A custom bed from MEBLIX is built to the exact dimensions of your bedroom: a free measurement, a 3D design in 1–2 days, our own 600 m² workshop in Almaty and installation by our own crews. We have been in the business for 13 years, completed more than 3 500 projects and give a 24-month warranty under the contract.
A shop-bought bed is tied to a standard size grid, while a bedroom in Almaty is rarely standard. The result is gaps along the wall, empty space by an alcove and centimetres you cannot use for anything.
Why a ready-made bed rarely fits the room perfectly
Ready-made beds come in a fixed range of widths and lengths, so in a room with an alcove or a sloping corner they leave gaps and dead space. The frame is designed for the standard 90, 120, 140, 160 and 180 cm sizes, while walls in panel buildings and new developments are often out of plumb and out of square. A measurer records more than the length of the wall: the door opening, the radiator under the window and the ventilation shaft take up another 10–20 cm, and a catalogue model no longer fits in practice. Before buying a ready-made model, measure not only the wall but also the door opening, the radiator and any projections. These are what most often eat up the centimetres that stop a bed from fitting.
Ordering a bed to fit an alcove or a small bedroom
We build the bed to fit an alcove, a projection or a small bedroom exactly. The measurer takes the dimensions on site, and our technologists carry them into the design without rounding them to a standard size. The measurement and 3D design take 1–2 days, and at this stage you can already see where the headboard, the plinth and the approaches to the bed will sit. In a small bedroom, width is not the only thing that matters: headboard height and plinth depth make a real difference too. Discuss them at the measurement, or the bed will fit but block the way to the wardrobe. We also check how the wardrobe doors and bedside drawers open, since with a non-standard bed width they can hit the headboard.
Single, small double and double beds for different rooms
- Single bed: a narrow sleeping area for a kids' room or guest room, where a clear path to the wardrobe and window matters.
- Small double: an in-between option for a room where a full double does not leave enough space around it.
- Double bed: a wide sleeping area for a spacious bedroom, sized by the floor plan rather than the catalogue.
- Non-standard length: we lengthen the bed for tall sleepers or shorten it for a small room with a balcony door.
- Clearance check: at the measurement we make sure there is room for bedside tables and a free step on both sides of the bed.
Lift-up storage beds and what fits underneath
A lift-up mechanism turns the space under the mattress into a proper storage compartment. How well it works depends on the size of the bed and the type of base.
How a gas lift mechanism works
We fit a gas lift that raises the base together with the mattress and opens up the storage compartment underneath. It combines gas springs with a lever system that spreads the force across both sides of the base, so you can lift the sleeping area with one hand and it stays up on its own. Because we build lift-up beds in our own workshop, the lifting unit is assembled and tested during a trial assembly before the bed leaves us. We use proven hardware from Blum, Hettich and Boyard. Blum gives a 25-year manufacturer's warranty, which makes sense for lifting units that carry a load every single day. The heavier the mattress, the more important it is to choose a mechanism with spare capacity. At the measurement we ask about the mattress weight and thickness so the lift does not become stiff after a year.
Combining a lift-up base with drawers in one bed
A lift-up base and drawers in the plinth can be combined in one bed. The compartment and the drawer units sit at different levels, so they do not get in each other's way. The gas lift raises the base upwards, while the drawers slide out of the plinth to the side or at the foot, and the two storage areas work independently. Before shipping we check the gas lift travel, the gaps between the fronts and how smoothly the drawers run. Drawers in the plinth are best fitted with soft-close runners. They get used a lot, and without soft-close the fronts gradually drift out of line. Plan this option into the design at the measurement stage, because adding storage to a finished bed later is much harder.
Storage options compared
Storage options compared| Storage option | What goes in | How it opens | Best for |
|---|
| Compartment under the mattress | Bedding, duvets, seasonal items | The base lifts on gas struts | People who need a lot of space |
|---|
| Drawers in the plinth | Small items, linen, books | Pull out on soft-close runners | People who want quick access |
|---|
| Compartment and drawers together | Large and small items | Lift plus pull-out | Spacious bedrooms |
|---|
Bed frame materials and hardware
The frame material and type of base decide whether a bed will creak or sag after a year. That is why they should be chosen for the everyday load, not just for the colour of the fronts.
Choosing a frame that handles everyday loads
We make bed frames from Egger and Kronospan boards, foil-wrapped or enamelled MDF and solid wood. A frame consists of the side rails, the headboard and the base, and the side rail, the long beam the sleeping area rests on, takes most of the load. Egger and Kronospan laminated chipboard 16–18 mm thick works well for single beds and for doubles without a lift-up mechanism. MDF in foil or enamel is the choice when you want a shaped headboard, and solid wood when the frame is on show and its texture matters. On a double bed with a lift-up mechanism, the stiffness of the side rail matters more than the thickness of the headboard. This is not the place to save money, or the base will warp over time.
Slatted base or solid platform for the mattress
Slats spread the weight of the mattress and let it breathe, while a solid platform is firmer and suits mattresses that need even support. An orthopaedic base is made from bent birch slats held in a frame on holders. A solid sheet of laminated chipboard or plywood is used for springless foam and latex mattresses, which need support over their whole area, and for memory foam models. The spacing between slats depends on the type of mattress. For a pocket spring unit it is made tighter, otherwise the springs drop into the gaps and the filling loses its shape faster. If you have already bought your mattress, tell the specialist its type and weight, and the base will be assembled with the right spacing and number of slats.
