыкский район

06 / 06

Round

Izumrudny Kvartal residential complex, Bostandyk district

A round table made of solid ash on a central support. Natural wood and a cozy shape without corners for a family kitchen.

Items
round, central support
Materials
solid ash
Lead time
18 days
I want the same

3 500+

MEBLIX projects since 2013 — we'll show you wooden tables similar to yours on WhatsApp or in the showroom.

Show similar

05Principles

Why it's better to order a table than buy a ready-made one

  1. 01

    Construction tailored to your room

    We design the table based on the dimensions of the room: the width of the countertop, height and overhang are calculated so that people can sit comfortably and not bump into walls. The apron and legs are calculated for the span length, so the table doesn't sag in the middle.

  2. 02

    Reliability of joints

    We make corner joints and leg fastening taking into account the weight of solid wood and slab, not "by eye". Blum, Hettich and Boyard hardware is designed for years of daily load; Blum hardware comes with a 25-year manufacturer's warranty.

  3. 03

    Everyday convenience

    The height, shape of the countertop and radius of the corners are selected based on the height of the owners and the area of the room. Rounded edges and a well-thought-out overhang reduce the risk of hitting the edge in a small kitchen or a narrow hallway.

  4. 04

    How to read the drawing before signing

    In the drawing and specification, check the species, countertop dimensions and height, leg fastening scheme and finish type. These parameters are fixed in the contract, so they make it easy to verify the finished item upon acceptance.

  5. 05

    How solid wood behaves with humidity

    Wood reacts to humidity fluctuations in the apartment: in dry air the countertop shrinks slightly, in humid air it expands. That's why the construction includes gaps and movable fastenings so the solid wood doesn't crack.

  6. 06

    What is fixed in the contract besides the price

    In addition to the cost, the contract specifies the wood species, exact dimensions, finish type and configuration — for example, whether hardware or a base is included. These points help verify the finished table against the order without discrepancies.

06How ordering works

How ordering works wooden table

Book a free measurement
  1. 01

    5 minutes

    Consultation

    Message us on WhatsApp or call. We discuss the task, style and budget, show similar projects and give a price estimate.

  2. 02

    within 24 hours

    Measurement

    The measurer comes free of charge anywhere in Almaty, takes laser measurements accurate to 1 mm, and marks sockets, pipes and uneven walls. Brings samples.

  3. 03

    1–2 days

    3D design and estimate

    We show the furniture in its colours and materials and make changes free of charge until you approve. Price, lead time and installation date are fixed in the contract.

  4. 04

    from 10 days

    Production

    The order starts with a free measurement and 3D design: a specialist takes the room dimensions and clarifies your wishes. Then we fix the price and parameters in the contract, after which the table goes into production.

  5. 05

    1 day

    Delivery and installation

    We deliver, bring in, assemble, and level the table. After installation, we clean up.

  6. 06

    24 months

    Sign-off and warranty

    You check every mechanism, sign the certificate and pay the balance. The warranty starts that day, with service response within 1–2 business days.

A stack of Egger and Kronospan laminated chipboard sheets in our workshop warehouse before cuttingA CNC machine cuts the sheet into a countertop and parts for the future tableAn edgebanding machine seals the countertop edges at the MEBLIX workshopA craftsman coats table parts with lacquer and enamel in our workshop's spray boothA craftsman checks the table's trial assembly in the workshop before shipping to the customerFinished solid oak coffee table in front of a light sofa in the living room

01 / 06

07Production

Where your table to order is made

Six steps in our 600 m² workshop. Each can be seen with your own eyes — showroom and production under one roof. We sand the solid wood or slab countertop in several passes and assemble the table in the workshop before shipping to check geometry and stability.

  1. A stack of Egger and Kronospan laminated chipboard sheets in our workshop warehouse before cutting
    01

    Egger · Kronospan

    Board

    Egger and Kronospan boards arrive at the workshop warehouse. For countertops we use 25–38 mm boards, and we dry solid oak and ash to furniture moisture content.

  2. A CNC machine cuts the sheet into a countertop and parts for the future table
    02

    Laser measuring to 1 mm

    CNC cutting

    A design engineer prepares the table drawing, and the machine cuts the board according to it. We take dimensions from laser measurement — accuracy 1 mm.

  3. An edgebanding machine seals the countertop edges at the MEBLIX workshop
    03

    Edge banding · drilling

    Edging and drilling

    The edge banding machine seals the ends of the countertop, then we drill holes for supports, drawer slides and mechanisms.

  4. A craftsman coats table parts with lacquer and enamel in our workshop's spray booth
    04

    Any RAL colour

    Lacquer and enamel

    A finishing specialist paints parts to RAL in the spray booth, and coats solid wood with oil or several layers of lacquer.

  5. A craftsman checks the table's trial assembly in the workshop before shipping to the customer
    05

    Pre-assembly in the workshop

    Assembly and inspection

    We assemble the table in the workshop before delivery: we check that it doesn't wobble and how the drawers and mechanisms move. The quality control department signs off the item for shipment.

  6. Finished solid oak coffee table in front of a light sofa in the living room
    06

    Assembly in 1 day

    Your table

    We deliver, assemble and level the table in 1 day and clean up after ourselves. Warranty is 24 months from signing the acceptance certificate.

08Team

The craftsmen behind wooden tables

MEBLIX workshop craftsmen who make and assemble furniture to order.

01 / 07
Aidyn Bolenov, Cabinet furniture repair craftsman

Aidyn Bolenov

Cabinet furniture repair craftsman20 years

★ 4.99 · 73 ratings

Aleksandr Martynenko, Furniture and kitchen unit assembler

Aleksandr Martynenko

Furniture and kitchen unit assembler23 years

★ 4.97 · 300 ratings

Andrei D., Made-to-order furniture maker

Andrei D.

Made-to-order furniture maker7 years

★ 4.26 · 32 ratings

Akzholtai U., Furniture maker

Akzholtai U.

Furniture maker5 years

★ 4.23 · 30 ratings

Vasilii Krasnov, Joiner and carpenter

Vasilii Krasnov

Joiner and carpenter20 years

★ 5.0 · 113 ratings

Viktor Gurov, Furniture front and hardware fitter

Viktor Gurov

Furniture front and hardware fitter17 years

★ 4.61 · 92 ratings

09Materials

What we make tables to order from

For a table, the hardness of the species and the stability of the geometry matter, so we select solid wood, slab, epoxy resin, metal or thermo-ash based on the load and the installation location.

  • Solid oak sample under oil for a custom wooden table countertopSolid oakoil or lacquer
  • Natural veneer sample with wood grain for a table countertop and cabinetsVeneeroak, walnut, ash
  • Smooth MDF sample in matte enamel for table fronts and underframeEnamelled MDFany RAL colour, matte or gloss
  • Laminated chipboard sample with wood decor for a custom table countertop and cabinetLaminated chipboardclass E1, 16–18 mm, 40+ decors
  • Tempered glass and lacquered MDF sample for a table countertop and shelvesGlass and lacobeltempered
  • Artificial stone sample for a table countertop with no visible seamsSolid surfaceseamless joints

10Article

Custom Wooden Tables in Almaty Made in Our Own MEBLIX Workshop

Temirzhan Nurpeisov, Furniture assembly carpenter
Author
Temirzhan NurpeisovFurniture assembly carpenter
Published
Updated

MEBLIX builds custom wooden tables for apartments and houses across Almaty, from a free measurement and a 3D project in 1–2 days to installation by our own crews. We work as a direct manufacturer with a 600 m² workshop, choose the top material for your conditions, and back each table with a 24-month contract warranty.

Ordering a Wooden Table From a Workshop or Building It Yourself

The first decision a buyer faces is not the wood or the finish but the route: build the piece alone or hand it to a workshop. The room itself usually settles the argument before any drawing starts.