Reliable hardware for a bed
- Blum: Austrian mechanisms and hinges with a 25-year manufacturer's warranty, fitted to lift-up beds and beds with drawers.
- Hettich: German hardware for runners and connecting joints, designed for drawers that are opened every day.
- Boyard: fixings and mechanisms for joints that need extra strength in a compact frame.
- Trial assembly in the workshop: before shipping we assemble the whole bed and test the side rail joints under load.
- Joint check: creaking usually comes from where the side rail meets the headboard rather than from the mechanism, so we tighten and secure these joints before installation.
How a custom bed order works from measurement to installation
Ordering a bed follows a clear sequence: measurement, 3D design, production in the workshop, trial assembly and installation in your home. At every stage you can see what is happening with your bed and what you will get at the end.
Where the order starts and what the 3D design includes
The order starts with a free measurement, after which we prepare a 3D design in 1–2 days. The visualisation shows how the bed will sit in the room and how it works with the rest of your furniture. The measurer records the bedroom dimensions, ceiling height and the position of sockets and projections, and MEBLIX technologists build this data into the design. A made-to-measure bed then gets exact dimensions for the sleeping area, headboard height and frame depth, taking your mattress into account. When you review the 3D design, check not only the overall dimensions but also the height of the headboard relative to sockets and switches. That is the level people most often get wrong.
Dealing with uneven walls and corners
If the walls and corners are uneven, we build compensation gaps into the design and fit the bed on site. The measurer records the deviations, so the bed sits without gaps or skew. A bed in a non-standard size is made precisely to the dimensions of the bedroom: we calculate the frame from the smallest dimension of the opening and cover the junction with the wall with a decorative strip that the installation crew trims on site. In older buildings in Almaty, walls often lean away from vertical towards the ceiling. In that case it is better to give the headboard an adjustable fit rather than pushing it tight against the wall. A gap of a few millimetres is invisible, but it prevents creaking when the frame settles on an uneven floor. We record the deviations in millimetres for each wall, and the workshop uses these figures to set the geometry of the frame.
Production times and installation by our own crews
Production time depends on the product and the material and is shown in the price list on this page, and urgent orders are possible. Installation is carried out by our own crews, and the acceptance certificate is signed once the bed is in place. Our 600 m² workshop handles cutting, edge-banding, painting and trial assembly. The bed is fully assembled before shipping, so everything lines up on site. Delivery within the city and up to 30 km is free for larger orders, and beyond 30 km it is charged extra. Urgency usually depends less on the workshop itself and more on coated materials. If your deadline is tight, discuss at the measurement which finish can be ready by the date you need.
Warranty, quality and where to order a bed in Almaty
A bed the manufacturer stands behind under a contract comes down to the warranty, quality control and an in-house workshop, and these matter as much as the design. Here is what is put in writing and how to make the finish last longer.
What the warranty on a custom bed covers
We give a 24-month warranty on the bed under the contract, and Blum hardware carries the manufacturer's 25-year warranty. The terms are fixed in the contract before work begins. The document also sets out lead times for each option and what to do if you need to contact us: first you describe the issue, then we agree a visit or rework in the workshop. Payment is just as transparent: 50 % prepayment, with the remaining 50 % due after you sign the acceptance certificate, which we issue after installation. The warranty applies only with proper use. Overloading the storage compartment and lifting the mechanism by the headboard are the most common reasons a bed loses its geometry.
Caring for your bed so the finish does not wear
- Dry cleaning: dust with a soft cloth once a week, as abrasive sponges leave micro-scratches on foil and enamel.
- Damp wiping: use a lightly wrung cloth without alcohol or solvents and wipe the surface dry straight away.
- Headboard: do not leave wet towels or drinks on it, as moisture under the pillow softens the edging.
- Storage compartment: do not overload it, and do not lift the mechanism by the headboard, since the load goes onto the fixings.
- Direct sunlight: keep the furniture out of constant sun, otherwise the foil fades unevenly.
Ordering directly from the manufacturer in Almaty
You can place an order with us directly: our own 600 m² workshop, a showroom in the city, and free delivery within the city and up to 30 km for larger orders, with a surcharge beyond 30 km. Cutting, edge-banding, painting and trial assembly are all done in our workshop, and the bed is neither resold nor assembled by a third party. The measurement and 3D design are free and take 1–2 days, and urgent orders are possible if the design allows us to fit the schedule. We are open daily from 10:00 to 20:00 and accept bank transfers. As the direct manufacturer we are responsible for the bed at every stage, from cutting to installation. If anything needs adjusting, one company handles it all.
The bottom line on beds
Here is a summary of what to remember before ordering a bed, from the exact dimensions of your bedroom to choosing a base that suits the load.
Summary
- Precise fit: a made-to-measure bed is built to the size of the room, including alcoves, projections and uneven walls where ready-made furniture leaves gaps.
- Built-in storage: a lift-up mechanism and plinth drawers can be combined in one bed if they are planned at the design stage.
- Frame for the load: the material and type of base are chosen for daily weight and sleeping habits, not just the colour of the finish.
- Check before production: the measurement and 3D design show how the bed will sit in the bedroom before any parts are cut.
- Assembly and warranty: a trial assembly in the workshop and warranty obligations under the contract reduce the risk of creaking, skewing and gaps after installation.