When a Workshop Beats a DIY Build

A DIY table makes sense for a simple rectangular top on a flat floor, but one that must fit an alcove, hide an uneven wall or carry daily family load is faster and safer to order from a workshop. A custom wooden table has to answer to the room, and older housing stock rarely offers square corners or level screed. A solid-wood panel miscut during home assembly cannot be re-glued back into a single board, and a top shaped by hand against a wavy wall leaves a visible gap along the edge. A workshop measures the deviation first, then cuts to that number. The hidden cost of DIY is not the boards but the tooling and the mistakes — one wrong cut on a solid-wood top means starting the slab over, while a shop absorbs that risk inside its own process.

How to Tell a Real Manufacturer From a Reseller

We are a direct manufacturer: MEBLIX runs its own 600 m² workshop in Almaty with cutting, edge-banding, painting and a control assembly before anything ships, so the table you approve is the table we build. That single site also holds the board stock from Egger and Kronospan and the Blum, Hettich and Boyard fittings, which means a specification change is a call to the shop floor rather than a new purchase order. Ask any supplier three questions — where the board is cut, who signs the acceptance act, and whose crew installs it; if the answers point to three different companies, you are talking to a reseller.

What a Direct Workshop Controls That a Middleman Cannot

  • Measurement: our own surveyors record the room on site, not from a photo you send in.
  • Project: designers turn those numbers into a 3D model you approve before cutting.
  • Production: the same team cuts, edges and paints both the top and the base.
  • Control assembly: the finished piece is dry-built in the shop before it ships.
  • Installation: our own crews mount it and sign the acceptance act with you.

Choosing a Top Material for a Wooden Table in a Real Almaty Apartment

In a heated apartment the surface material decides how a custom wooden table ages, not the species alone. We build six families of tops, and each reacts differently to dry indoor air.

Solid Wood, Laminated Board, HPL, Acrylic, Quartz or Ceramic

Top materials compared by use case and weak point
MaterialBest forWatch out for
Solid woodWarm dining tables, repairable topsMoves with humidity, needs stable air
Egger / Kronospan boardEveryday family tablesEdges must be sealed against moisture
HPLHigh-traffic family tablesHarder to repair a deep scratch
AcrylicSeamless matte lookSensitive to heat and sharp cuts
QuartzHeavy daily use, low upkeepCold feel, heavier base needed
CeramicHeat and stain resistanceThin slabs need a solid substrate

Which Wood Species Hold Up in Dry Indoor Air

For a heated apartment the species matters less than how the surface is built — a well-sealed, properly supported solid panel stays stable, while a thin unsupported one of any species can cup. Pine and oak both move as the air dries out under central heating, and the difference shows at the edges, where a rigid frame leaves no room. Our technologists size the base and the fastening so a wide panel expands across its width without stress. A solid board moves across its width, not its length, so the frame must let it breathe. Clamping a wide panel rigidly to a frame is what produces the cracks buyers fear, and ribs underneath stop the sag long before the wood itself gives way.

Matching the Top to Your Kitchen Colour and Interior

We match the top to your kitchen by finish and tone, and we can build the table as part of a larger furniture set so the wood, edge and colour read as one interior. Egger and Kronospan decors cover the same palette we use for cabinets, which lets one sample govern the whole room. Ordering the table together with the surrounding furniture means a single finish sample guides every panel, so a matched set rarely shows the tone clash a separately bought table does. Bring a drawer front or a cabinet sample along and we will match against the real board, not a screen image.

Why the Wooden Table Stays Steady and Does Not Sag

A wobble or a bow is rarely a material problem. It is a build problem — how the frame spreads load, how the surface is fixed to it and how the joints hold under daily weight.

The Base and Joints That Carry the Load

We design the base with stiffening ribs and fasten the surface so the load of elbows, plates and children spreads into the legs instead of flexing the panel. The apron ties the legs into a closed rectangle, cross-bracing keeps that rectangle square, and adjustable feet compensate for the slight floor unevenness common in older apartments across the city. Fasteners sit close enough that a solid plank cannot lift between them, and every joint is glued and mechanically reinforced rather than relying on screws alone. A table rocks not because the surface is weak but because the frame has too few contact points; adding a cross-brace or a wider foot fixes the wobble that a thicker slab never would.

Metal or Wood Base and How the Top Meets It

A steel base gives a slim, stable support for a heavy surface, while a wooden version keeps the whole table in one material; the fastening between them is what decides how either performs. A powder-coated steel frame carries a ceramic or quartz panel with minimal visual bulk, while a solid oak underframe suits a thick slab and can be shaped to match the rest of the room. The two materials expand at different rates, so the connection needs slotted or flexible fixings — a rigid bolt driven through both is what cracks a solid plank over a season of heating.

Species or Assembly, What Really Decides Durability

  • Joints: tight, reinforced connections resist the daily push and pull of chairs far longer than any single wood choice.
  • Edge sealing: sealed ends stop moisture from entering the panel and lifting the veneer along the rim.
  • Fastening: flexible fixings let a solid surface move with the seasons instead of splitting at the screw line.
  • Base rigidity: cross-bracing keeps the frame square under load, so the piece does not rock on uneven flooring.
  • Control assembly: a dry build in the workshop catches a loose joint or a misaligned leg before the item leaves the bench.

Wooden Tables for Tight Kitchens, Niches and Bay Windows

A standard size rarely matches the actual niche or bay window, so a piece built to the room beats one squeezed into it. Here is how the design adapts to an awkward spot.

Fitting a table into an awkward corner or bay window

We build the top to the exact outline of the space, including a curved or angled contour where the wall is not straight. A custom wooden table for a narrow kitchen starts with the measured footprint: the technologist records the niche depth, the distance to the radiator and the swing of the window, then the slab is cut to that shape in our 600 m² workshop. Solid wood takes a profiled rim well, and we shape the corner radius to the walkway so nobody brushes the surface on the way to the sink. For a bay window, the piece often follows the glazing line as a trapezoid rather than a rectangle, gaining usable seating where a factory item would leave a dead gap.

When the walls and floor are not level

We measure the actual gaps at the wall and the floor, then adjust the base so the table sits level even where the room is not. Walls rarely give a true right angle, so the surveyor records the deviation along the skirting and under the surface before the frame goes into cutting. Legs are then trimmed to the lowest point and fitted with adjustable feet, and the apron is set so the joint meets the wall without a visible slit. Our crews install on site and check the level with a spirit gauge after assembly, not only in the workshop. Levelling the base on site is what keeps a table from rocking, which a fixed factory height cannot correct, and it is the reason we never ship a frame pre-set to a nominal number.

Acceptance, Warranty and Care

This section covers the handover moment, what the contract actually protects, and how to look after solid wood, board and acrylic tops so the finish holds up over years of daily use.

How to Check the Table at Handover

  • Level: the top sits flat and does not rock when you press a corner.
  • Joints: no gaps, creaks or movement where the base meets the top.
  • Edges: sealed ends and a clean finish all round, with no rough spots.
  • Fit: the table meets the wall or alcove the way the 3D project showed.
  • Load: it stays steady with weight on the centre and again on the edge.

What the Warranty Covers and How Payment Works

Each table carries a 24-month contract guarantee, Blum fittings keep their 25-year manufacturer terms, and payment runs as 50 % upfront with the rest after the acceptance act. We sign that act only once installation is finished, so the table is checked in place before the job is closed. Our cover applies to the build itself — the base, the joints and the top as assembled. Fittings from Hettich and Boyard follow their own terms, while Blum hinges, lift mechanisms and drawer runners carry the producer's 25 years. Payment is by bank transfer, with the second half released on the signed act. A contract guarantee is only as good as the party behind it, so confirm that the workshop that built the table also services it — a promise passed through a reseller depends on a third party you never meet.

Caring for Solid Wood, Board and Acrylic Tops

Solid wood wants stable indoor air and a wipe with a damp cloth, board and HPL tops need their edges kept dry, and acrylic tops should be kept from heat and sharp cuts. Wood moves with humidity, so in a flat with dry winter heating keep the table away from radiators and do not leave a wet glass standing overnight. Laminated and HPL surfaces from Egger and Kronospan resist spills, but water that sits on an open edge swells the core — dry the rim after cleaning. Acrylic is warm to the touch and easy to polish, yet a hot pan or a knife drawn across it leaves a mark no cloth will lift. Most table damage comes from heat and standing water rather than daily use, so a trivet and a quick wipe after dinner do more for the finish than any special product.

The bottom line on wooden tables

A table that still sits level after years of daily use comes down to a handful of decisions made before the first board is cut.

  • Material: choose the top for your indoor conditions first and for looks second — dry heated air is hard on solid wood.
  • Build: a stiff base and fastenings that allow the top to move keep a solid slab from cracking at the joints.
  • Process: a free measurement and a 3D project catch uneven walls and tight alcoves before anything is cut.
  • Acceptance: load the table, check the joints and the alignment before the handover act is signed.
  • Care: stable humidity, a trivet under hot dishes and a quick wipe protect the finish for years.

11FAQ

Frequently asked questions about a custom wooden table made to order

Didn’t find the answer? Message us — a manager replies, not a bot.

Ask on WhatsApp
01How is a custom wooden table paid for?

A 50 % deposit is paid first, the balance — after signing the acceptance certificate, that is, after installation. We work by bank transfer. Before paying the balance, you inspect the finished table and check that everything matches the contract.

02Can I see a finished table before ordering?

Yes, in our showroom in Almaty, by prior appointment via WhatsApp, you can see samples of wood species and hardware, and also assess the build quality on examples. If the option you need is not in stock, the craftsman will show similar items and tell you about the materials.

03Who assembles and installs the table on site?

Installation is carried out by our team after delivery, and we sign the acceptance certificate after installation. The table arrives after a test assembly in the workshop, so the parts fit into place without adjustment. If you need help with placement, the craftsman will advise on site.

04Which wood species are best for a dining table?

For a dining table, oak, ash or birch are chosen most often — they are dense and resistant to daily load. Pine is softer and better suited to country or coffee tables. Our price list includes options in solid pine, birch, oak, ash, walnut, cherry and larch, as well as elm and oak slabs.

05How much load does a wooden table withstand?

We calculate the structure for the span length and the weight of the solid wood or slab, so a dining table easily withstands the family's daily seating. For slabs and long worktops we select a reinforced rail and supports. The craftsman will confirm the exact parameters for your size during the measurement.

06Can I order a table from an elm or oak slab?

Yes, an elm or oak slab is one of our main items, and a guide price is in the price list on this page. Each cut is unique in pattern and live edges, so the final cost is calculated after choosing a specific blank. We also make tables with epoxy resin, and their price is in the list too.

07How long does it take to make a solid wood table?

For exact lead times for each option, see the price list on this page — they depend on the item and the chosen material. If you need a table by a specific date, mention it in your request: a rush order is possible, and the manager will agree on the schedule. Measurement and 3D design take 1–2 days and are free.

08What's included in the free measurement and 3D design?

Measurement and 3D design are free and take 1–2 days: the craftsman takes the room dimensions and clarifies your wishes, then you see how the table will fit into the interior. After that we fix the price in the contract. You can book an appointment in our showroom in Almaty, by prior appointment via WhatsApp.

09Where can I see wood and hardware samples?

Come to our showroom in Almaty, by prior appointment via WhatsApp — there you can see wood species and hardware in person. If it is more convenient, send a photo of your interior to mail@meblix.kz, and we will select options in advance.

10Can I order a table of a non-standard size or shape?

Yes, we make the table to the dimensions of your room: non-standard length, rounded corners, a folding design or bar height. We discuss the shape and size during the measurement visit, and that's also when we choose the wood species and finish. The price is fixed in the contract before work begins.

12Reviews

Reviews of MEBLIX wooden tables

4,9

average rating
on Google and Zoon

See all reviews
MEBLIX showroom on Abylai Khan Ave

13Showroom and workshop

Touch the samples for wooden tables in our showroom

200+ fronts and materials, Blum and Hettich hardware to try in person. The workshop is in the same building.

Address
115/60 Abylai Khan Ave, Almaty
Hours
Daily 10:00–20:00
Phone
+7 705 625 00 03

14Other types

What else we make besides wooden tables